626839
7
Verklein
Vergroot
Pagina terug
1/19
Pagina verder
1110
Note: After you have disabled a number button, you will notice that an
asterisk appears after the profile name when you return to operation mode.
The disabled button will also not appear on control panel.
Loading a new prole on your blender will reset the profiles and enable all
the cycle buttons again.
Permanently Disable Cycle Buttons
To permanently change the cycle buttons in a profile you can export the revised
profile to a USB drive, and then import the profile on the blender� Or you can
disable any number using the Blend Wizard (my�blendtec�com), and then export
the revised profile to the blender�
4.1.9 The Blend Wizard
In addition to using the profiles and cycles preprogrammed on your blender, you
can use the Blend Wizard to create custom profiles and cycles� For instructions
on using the Blend Wizard to easily develop custom profiles and cycles, visit
my�blendtec�com
Importing Custom Profiles and Cycles
After you’ve created your custom profiles and cycles using Blend Wizard and
downloaded them to a USB flash drive, use the follow steps to import the file to
your blender
1Use a Phillips screwdriver to remove the USB cover at the top of the right side of
the blender�
2� Plug the USB flash drive into the blender’s USB port�
Note: If the blender is in manual or automatic operation mode, the USB
flash drive menu will automatically load on the screen. If the blender is in
programming mode, go to the main menu and select USB Flash Drive.
3� Select Import Profile from the USB flash drive menu
4� Scroll through the items on the flash drive and locate the desired custom profile
file (by default named stealthbpf)�
Note: Items with a + sign next to them are folders; if the custom profile file
is in a folder, press the select button to open the folder.
5� Select the desired file� You will then be asked whether you want to import the
selected file�
6� Press the select button again to start the import process� After the file has been
imported, the profile in the file will be automatically loaded as the active profile
on the blender
7Remove the USB drive from the blender, and secure the cover on the USB port
with a Phillips screwdriver
4.1.7 Selecting the Desired Profile
1Press and hold the cancel/exit button for 3 seconds
2� Select Profiles from the menu by touching the select button�
3� Use the scroll and select buttons to select either the Standard Profiles or
Custom Profiles category�
4� After selecting the Standard or Customer Profile category, you can scroll through
the profiles in the category and select the desired profile�
5� “Make this the active profile?” will appear on the screen� Press the select button
to confirm or the cancel/exit button to return to the previous menu
4.1.8 Changing Programmed Cycle Buttons
Temporarily Change Cycle Buttons
To temporarily change cycle buttons when working in a selected profile,
complete the following steps:
1Press and hold the cancel/exit button for 3 seconds
2� Use the scroll button and then select Blend Cycles from the menu by
touching the select button�
3� Use the select button to choose the Standard or Custom Blend cycles
4� Use the scroll button to find your desired cycle, then press select
5� Enter the number you want to assign to the cycle, then press select
Note: After you have customized a cycle to a number button, you will notice
that an asterisk appears after the profile name when you return to operation
mode. Loading a new profile on your blender will reset the profiles back to
default cycle buttons.
Permanently Change Cycle Buttons
To permanently change the cycle buttons in a profile you can export the revised
profile to a USB drive and then import the profile on the blender� Or you can edit
the profile using the Blend Wizard (my�blendtec�com), and then export the profile
to the blender�
Temporarily Disable Cycle Buttons
To temporarily disable a number or cycle button when working in a selected
profile, complete the following steps:
1Press and hold the cancel/exit button for 3 seconds
2� Use the scroll button and then select Blend Cycles from the menu by
touching the select button�
3� Use the select button to choose the Standard Blend Cycles
4� Use the scroll button to find Disable Button, then press select
5� Enter the number button you want to disable, then press select
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Blendtec STEALTH 885 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Blendtec STEALTH 885 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Blendtec STEALTH 885

Blendtec STEALTH 885 Gebruiksaanwijzing - English, Français, Espanõl - 156 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info