626838
9
Verklein
Vergroot
Pagina terug
1/19
Pagina verder
1514
Blend Cycle Pause
When in automatic mode, this setting allows you to pause and resume a blend
cycle at the same time and speed
To enable or disable the Blend Cycle Pause feature, complete the following steps:
1Press and hold the cancel/exit button for 3 seconds
2� Use the scroll button and then select Settings from the menu by touching the
select button�
3� Use the scroll button and then select Blend Cycle Pause from the menu by
touching the select button�
4� Use the select button to toggle between disabling and enabling the blend cycle
pause�
Note: When the Blend Cycle Pause setting is enabled, a cycle can be
paused by pressing any button. If the Blend Cycle Pause function is
disabled, pressing any button disabled will simply stop a blend cycle.
5� Press the cancel/exit button to return to the previous menu�
Slider Lockout (Stealth 875 only)
The Slider Lockout feature allows you to disable the slider bar on the control
surface� When this feature is enabled, only profiles on the blender can be used
to operate the blender
To enable or disable this feature, complete the following steps:
1Press and hold the cancel/exit button for 3 seconds
2� Use the scroll button and then select Settings from the menu by touching the
select button�
3� Use the scroll button and then select Slider Lockout from the menu by touching
the select button�
4� Use the select button to toggle between disabling and enabling the slider lockout
5� Press the cancel/exit button to return to the previous menu�
Language
The menus on the Stealth’s display are available in three languages:
English, French, and Spanish�
To select a language, complete the following steps:
1� Press and hold the cancel/exit button for 3 seconds�
2� Use the scroll button and then select Settings from the menu by touching the
select button�
3� Use the scroll button and then select Language from the menu by touching the
select button�
4� Use the scroll button to find your desired language, then press select
5� Press the cancel/exit button to return to the previous menu
4.1.11 Blender Statistics
Blend Cycle Counts
You can review the total number of cycles run, the number of cycles run for
each control surface number, the number of times the pulse button has been
used and the number of times the slider control bar has been used (For
Stealth 875 only)�
1Press and hold the cancel/exit button for 3 seconds
2� Use the scroll button and then select Cycle Counts from the menu by touching
the select button�
3� Use the scroll button to see the number of cycles run in each category�
4� Press the cancel/exit button to return to the previous menu�
Note: The pulse count refers to pulse sets. For example, touching the pulse
button 5 times in a row will register as 1 pulse count. Touching the pulse
button, then a cycle number and then the pulse button will register as 2
pulse counts.
Diagnostic Error Log
You can review the diagnostic errors that have been logged on the blender�
1Press and hold the cancel/exit button for 3 seconds
2� Use the scroll button and then select Diagnostic Counts from the menu by
touching the select button�
3Use the scroll button to see the how many errors have occurred in each category�
4� Press the cancel/exit button to return to the previous menu�
Exporting Blender Statistics
Exporting blender statistics (cycle counts, errors, settings and firmware versions)
is a way to save diagnostic information, which Blendtec’s customer service and
repair experts will use if problems arise with your blender�
To export blender statistics to a USB drive, complete the following steps:
1Use a Phillips screwdriver to remove the USB cover at the top of the right side of
the blender�
2� Plug the USB flash drive into the blender’s USB port�
Note: If the blender is in manual or automatic operation mode, the USB
flash drive menu will automatically load on the screen. If the blender is in
programming mode, go to the main menu and select USB Flash Drive.
3� Use the scroll button to find Export Counts, then press the select button� You will
be asked if you want to export counts to the sth-cnts�csv file�
4� Press the select button again to start the export process
5� After the export process is finished, remove the USB drive from the blender and
secure the cover on the USB port with a Phillips screwdriver�
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Blendtec STEALTH 875 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Blendtec STEALTH 875 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Blendtec STEALTH 875

Blendtec STEALTH 875 Gebruiksaanwijzing - English, Français, Espanõl - 156 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info