626843
50
Verklein
Vergroot
Pagina terug
1/156
Pagina verder
48
Error: Touch controller output is invalid
CONNOISSEUR 825
Overtemp Error — This indicates that the motor is overheating� The blender
has been disabled until the unit cools to operating temperatures� If the
blender does not work after 20 minutes or more of cooling time, please
call your Blendtec Service Agent�
Overload Error — This indicates an overload on the motor�
1� Clear the error message by pressing any button or turning the blender off and
on again�
2� Remove the jar, and run the blender to determine whether the issue relates to
the jar or the motor
3� With the jar removed, check for blockage in or around the socket on the motor
base and the blade assembly on the jar
4� Place the jar securely on the motor base, and touch to pulse the blade through
the mixture�
5� Ensure the jar is not loaded with excessively hard or thick ingredients
If overload condition re-occurs, contact your Blendtec service agent�
A “Watchdog Timeout” error indicates a disruption in the normal operation of
the electronic blender controls� This is an uncommon error message, which is
usually caused by incoming power fluctuations or spikes� This error message is
cleared by turning off the blender for 10 seconds (using the switch), then turning
back on� If this error is displayed immediately on start-up, or if it occurs regularly
during normal use contact your Blendtec service center for assistance�
CHEF 775
Overtemp Error — This indicates that the motor is overheating� The blender has been
disabled until the unit cools to operating temperatures� If the icon does not disappear
after 20 minutes or more of cooling time, please call your Blendtec Service Agent�
Touch Error — This indicates that more than one touch sensor on the blender has
been touched� To avoid this message, touch the center of the desired button
If this icon remains on when no one is touching the touch area, unplug and re-plug
in the blender� If the problem persists please contact your Blendtec Service Agent�
Overload Error — This indicates an overload on the motor�
1� Clear the error message by pressing any button or turning the blender off and
on again�
2� Remove the jar, and run the blender to determine whether the issue relates to
the jar or the motor
3� With the jar removed, check for blockage in or around the socket on the motor
base and the blade assembly on the jar
4� Place the jar securely on the motor base, and touch to pulse the blade through
the mixture�
5� Ensure the jar is not loaded with excessively hard or thick ingredients
If overload condition re-occurs, contact your Blendtec service agent�
Reset Errors — If this message appears on the LED information center it indicates
50

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Blendtec CHEF 600 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Blendtec CHEF 600 in de taal/talen: Engels, Frans, Spaans als bijlage per email.

De handleiding is 5.8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Blendtec CHEF 600

Blendtec CHEF 600 Gebruiksaanwijzing - English - 19 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info