EN
7
3. Getting started
3.1 Insert the memory card and SIM card
Turn off the power and remove the back cover and battery. Insert the SIM card according to the
mark on the device. Make sure that the chip contact and the cut edge of the card are aligned in the
correct direction. Slide the card into the slot until it stops. The device handles Nano SIM + Nano SIM
+ microSD cards.
3.2 Switch the device on and off
Press and hold the Power button to turn on the power.
Press and hold the power button and select “Power off” from the Options menu.
3.3 Unlock the device
To unlock the device, you may need the PIN (not the SIM card
PIN), password, pattern drawing, or face unlock.
Unlock the screen:
1. Press the power key to wake up the phone.
2. Place and hold your finger to the lock icon, then pull
down it.
Please, note: the process of unlocking depends on the
pre-configured unlock method.
To set the unlock method:
▪ In the idle screen, touch Settings > Security
▪ Touch Screen lock.
▪ Choose the type of locking as desired. You can set your
screen lock on the basis of Pattern, PIN, Password,
Swipe or None.
▪ If you want to set Face unlock, choose this menu in the Security menu.
▪ Choose another lock method from above as a secondary mode.
