ACR 4250 GB
22
Note:
If the cassette tape does not run properly we
recommend switching over to the other side.
Check the cassette for tape slackness by
rotating the hub. In some cases, rewinding
the tape will alleviate the problem.
Specifications
Amplifier
Output power: 2 x 7 W RMS power
acc. to DIN 45 324/3.1
into 4 Ω
FM waveband
Sensitivity: 1.3 µV at 26 dB
signal-to-noise ratio
Frequency
response: 35 - 15 000 Hz
Tape player
Frequency
response: 40 - 14 000 Hz
Subject to modifications!
Appendix
Mechanism/cassette tapes
To avoid possible problems, you should not
use cassette tapes longer than 60 or 90
minutes (C60/C90). Store your tapes in a
cool place away from dirt, dust and
temperatures exceeding 50° Celsius. Allow
very cold tapes to warm up before playing
them in order to avoid uneven transport.
After approximately 100 hours of use, dust
particles collected on the playback head or
roller may lead to tape run problems and
sound distortions.
Use a head cleaning tape to remove normal
dirt build-up. For tougher cases, use a cotton
swab (Q-Tip) soaked with alcohol. Do not
attempt to clean by inserting a hard object
into the player!
