581267
7
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
7
Warning! Inspect the work site for hidden gas pipes, water
pipes, or electrical wires before making blind or plunge cuts.
Failure to do so may result in explosion, property damage,
electric shock, and/or serious personal injury.
X Clamp the workpiece securely and remove all nails and
metal objects. Holding the work by hand or against your
body leaves it unstable and may lead to loss of control.
X Place the shoe firmly against the work to be cut.
X Let the blade run freely for a few seconds before starting
the cut.
X Whenever possible, work with the shoe (4) pressed
against the workpiece. This will improve tool control and
reduce tool vibration, as well as prevent the blade from
being damaged.
Sawing metal
Be aware that sawing metal takes much more time than
sawing wood.
X Use a saw blade suitable for sawing metal. Use a fine-tooth
saw blade for ferrous metals and a coarser saw blade for
non-ferrous metals.
X When cutting thin sheet metal, clamp a piece of scrap wood
to the back surface of the workpiece and cut through this
sandwich.
X Spread a film of oil along the intended line of cut.
X When cutting metal piping, do not cut directly through
the pipe as you would saw a wooden dowel. Instead, cut
around the circumference of the pipe to avoid pinching
the blade. Only one section of the blade should be in
contact with the pipe.
Pocket cutting - wood only
Pocket cutting is used to cut a hole in a piece of material
without cutting from the side.
X Measure and mark the required pocket cut.
X Fit a saw blade suitable for pocket cutting.
X Rest the shoe (4) on the workpiece in such a position that
the blade forms an appropriate angle for the pocket cut.
X Switch on the tool and slowly feed the blade into the
workpiece. Make sure that the shoe (4) remains in contact
with the workpiece at all times.
Pruning
Warning! Do not use the tool while in a tree, on a ladder or on
any other unstable surface. Be aware of where the branch will
fall.
X Cut downward and away from your body.
X Make the cut close to the main branch or tree body.
Maintenance
Your Black & Decker tool has been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
X Regularly clean the ventilation slots in your tool using a
soft brush or dry cloth.
X Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Never let any liquid get inside the tool and never
immerse any part of the tool into liquid.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
X Safely dispose of the old plug.
X Connect the brown lead to the live terminal in the new
plug.
X Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality
plugs. Recommended fuse: 5 A.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker VPX1301 T1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker VPX1301 T1 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,18 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Black Decker VPX1301 T1

Black Decker VPX1301 T1 Gebruiksaanwijzing - Nederlands, Deutsch, English, Français, Italiano, Português, Espanõl, Dansk, Svenska, Norsk, Suomi - 88 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info