Handleiding Black Decker SC100 T1 (pagina 7 van 74) (Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins)

586426

Verklein

Vergroot

Pagina terug

1/74

Pagina verder

ENGLISH

X When collecting debris be aware of supply cords in the

vicinity. A hazard may occur if the appliance runs over the

supply cord.

Features

1. Handle release button

2. Beater bar

3. Battery compartment cover

4. Motorized dust pan

5. Broom head

6. Dirt cup

Accessories

This product is supplied with the following accessories that

you will find in the dirt cup:

X Wall hook: used to hang the appliance when not in use.

Refer to “Installing the wall hook”.

X Hardware bag: contains the hardware items.

X Batteries: used to power the appliance, follow the

instructions given in the section "Installing the batteries".

Assembly

Warning! Before assembly, switch off the appliance.

X Before first use, remove all components from the packaging

and familiarize yourself with them to help you in the

assembly and operation of your appliance.

X The batteries, hardware bag and wall hook are located in

the dirt cup (6) and must be removed before first use.

X To remove and open the dirt cup (6), follow the instructions

given in the section "Emptying the dirt cup".

Handle assembly (fig. A)

X Insert the end of the bottom handle segment into the

motorised dust pan (4) (fig. A, 1). Make sure that you align

the key (A) in the connector with the keyway (B) in the

receptacle (C). Push the bottom handle section in until the

connector "clicks" in place.

X The middle handle segment can only be assembled one

way in the bottom segment. (fig. A, 2). Make sure that the

shape of the key (D) in the connector matches the shape of

the keyway (E) in the bottom handle segment before

inserting and "clicking" in place.

X Assemble the top handle segment to the middle handle

segment using a similar method (fig. A, 3), (F) & (G).

Installing the batteries (fig. B)

Warning! Use AA size batteries only. Use alkaline batteries

only.

X Take extra care when replacing the batteries as they may

become hot if the appliance is used in the collect mode

(fig. C, 2) for extended periods of time.

Note: Before installing the batteries, make sure that the

handle is locked in place (fig. C, 1).

X Remove the battery compartment cover (3) by pushing the

tab (fig. B, 1) and rotating up as shown in fig. B, 2.

X Insert four new alkaline AA batteries (fig. B, 3) make sure to

match the (+) positive and the (-) negative terminals

correctly. Use alkaline batteries only.

X Install the battery compartment cover (3).

Installing the wall hook

Note: It is highly recommend to hang the appliance on the

provided hook or a similar device to prevent damage to the

broom head (5).

X Firmly attach the provided wall hook to the wall so it will

not pull out. It should be mounted at a minimum height of

54" (137 cm) to its' bottom to ensure the broom head (5)

does not touch the floor (fig. H).

X Use the hardware provided only if hanging on hollow wall

construction. If not, use the appropriate fasteners for the

particular wall material.

Use

Hints for optimum use

Warning! Do not use the appliance without the dirt cup (6) in

place.

Note: The appliance has been designed for sweeping and

collecting dry debris from hard floor surfaces only.

Avoid sweeping-up pieces of string or similar material to

prevent clogging of the appliance rotating parts.

How to operate (fig. C, D and E)

X To change from the sweep mode (fig. C, 1) to the collect

mode (fig. C, 2), push the button (1) in the end of the handle

and rotate the handle towards the broom bristles (fig. C, 3).

X At this point, the beater bar (2) should start turning.

Note: During the collect mode, the beater bar (2) can be

momentarily stopped by pushing the button (1) in the end of

the handle.

X Roll the appliance back and forth over the pile of debris to

collect it into the dirt cup (6). For the best pick-up

performance, the broom head bristles should be facing

away from the dirt pile as shown in fig. D.

X To change back to the sweep mode (fig. C, 1), rotate the

handle back into the slot in the housing (fig. E) until it

latches and you hear a "click" sound. To make it easier to

return the handle to the sweep position, the button (1) in

the end of the handle can be pressed (fig. C, 3). At this point,

the beater bar (2) should stop turning.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Black Decker SC100 T1 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info