709524
9
Verklein
Vergroot
Pagina terug
1/100
Pagina verder
9
ENGLISH
(Original instructions)
u Once chain tension is correct, tighten the locking nut (8) in
the sprocket cover (7).
u Ret the Locking Nut cap (13).
Note: When the chain is new, check the tension frequently
(after disconnecting from the mains) during the rst 2 hours of
use because a new chain stretches slightly.
Extending the pole pruner (g. F)
u Open pole extension release lever (6) (g.F)
u Hold the extension pole with one hand, slide the saw head
away from the release lever.
u When at desired extension, close the release lever.
Warning! Periodically check the connections to ensure that
they are tightened securely.
Adjusting the head angle (g. G)
u Loosen Knob (5), support pole with one hand and rotate
head with other.
u Once in desired position support head and pole whilst
tightening knob (5).
Use
Warning! Let the tool work at its own pace. Do not overload.
Switching on and off (g. H)
For your safety, this tool is equipped with a double switching
system. This system prevents starting the tool inadvertently.
Switching on
u Push the lock-off button (2) using your thumb and at the
same time squeeze the on/off switch with your ngers (1).
u Once the tool is running you can release the lock-off but-
ton (2).
Switching off
u Release the on/off switch (1).
Warning! Never attempt to lock a switch in the on position.
Pruning (g. I)
Before attempting to prune a tree, ensure there are no by-laws
or regulations that would prohibit or control the felling of the
tree.
u Be aware of the direction a branch may fall. Consider all
conditions that may affect the direction of fall, including:
u the length and weight of the branch to be cut
u the intended direction of fall
u any unusual heavy limb structure or decay
u the presence of surrounding trees and obstacles,
including overhead lines, the intertwinement with other
branches and the speed and direction of the wind.
Tree branches are liable to swing towards the tree trunk. In
addition to the user, any bystander, building or object below
the branch is at risk of being struck by the branch.
u Consider access to the tree limb.
u Make sure the tool is running at full speed before making
a cut.
u Hold the tool firmly in place to avoid possible bouncing or
sideways movement of the tool.
u Guide the tool through the branch using light pressure.
When cutting heavy branches, where a partial cut may
splinter and damage the tree, proceed as follows:
u Make the first cut 15 cm from the tree trunk on the
underside of the limb. Use the top of the guide bar (9)
to make this cut.
u Cut one third through the diameter of the limb. Then cut
down from the top.
Cleaning, maintenance and storage
Your BLACK+DECKER corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
u Switch off and unplug the appliance/tool.
u Or switch off and remove the battery from the appliance/
tool if the appliance/tool has a separate battery pack.
u Or run the battery down completely if it is integral and then
switch off.
Regularly clean the ventilation slots in your appliance/tool/
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do not
use any abrasive or solvent-based cleaner.
After use and before storage
u Regularly clean the ventilation slots with a clean, dry paint
brush.
u To clean the appliance/tool/charger, use only mild soap
and a damp cloth. Never let any liquid get inside and
never immerse any part into liquid.
u Remove debris using a hard brush.
u Lubricate the chain with oil.
Checking and adjusting the chain tension (fig. E)
u Check the saw chain tension. The tension is correct when
the saw chain (10) snaps back after being pulled away 3
mm from the saw chain bar with light force from the middle
nger and thumb. There should be no ‘sag’ between the
guide bar (9) and the saw chain (10) on the underside.
To adjust the tension:
u Loosen the Locking nut (8).
u Turn the screw (16) clockwise.
Warning! Do not over-tension the chain as this will lead to
excessive wear and will reduce the life of the bar and chain.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker PS7525 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker PS7525 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,99 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info