531203
26
Verklein
Vergroot
Pagina terug
1/80
Pagina verder
26
ENGLISH
placed on the
stands (4). Always
point your
heatgun away
from you. Secure
the cable to
prevent pulling
your heatgun off
the stand. Do not
touch the nozzle
and ensure that
nothing is
dropped into the
nozzle. Carefully switch off your heatgun and then
allow it to cool (see cooling down procedure).
FITTING THE SCRAPER (KX1682, KX1683)
Ensure your heatgun is cool.
Align the slot of
the scraper blade
with the
protrusion on the
blade holder and
position under the
retaining screw.
Note: Ensure the hole in the scraper is to the left of the
screw in the blade holder.
Tighten the
retaining screw.
Place the blade
holder over the
nozzle outlet.
Ensure it is
aligned. The small
bump on the
inside of the blade
holder engages with the recess on the nozzle. Tighten
the blade holder clamp screw.
PAINT STRIPPING
When stripping a
point next to
glass, it is
necessary to
protect the glass
from the heat.
A Black & Decker
glass protector
nozzle is used for
this purpose (available as an accessory). Your heatgun
is not suitable for stripping metal framed windows.
This is because the heat from the heatgun is
conducted through the metal and can crack the glass.
Scrape with the grain of the wood wherever possible.
Do not linger on one spot for too long as the surface
may char or ignite.
KX1682, KX1683 only:
Your heatgun is designed for use with the scraper
blade to strip paint.
Proceed as follows:
Ensure the nozzle
is cool and fit the
scraper blade.
Hold your heatgun
with the scraper
blade in contact
with the surface
at an angle of 30-40˚.
When the paint softens, scrape firmly. Experiment to
establish the length of time necessary to apply the heat
to obtain optimum results. Scrape the softened paint
immediately or it will harden again.
Take care to prevent paint and debris collecting on the
scraper because it may ignite. Carefully clean the
scraper blade with a knife should any build up occur.
When scraping vertical surfaces, scrape downwards
to prevent debris falling into the nozzle.
Note: When stripping a point next to glass, use a glass
protector nozzle instead of the scraper blade - a
manual scraper is needed to scrape off the paint.
CD700, KX1600 only:
Your heatgun is designed to soften paint and laquer
enabling it to be removed using a good quality
hand scraper.
Proceed as follows:
Direct the hot air onto the area to be removed. When
the paint softens, scrape firmly. Experiment to establish
the length of time necessary to apply the heat to obtain
optimum results. Scrape the softened paint
immediately or it will harden again.
OTHER USES FOR YOUR HEATGUN
On low heat (KX1682, KX1683):
Drying paint and varnish.
Removing stickers and decorations.
Waxing and dewaxing (eg. skis).
Drying wet timber prior to filling.
Shrinking PVC wrapping and insulation tubes.
Thawing frozen pipes.
1
2
30-40°
CD700 KX1600-1683 ML p22-39 07/01/2000, 3:39 pm26
26

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker KX1682 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker KX1682 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Spaans, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,47 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info