497061
9
Verklein
Vergroot
Pagina terug
1/88
Pagina verder
9
ENGLISH
When assessing vibration exposure to determine safety
measures required by 2002/44/EC to protect persons regularly
using power tools in employment, an estimation of vibration
exposure should consider, the actual conditions of use and the
way the tool is used, including taking account of all parts of
the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to the
trigger time.
Labels on tool
The following pictograms are shown on the tool:
:
Warning! To reduce the risk of injury, the user must
read the instruction manual.
Electrical safety
#
This tool is double insulated; therefore no earth wire
is required. Always check that the power supply
corresponds to the voltage on the rating plate.
u If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised Black & Decker Service
Centre in order to avoid a hazard.
Features
1. On/off switch
2. Lock-off button
3. Variable speed control knob
4. Plunge lock lever
5. Spindle lock button
6. Collet
7. Revolver depth stop
8. Chip deector
9. Depth stop bar
10. Depth of cut scale
11. Dust extraction adaptor
Assembly
Warning! Before assembly, make sure that the tool is
switched off and unplugged.
Fittingarouterbit(g.A)
u Remove the chip deector (8).
u Keep the spindle lock button (5) depressed and rotate the
spindle until the spindle lock fully engages.
u Loosen the collet nut (12) using the spanner provided.
u Insert the shank of the router bit (13) into the collet (6).
Make sure that the shank protrudes at least 3 mm from
the collet as shown.
u Keep the spindle lock button (5) depressed and tighten the
collet nut (12) using the spanner provided.
Fittingtheedgeguide(g.B)
The edge guide helps to guide the tool parallel to an edge.
u Fit the bars (14) to the edge guide (15) using the two
screws (16) provided.
u Insert the bars (14) into the router base as shown.
u Set the edge guide to the required distance.
u Tighten the xing screws (17).
Fittingthedustextractionadaptor(g.C)
The dust extraction adaptor allows you to connect a vacuum
cleaner to the tool.
u Connect the hose (18) of the vacuum cleaner to the
adaptor (11).
Fittingthetemplateguide(g.D)
u Fit the template guide (19) to the base of the router,
with the ange to the bottom (workpiece) side.
u Insert the two long screws (20) from the bottom side
through the template guide and the holes in the base.
u Place a nut onto each of the screws and securely tighten
the nuts.
Fittingthedistancepiece(g.E)
u Fit the distance piece (21) to the base of the router using
the screws provided.
Fittingthecentringpin(g.F)
u Fit the edge guide to the router as shown in g. B, but
upside down.
u Fit the centring pin (22) to the workpiece side of the edge
guide with the screw (23) provided.
Fittingthecopyfollower(g.G)
u Fit the edge guide to the router as shown in g. B.
u Fit the ‘L' bar (24) to the upper side of the edge guide
using the two screws and nuts provided.
u Adjust the rotating attachment (25) on the ‘L' bar with the
wing knob (26).
Use
Warning! Let the tool work at its own pace. Do not overload.
u Carefully guide the cable in order to avoid accidentally
cutting it.
Adjustingthedepthofcut(g.H,I&J)
The depth of cut is the distance X between the depth stop bar
(9) and the depth stop (27). The depth of cut can be set in two
different ways as described below.
Adjustingthedepthofcutusingthescale(g.I)
u Fit the router bit as described above.
u Loosen the locking screw (28).
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker KW900E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker KW900E in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,98 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info