580993
8
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
8
that the saw blade has stopped. Used saw blades may be
hot.
Fitting the saw blade (fig. B)
XHold the saw blade (10) as shown, with the teeth facing
forward.
XPush and hold the blade clamp (9) down.
XInsert the shank of the saw blade into the blade holder
(11) as far as it will go.
XRelease the blade clamp (9).
Saw blade storage (fig. C)
Saw blades (10) can be stored in the storage compartment
located on the side of the tool.
XOpen the cover (3) of the saw blade storage
compartment by holding the tab on the top of the cover
(3) and pulling it outward.
XThe blades are retained in the compartment by a
magnetic strip. To remove a blade, press down on one
end of the blade to raise the other end, and remove.
XClose the cover (3) of the saw blade storage
compartment and make sure that it is latched closed.
Warning! Close the compartment door securely before
operating the saw.
Connecting a vacuum cleaner to the tool (fig. D)
An adaptor is required to connect a vacuum cleaner or dust
extractor to the tool. The dust extraction adaptor (6) can be
purchased from your local Black & Decker retailer.
XPush the adaptor (6) into the dust extraction outlet (5).
XConnect the vacuum cleaner hose to the adaptor (6).
Use
Adjusting the shoe plate for bevel cuts (fig. E and F)
Warning! Never use the tool when the shoe plate is loose or
removed.
The shoe plate (7) can be set to a left or right bevel angle of
up to 45°.
XPull the shoe plate locking lever (4) outwards to unlock
the shoe plate (7) from the 0 degree position (fig. F).
XPull the shoe plate (7) forward and set the required
bevel 15°, 30° and 45° indicated in the bevel angle
window.
XPush the shoe plate locking lever (4) back towards the
saw to lock the shoe plate (7).
To reset the shoe plate (7) for straight cuts:
XPull the shoe plate locking lever (4) outwards to unlock
the shoe plate (7).
XSet the shoe plate (7) to an angle of 0° and push the
shoe plate backwards.
XPush the shoe plate locking lever (4) back towards the
saw to lock the shoe plate (7).
Switching on and off
XTo switch the tool on, press the variable speed on/off
switch (2).
XTo switch the tool off, release the variable speed on/off
switch (2).
XFor continuous operation, press the lock-on button (1)
and release the on/off switch (2).
XTo switch the tool off when in continuous operation,
press the on/off switch (2) and release it.
Sawing
Hold the tool firmly with both hands while cutting.
The shoe plate (7) should be held firmly against the material
being cut. This will help prevent the saw from jumping,
reduce vibration and minimise blade breakage.
XLet the blade run freely for a few seconds before starting
the cut.
XApply only a gentle pressure to the tool while performing
the cut.
Operating the laser (fig. G - I) (‘L’ units only)
Installing the batteries (fig. G)
Detach the laser module (13) from the jigsaw by removing
the screw (12) and pulling the laser module forward. Insert
two new 1.5 Volt AAA alkaline batteries, making sure to
match the (+) and (-) terminals correctly. Re-attach the laser
module (13).
Adjusting the laser side-to-side (fig. H)
Note: The laser is intended as a cutting aid and does not
guarantee a precise cut.
Warning! Do not adjust the laser with the jigsaw plugged in.
XUse the laser adjustment screw (14) to align the laser
line with the saw blade if needed.
The laser visibility (power) will be reduced if the jigsaw is
overheated. The laser may not be visible when the saw is
overloaded for a prolonged period of time. The laser visibility
will gradually return to normal when the tool cools down even
when the tool is unplugged.
Warning! Do not leave the overheated laser switched ON.
Make sure that the switch is in the OFF position and remove
the batteries to remove power from the laser.
Using the laser (fig. I and J)
The laser projects the line of cut (17) on to the surface of the
workpiece.
XTo switch the laser on, press the button (15).
XTo switch the laser off, press the button (15) again.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker KS800EL T1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker KS800EL T1 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Black Decker KS800EL T1

Black Decker KS800EL T1 Gebruiksaanwijzing - Nederlands, Deutsch, English, Français, Italiano, Português, Espanõl - 88 pagina's

Black Decker KS800EL T1 Gebruiksaanwijzing - Polski - 16 pagina's

Black Decker KS800EL T1 Gebruiksaanwijzing - Dansk, Svenska, Norsk, Suomi - 88 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info