580888
8
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
8
ENGLISH
Insert the shank of the saw blade (7) into the
blade holder (9) as far as it will go.
Slightly tighten the two screws (10) alternately
to position the blade, then fully tighten the two
screws (10).
Adjust the saw blade support roller (5) as
described above.
To remove the saw blade (7), turn both screws
(10) one turn counter-clockwise.
Connecting a vacuum cleaner to the tool
(fi g. D)
An adaptor (11) is required to connect a vacuum
cleaner or dust extractor to the tool. The adaptor
can be purchased from your local Black & Decker
retailer.
Push the adaptor (11) into the dust extraction
outlet (3).
Connect the vacuum cleaner hose (12) to the
adaptor (11).
Saw blade storage (KS602E & KS603E only)
(fi g. E)
Saw blades (7) can be stored in the storage
compartment (6) located on the side of the tool
Open the cover of the saw blade storage
compartment (6) by holding the tab on the top
of the door and pulling outwards.
Remove or store saw blades (7) in the storage
compartment (6).
Close the cover of the saw blade storage
compartment (6) and make sure that it is
latched closed.
Cut line blower (fi g. F)
To aid visibility when cutting, your jigsaw is
equipped with a cut line blower (13) which will
keep the work area clear of dust as you saw.
Use
Adjusting the shoe plate for bevel cuts (fi g.
G)
The shoe plate can be set to make either a straight
cut or a left or right bevel cut at an angle of 45°.
Loosen the screws (8).
Pull the shoe plate (4) forward, rotate the shoe
plate (4) to the left or right and push it back into
the 45° location.
Push the blade support roller (5) forward until it
touches the saw blade (7).
Tighten the screws (8).
To reset the shoe plate for straight cuts:
Loosen the screws (8).
Pull the shoe plate (4) forward, rotate to the
centre and push it back into the 0° location.
Push the blade support roller (5) forward until it
touches the saw blade (7).
Tighten the screws (8).
Variable speed control
The tool has a variable speed on/off switch (1).
The operating speed depends on how far you
press the switch.
Use a high speed for wood, medium speed for
aluminium and PVC and low speed for metals
other than aluminium.
Switching on and off
To switch the tool on, press the on/off switch
(1).
To switch the tool off, release the on/off switch
(1).
For continuous operation, press the lock-on
button (2) and release the on/off switch (1).
To switch the tool off when in continuous
operation, press and release the on/off switch
(1).
Hints for optimum use
Hold the tool fi rmly with both hands while
cutting.
The shoe should be held fi rmly against the
material being cut. This will help prevent
the saw from jumping, reduce vibration and
minimise blade breakage.
Let the blade run freely for a few seconds
before starting the cut.
Apply only a gentle pressure to the tool while
performing the cut.
Sawing laminates
When cutting laminates splintering may occur
which can damage the presentation surface. The
most common saw blades cut on the upward
stroke, therefore if the shoe plate is sitting on the
presentation surface either use a saw blade that
cuts on the downward stroke or:
Use a fi ne-tooth saw blade.
Saw from the back surface of the workpiece.
Clamp a piece of scrap wood or hardboard
to both sides of the workpiece to minimise
splintering, and saw through this sandwich.
Sawing metal
Be aware that sawing metal takes much more
time than sawing wood.
Use a saw blade suitable for sawing metal.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker KS603E T1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker KS603E T1 in de taal/talen: Pools, Turks als bijlage per email.

De handleiding is 1,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Black Decker KS603E T1

Black Decker KS603E T1 Gebruiksaanwijzing - Nederlands, Deutsch, English, Français, Italiano, Português, Espanõl, Dansk, Svenska, Norsk, Suomi - 76 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info