472998
28
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
28
ENGLISH
TECHNICAL DATA
The level of sound pressure of the tool is in accordance
with EEC legislation. It is recommended that you take
appropriate measures for the protection of your hearing
if the sound level seems uncomfortable. This normally
equates to a sound pressure in excess of 85dB (A).
Note: This user manual also covers catalogue numbers
ending with a letter suffix. Refer to your carton for
details of your product.
FEATURES
1. Forward/reverse and lock-off switch
2. Variable speed trigger switch
3. Battery pack
4. 3-5 hour charger
5. 1 hour fast charger
6. Keyless chuck
7. Torque adjustment collar
8. Gear ratio selector
9. Screwdriver bit
The forward/reverse and
lock-off switch controls
the direction of rotation
of the chuck. In the
centre position, it
prevents starting of your
drill when changing
accessories or during
storage.
The variable speed trigger switch is used to operate
your drill in all modes of operation. It also controls
the speed of your drill.
The torque adjustment collar sets the torque loading
when screwdriving.
The gear ratio selector enables the setting of the best
speed for screwdriving, or the best speed for drilling.
Your drill is supplied with a double function
screwdriver bit. To remove, pull firmly from the recess.
To replace, push firmly until it clicks into place.
VARIABLE SPEED
Your drill has a variable
speed trigger switch.
The more the trigger
switch is depressed, the
higher the speed of your
drill. If your drill has a
gear ratio selector, the
change in speed is controlled continuously using the
trigger switch or in two stages using the gear ratio
selector. The maximum speed achieved using the
trigger switch depends on the gear ratio selector setting.
BRAKE
The brake switch stops the rotation of the chuck in less
than 1 second. This feature is useful when adjusting
the seating of screws, and for driving quickly a large
number of screws.
GEAR RATIO SELECTOR
To change the setting of the gear ratio selector,
proceed as follows:
To select the low speed
setting (screwdriving
and high torque
applications), slide the
selector switch to the
front position. The
number ‘1’ appears.
To select the high speed
setting (drilling and hammer drilling), slide the selector
switch to the rear position. The number ‘2’ appears. If
necessary, when changing the gear ratio, depress the
trigger switch sufficiently to rotate the chuck slowly.
Warning! Do not change gear when the chuck is
rotating at other than low speed.
TORQUE ADJUSTMENT COLLAR
To select non-masonry drilling, rotate the collar until
the drill symbol is in line with the indicator on the top of
your drill housing.
2
3
4
5
1
2
1
2
3
4
5
9
8
7
6
2
3
5
1
4
1
2
3
4
5
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker KC9652 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker KC9652 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 3,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info