578194
7
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
7
Labels on tool
The following pictograms are shown on the tool:
:
Warning! To reduce the risk of injury, the user must
read the instruction manual.
Electrical safety
#
This tool is double insulated; therefore no earth wire
is required. Always check that the power supply
corresponds to the voltage on the rating plate.
u If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised Black & Decker Service
Centre in order to avoid a hazard.
Features
1. On/off switch
2. Lock-on button
3. Adjustable handle
4. Tension lever
5. Retractable hood
6. Centring knob
7. Dust extraction outlet
Assembly
Warning! Before assembly, make sure that the tool is
switched off and unplugged.
Fitting a sanding belt (g. A)
Warning! Never use the tool without a sanding belt.
u Pull the tension lever (4) outward to release the tension on
the sanding belt (8).
u Remove the old sanding belt.
u Place a new sanding belt over the rollers. Ensure that the
arrow on the sanding belt points in the same direction as
the arrow on the tool.
u Push the tension lever (4) inward to tension the sanding belt.
Adjusting the sanding belt tracking (g. B)
To ensure a correct tracking, the sanding belt must be centred
over the rollers.
u Switch on the tool while holding it upside down.
u Turn the centring knob (6) as required until the tracking of
the belt is centred over the rollers.
Adjusting the handle (g. C)
The handle is adjustable to 3 positions.
u Unlock the handle (3) by pulling the locking handle (9)
outward.
u Adjust the handle in the desired position.
u Lock the handle by pushing the locking handle inward.
Retracting the hood (g. D)
The hood can be retracted for sanding in conned spaces.
Warning! The hood can only be retracted when the adjustable
handle is in the up position.
u Adjust the handle (3) in the straight-up position.
u Lift the hood (5) up.
u To close the hood, pull the tab (10) sideways rst.
Fitting and removing the dust cassette (g. E)
u Slide the dust cassette (11) over the dust extraction outlet (7).
u To remove the dust cassette, slide it off the outlet.
Connecting a vacuum cleaner (g. F)
u Slide the adaptor (12) over the dust extraction outlet (7).
u Connect the hose of the vacuum cleaner to the adaptor.
Use
Warning! Let the tool work at its own pace. Do not overload.
Switching on and off
u To switch the tool on, press the on/off switch (1).
u For continuous operation, press the lock-on button (2) and
release the on/off switch.
u To switch the tool off, release the on/off switch. To switch
the tool off when in continuous operation, press the on/off
switch once more and release it.
Emptying the dust cassette (g. E & G)
The dust cassette should be emptied every 10 minutes of use.
u Remove the dust cassette (11) to the rear and off the tool.
u Remove the cover (13) by twisting it clockwise.
u Hold dust cassette with the lter (14) facing down and
shake the cassette to empty the contents. Shake the
cover to empty the contents.
u Ret the cover (13) onto the dust cassette, twisting it
counterclockwise until it locks into place.
u Ret the dust cassette onto the tool.
Cleaning the dust cassette lter
The dust cassette lter is re-usable and should be cleaned
regularly.
u Empty the dust cassette (11) as described above.
u Pull the lter (14) off the dust cassette.
Warning! Do not twist the lter.
u Shake off excess dust by tapping the lter into a dustbin.
Warning! Do not brush or use compressed air or sharp
objects to clean the lter. Do not wash the lter.
u Replace the lter.
u Ret the cover.
u Ret the dust cassette onto the tool.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker KA88 T2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker KA88 T2 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,99 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Black Decker KA88 T2

Black Decker KA88 T2 Gebruiksaanwijzing - Nederlands, Deutsch, English, Français, Italiano, Português, Espanôl, Espanõl - 76 pagina's

Black Decker KA88 T2 Gebruiksaanwijzing - Polski - 16 pagina's

Black Decker KA88 T2 Gebruiksaanwijzing - Polski - 76 pagina's

Black Decker KA88 T2 Gebruiksaanwijzing - Türkiye - 12 pagina's

Black Decker KA88 T2 Gebruiksaanwijzing - Türkiye, Dansk, Svenska, Norsk, Suomi - 76 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info