44141
10
Verklein
Vergroot
Pagina terug
1/69
Pagina verder
7
We recommend that the steel blade is
sharpened or a new blade fitted at the
beginning of the season.
Replacement blades A6157 are available from
Black & Decker dealers and service centres.
!
Warning! When fitting a new blade use only
the Black & Decker replacement part
specified for your machine - do not attempt
to fit any other blade.
Fitting new blade (Fig. G)
Observe all the relevant warnings before
changing the blade.
Warning! Remove safety key before
changing the blade.
G1
Turn your machine over on its side so
that the underside of the cutter deck is
exposed.
Wear gloves to protect hands.
Using a cloth placed over the blade or
heavy duty gloves to protect your hands,
grip the blade and, using the spanner
provided, loosen and remove the nut
from the motor spindle. Turn the nut in an
anti-clockwise direction to loosen it.
G2
Remove nut (23), square washer (22),
clutch plate (21) and blade.
To replace blade ensure the cutting
edges of the blade are closest to the
ground and place blade onto the
combined mount.
G3
Place the clutch plate over the shoulder
of the combined mount protruding
through the blade. Ensure to align the
inside edges with the outside edges of
the blade.
G4
Place the square steel blade spacer on
the motor shaft aligning the inside flats
with the shaft and engaging the outside
edges with the plastic clutch plate.
Engage nut on shaft and turn it
clockwise to tighten.
Ensure that removed parts are replaced
correctly before use, incorrect assembly
may result in damage to your mower
and reduced cutting performance.
Note: This unit is fitted with a clutch plate
(24), between the blade nut and the blade,
which must be assembled correctly at all
times. Damaged blade assembly parts must
be replaced before use.
Overload protection
Your machine is fitted with overload protection.
If you work too quickly in long grass, or in heavy
cutting conditions, you may overload the motor.
This will be indicated by a significant drop in speed,
and eventually, the overload protection will operate.
This is not a fault but a safety device to protect
your machine.
When this occurs, remove the safety key and wait for
1 to 2 minutes to allow to cool, clear any blockage
ensuring the blade is free to rotate. To restart,
replace the safety key and operate the switch lever.
If the cut-out operates again within 10 minutes, you
should increase the height of cut (see “Height of
cut adjustment”).
Severe overloading may result in a longer delay on
restarting. In such cases, after resetting, you should
allow the motor to cool.
To obtain the best results:
Cut the grass regularly.
Do not cut wet grass.
When the grass is longer than 10cm (4 inches),
it is advisable to go over the lawn on a high cut
setting and then finish using a lower setting.
Care and maintenance
The advice given in this section covers the general
care and maintenance of the main body of your
mower. Advice relating to the blades is given in
“Maintenance of blades”. Advice relating to the
maintenance and storage of the battery is given in
“Battery information”.
Always keep your machine clean and free from
grass cuttings, especially the underside of the
cutter deck and the air vents.
At the end of each cutting session we
recommend that the build up of grass on the
underside of the cutter cover is removed using a
blunt scraper, the spanner included with this
mower may be used for this purpose.
Clean all plastic components with a damp cloth.
Caution! Do not use solvents or cleaning fluids
as these may damage the plastic components of
your mower.
ENGLISH
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker GRC730 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker GRC730 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Spaans als bijlage per email.

De handleiding is 0,99 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info