527606
12
Verklein
Vergroot
Pagina terug
1/80
Pagina verder
12
ENGLISH
Setting the tool to trimming or edging mode
(fig. D, E & F)
The tool can be used in trimming mode as shown
in fig. D or in edging mode to trim overhanging
grass along lawn edges and flower beds as shown
in fig. E.
Trimming mode (fig. D & F)
For trimming, the trimmer head should be in the
position shown in fig. D. If it is not:
Turn the locking ring (7) counterclockwise.
Rotate the trimmer body counterclockwise
until the trimmer head engages in the
trimming position.
Tighten the locking ring by turning it clockwise.
Edging mode (fig. E & F)
For edging, the trimmer head should be in the
position shown in fig. E. If it is not:
Turn the locking ring (7) counterclockwise.
Rotate the trimmer body clockwise until the
trimmer head engages in the edging position.
Tighten the locking ring by turning it clockwise.
GL670/GL670P - Adjusting the position of the
secondary handle (fig. A & G)
The secondary handle can be adjusted to provide
optimum balance and comfort.
Let the guard (11) rest on the ground.
While keeping the handle button (6) depressed,
move the handle (5) into the desired position.
Release the handle button.
GL660/GL660P/GL670/GL670P -
Adjusting the height of the tool (fig. A & H)
This tool has a telescopic body, allowing you to
set it to a comfortable height.
Let the guard (11) rest on the ground.
Turn the locking ring (7) counterclockwise.
Move the switch handle up or down to the
desired height.
Tighten the locking ring by turning it clockwise.
GL670/GL670P -
Adjusting the trimmer head angle (fig. I)
The adjustable trimmer head angle allows you to
set the optimum trimming angle regardless of
your length.
It also allows you to trim under benches and
shrubs.
Let the guard (11) rest on the ground.
Keeping the pedal (10) depressed with your
foot, move the switch handle up or down as
required.
Release the pedal.
Switching on and off (fig. A)
To switch the tool on, push the on/off switch (1).
To switch the tool off, release the the on/off
switch.
Never attempt to lock a switch in the on
position.
Hints for optimum use
Trimming
Hold the tool as shown in fig. D.
Gently swing the trimmer from side to side as
shown in fig. D.
When cutting long grass, work in stages from
the top. Take small cuts.
Keep the tool away from hard objects and
delicate plants.
If the tool starts running slowly, reduce the load.
Edging
Optimum cutting results are achieved on edges
deeper than 50 mm.
Do not use the tool to create edges. To create
edges, use an edging spade.
Guide the tool as shown in fig. E. Keep the
edge guide against the lawn edge.
To make a closer cut, slightly tilt the tool.
General
In order to achieve optimum cutting results,
only cut dry grass.
GL660P/GL670P - Using the plant protector (fig. J)
The plant protector will help you to protect plants
while trimming along lawn edges.
In trimming mode, set the plant protector to
position A.
In edging mode, set the plant protector to
position B or C.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker GL670P bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker GL670P in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 2,18 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info