583274
6
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
6
ENGLISH
Gently pull out the tube (14) until the adjustment button
(6) locks into place.
When the button locks into place, the tool is set to the
shortest working position.
Warning! Never use the tool unless it is in a working position.
Fitting the edge guide (fig. D)
Position the edge guide (13) in front of the tool as shown.
Gently pull apart the edge guide legs.
Slide the legs over the motor housing (8) into the holes
(16) on either side.
Make sure the edge guide fits properly into the motor
housing guides.
Use
Warning! Let the tool work at its own pace. Do not overload.
Setting the tool to trimming or edging mode
(fig. C, E & F)
The tool can be used in trimming mode as shown in fig. E or
in edging mode to trim overhanging grass along lawn edges
and flower beds as shown in fig. F.
Trimming mode (fig. C & E)
For trimming, the trimmer head should be in the position
shown in fig. E. If it is not:
Set the tool to the working position.
Depress the adjustment button (6).
Rotate the handle (2), while releasing the button.
When the head is in position, the button will lock into place.
Note: The head will only rotate in one direction.
Edging mode (fig. C & F)
For edging, the trimmer head should be in the position shown
in fig. F. If it is not:
Set the tool to the working position.
Depress the adjustment button (6).
Rotate the handle (2), while releasing the button.
When the head is in position, the button will lock into place.
Note: The head will only rotate in one direction.
Adjusting the height of the tool (fig. C)
This tool has a telescopic mechanism, allowing you to set it to
a comfortable height. There are three height settings.
To adjust the height setting, proceed as follows:
Depress the adjustment button (6).
Gently pull the tube (14) in or out of the motor housing (2)
to the desired height, while releasing the button.
When the tube is in position, the button will lock into place.
Switching on and off
To switch the tool on, squeeze the trigger lever (1).
To switch the tool off, release the trigger lever.
Warning! Never attempt to lock the trigger lever in the on
position.
Hints for optimum use
General
In order to achieve optimum cutting results, only cut dry
grass.
Trimming
Hold the tool as shown in fig. E.
Gently swing the trimmer from side to side.
When cutting long grass, work in stages from the top.
Take small cuts.
Keep the tool away from hard objects and delicate plants.
If the tool starts running slowly, reduce the load.
Edging
Optimum cutting results are achieved on edges deeper than
50 mm.
Do not use the tool to create edges. To create edges,
use an edging spade.
Guide the tool as shown in fig. F.
To make a closer cut, slightly tilt the tool.
Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance, switch off and
unplug the tool.
Regularly clean the ventilation slots in your tool using
a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Regularly clean the cutting line and spool using a soft
brush or dry cloth.
Regularly use a blunt scraper to remove grass and dirt
from the underneath of the guard.
Fitting a new spool of cutting line (fig. G & H)
Replacement spools of cutting line are available from your
Black & Decker dealer (cat. no. A6441). Complete cassettes
containing a spool of cutting line are also available
(cat. no. A6442).
Unplug the tool.
Keep the tabs (17) depressed and remove the spool cover
(18) from the housing (11) (fig. G).
Remove the empty spool (19) from the spool cover.
Remove any dirt and grass from the spool cover and
housing.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker GL651SB T1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker GL651SB T1 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Black Decker GL651SB T1

Black Decker GL651SB T1 Gebruiksaanwijzing - Polski - 12 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info