584951
10
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
10
ENGLISH
To ensure continued safe operation,
check the chain tension as described
in this manual after every 10 minutes
of use, and adjust back to a clearance
of 3 mm as required.
Double insulation
Your chainsaw is double insulated.
This means that all external metal parts are
electrically isolated from the power supply.
This is achieved by placing an extra insulation
barrier between the electrical and mechanical
parts. Double insulation means greater
electrical safety and obviates the necessity
of having the machine earthed.
Electrical safety
Make sure your chainsaw is correct for your
supply. The voltage can be found on the rating
plate.
Fuse replacement (UK & Ireland only)
If you need to replace the fuse on your extension
cable, please note the following:
The plug should be fitted with a 13 amp fuse
which is the recommended fuse for your chainsaw.
Only use replacement fuses which are
approved to BS1362.
When changing the fuse in your plug, always
ensure the fuse cover is refitted.
If the fuse cover is missing or damaged do not
use the plug. Note: Fuses do not give personal
protection against electric shock.
Plug replacement (UK & Ireland only)
We strongly recommend the use of PVC or rubber
covered plugs or connectors with your chainsaw.
Disconnect the plug from the supply.
Cut off the plug and dispose of it immediately.
Insertion of a detached plug into a 13 amp
socket outlet may result in electric shock.
Only fit BS1363A approved plugs fitted with
the correctly rated fuse (1).
The cable wire colours, or a letter, will be
marked at the connection points of most good
quality plugs. Attach the wires to their
respective points in the plug. Brown is for
“Live” (L) (2) and blue is for “Neutral” (N) (4).
Before replacing the top cover of the mains
plug ensure that the cable restraint (3) is
holding the outer sheath on the cable firmly
and that the two leads are correctly fixed at the
terminal screws.
Warning! Never connect live or neutral
wires to the earth pin marked “E” or .
Note: Do not wire an extension cable
directly into your chainsaw.
Increased safety can be obtained by having a
qualified electrician install a high sensitivity
(30 mA / 30mS) circuit breaker in the house wiring.
If you do not wish to have one installed, then we
strongly recommend that the electrical power to
your chainsaw be supplied through a high
sensitivity residual current device (RCD). The RCD
is designed to provide a high degree of personal
protection against harmful electric current should
fault conditions occur.
Warning! The use of an RCD or other
circuit breaker unit does not release the
operator of your chainsaw from the safety
instructions and safe working practices
given in this user manual.
We recommend that if your mains cable is cut or
requires replacement that you return your chainsaw
to a Black & Decker service agent. When repaired,
your chainsaw will be tested for electrical safety.
Cable connection system (UK only)
Black & Decker continually makes every effort to
achieve the highest standards in performance,
quality and reliability. We recommend the use of a
new outdoor cable connection system, which
gives additional protection against the possibility
of water or moisture entering into the cable
connector during normal use.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker GK1640 T4 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker GK1640 T4 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Black Decker GK1640 T4

Black Decker GK1640 T4 Gebruiksaanwijzing - Nederlands, Deutsch, English, Français, Italiano, Português, Espanôl, Espanõl, Dansk, Svenska, Norsk, Suomi - 128 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info