Handleiding Black Decker FSMH1621S T1 (pagina 6 van 76) (Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins)

586643

Verklein

Vergroot

Pagina terug

1/76

Pagina verder

ENGLISH

(Original instructions)

Note: Ensure the ller cap is rmly secured.

Note: Do not use chemical cleaners with your steam mop..

Attaching the carpet glider (Fig. G) (For use on

carpets only)

u Place carpet glider on the oor.

u Attach a cleaning pad to the unit.

u Lightly press the steam mop down onto the carpet glider

(14) until it clicks into place.

Caution! Always place your steam mop with the handle (10)

in the upright position when stationary and make sure the

steam mop is turned off when not in use.

Removing the carpet glider (Fig. G)

Caution! Always wear suitable shoes when changing the

carpet glider on your steam mop. Do not wear slippers or

open toed footwear.

u Return the handle (10) to the upright position and turn the

steam mop ‘OFF’.

u Wait until the steam mop cools down. (approximately ve

minutes)

u Place the front of your shoe onto the carpet glider removal

tab (22) and press down rmly.

u Lift the steam mop up off the carpet glider (14).

Caution! Always place your steam mop with the handle (10)

in the upright position when stationary and make sure the

steam mop is turned off when not in use.

Fitting a scent pack (Fig. I & J)

Warning! Return the handle (10) to the upright position and

turn the steam mop ‘OFF’. Wait until the steam mop cools

down. (approximately ve minutes).

u Slide the door release button (26), the door will open.

u Place the scent pack into the cavity (27).

u Close the door (28) py pushing it rmly down.

Attaching the hose and accessories to the Hand

held steam cleaner (Fig. K & L)

Warning! Inspect the seal (26) on the steam nozzle (4) and

hose (27) before each use. If the seal is missing or damaged

then please contact your nearest authorised repair agent. Do

not use the appliance.

Attaching the hose (Fig. K)

u Press in the clips (28) on either side of the hose (27).

u Press the hose (27) onto the steam nozzle (4) and release

the clips (28).

Important! Ensure that the hose (27) is securely fastened

before using the hand held steam cleaner. If steam escapes

from the joint then the hose is not correctly t, allow the unit to

cool then remove and re-t the hose.

Attaching the variable steam jet nozzle (Fig. L)

u Press in the clips (30) on either side of the variable steam

jet nozzle (31).

u Press the variable steam jet nozzle onto the steam nozzle

(4) or the hose (27) and release the clips (30).

Important! Ensure that the variable steam jet nozzle (31) is

securely fastened before using the hand held steam cleaner.

If steam escapes from the joint then the variable steam jet

nozzle is not correctly t, allow the unit to cool then remove

and re-t the variable steam jet nozzle.

Attaching other accessories (Fig. J)

u Align the lugs on the hose with the recesses on the acces-

sory.

u Press the accessory (29) onto the hose (27) and twist

anti-clockwise until the accessory clicks into place.

Note! The variable steam jet nozzle may be used without the

hose by tting them directly to steam nozzle. All other acces-

sories must be connected to the hose for use.

Removing the hose and accessories(Fig. K & L)

Warning! The Steam nozzle, variable steam jet nozzle, hose

and accessories become hot during use. Allow the unit and all

accessories to cool before removing any accessories.

Removing an accessory (Fig. K)

u Twist the accessory (29) clockwise then pull away from

the hose (27).

Removing the hose (Fig. K)

u Press in the clips (29) on either side of the hose (27) and

pull away from the steam nozzle (4).

Removing the variable steam jet nozzle (Fig. L)

u Press in the clips (30) on either side of the variable steam

jet nozzle (31) and pull away from the steam nozzle (4).

Use

Important! This unit will kill 99.9% of bacteria & germs when

used in accordance with this manual and with the micro bre

pad tted and a continuous run time of 90 seconds.

Switching on and off (Steam mop)

u To switch the appliance on, press the ON/OFF button (1).

It takes approximately 15 seconds for the steam mop to

heat up.

Note: When the steam mop is rst turned on the water res-

ervoir will glow red. Once the steam mop is ready to use the

water reservoir will glow blue.

u To switch the appliance off, press the ON/OFF button (1).

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Black Decker FSMH1621S T1 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Andere handleiding(en) van Black Decker FSMH1621S T1

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info