709570
5
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
5
ENGLISH
(Original instructions)
Attaching the hose and accessories (Fig. A & B)
Warning! Inspect the seal (2a) on the steam nozzle (2) and
hose (3) before each use. If the seal is missing or damaged
then please contact your nearest authorised repair agent. Do
not use the appliance.
Attaching the hose (Fig. A)
u Press in the clips (3a) on either side of the hose (3).
u Press the hose (3) onto the steam nozzle (2) and release
the clips (3a).
Important! Ensure that the hose (3) is securely fastened
before using SteaMitt
TM
. If steam escapes from the joint then
the SteaMitt
TM
is not correctly tted, allow the unit to cool then
remove and re-t the hose.
Removing the hose and accessories (Fig. A & B)
Warning! The Steam nozzle, hose and SteaMitt
TM
become hot
during use.
Allow the unit and all attachments to cool before removing.
Removing the hose (Fig. A)
u Press in the clips (3a) on either side of the hose (3) and
pull away from the steam nozzle (2)
Filling the water tank (Fig. C)
Note! Fill the water tank with clean tap water. Donot use
chemicals or any other additives.
Note! In areas of very hard water, the use of de-ionised water
is recommended.
u Switch off the unit and disconnect from the mains supply.
u Open the ller cap (7) by ipping it up.
u Fill the water tank (6) with water.
Warning! Your water tank has a 0.10 litre capacity. Do not
over ll the tank.
u Replace the lter cap.
Note: Ensure the lter cap is rmly secured.
Note: Do not use chemical cleaners with your SteaMitt
TM
.
Fitting the cleaning pad (Fig. B)
u Fit the cleaning pad (9) to the SteaMitt
TM
(4) by attaching
the 'loop' velcro strips (9a) on the upper side of the
cleaning pad, to the 'hook' velcro pads (4a) on the
underside of the SteaMitt
TM
(4). Press down rmly.
Warning! The SteaMitt
TM
should not be used without tting a
cleaning pad.
Note: The SteaMitt
TM
accommodates 3 types of cleaning pads
of varying thickness. The thinnest can be used for cleaning 3D
forms such as taps etc. The thicker versions can be used for
larger at areas.
Use
Switching on and off
u To switch the appliance on, press the ON/Off button (5). It
takes approximately 15 seconds for the SteaMitt
TM
to heat
up.
Note: always have your hand inside the SteaMitt
TM
before you
press the steam button.
u To produce steam, press the steam button (1) on top of
the unit.
u To switch the appliance off, turn off the steam switch (1)
then press the ON/OFF button (5).
Caution! Always empty the SteaMitt
TM
water tank after use.
Note! When rst lled or after running dry, it can take up to 45
seconds for steam to be produced.
Hints for optimum use
General
u For optimal cleaning results never use the SteaMitt
TM
without rst attaching a cleaning pad.
u Do not use chemical cleaners or any other additives with
your SteaMitt
TM
.
u Delicate surfaces, mirrors for example, should be cleaned
first while the pad is at its driest, thereby avoiding streaks.
u Do not use the SteaMitt
TM
on cold glass, such as windows
as damage may be caused by the sudden change in
temperature.
Caution! It is important to monitor the water level in the water
tank (6). To rell the water tank and continue to sanitize/clean
turn the SteaMitt
TM
'OFF'. Unplug the unit from the electrical
wall outlet, rell the water tank (6).
@
Warning! Always use the SteaMitt
TM
as shown in figure
E, with your hand inside the protective glove.
@
Warning! Never attempt to use the SteaMitt
TM
by
gripping it externally as shown in figure F. This will result
in scalding.
@
Warning! Avoid using the SteaMitt
TM
in tight corners as
shown in gure H.
@
Warning! Should a problem occur during use, use the
quick release tab (8) to quickly remove the SteaMitt
TM
from your hand as shown in gure I.
After use (Fig. E)
u Turn the SteaMitt
TM
'OFF'. Turn the steam operation button
(1) to off and then press the ON/OFF button (5).
u Wait until the SteaMitt
TM
cools down.
u Unplug the SteaMitt
TM
from the electrical wall outlet.
u Empty the water tank.
u remove the cleaning pad (9) and wash it ready for next
use.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker FSH10SM bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker FSH10SM in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 3,87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info