709449
10
Verklein
Vergroot
Pagina terug
1/148
Pagina verder
10
ENGLISH
(Original instructions)
u Replace the kerf plate when worn.
u Do not use blades of larger or smaller diameter than
recommended. For the proper blade rating refer to the
technical data. Use only the blades specied in this
manual, complying with EN 847-1.
u Do not use High Speed Steel (HSS) saw blades.
@
Warning! Contact with or inhalation of dusts
arising from sawing applications may endanger
the health of the operator and possible bystanders. Wear a
dust mask specically designed for protection against dust
and fumes and ensure that persons within or entering the
work area are also protected.
u Do not work with material containing asbestos. Asbestos
is considered to be carcinogenic.
u Wear gloves when handling saw blades and rough
material (saw blades should be carried in a holder when
practicable).
u Wear hearing protection to reduce the risk of induced
hearing loss.
u Consider using specially designed noise-reduction blades.
u Wear eye protection to reduce the risk of personal injury.
u Use the dust bag provided when sawing wood.
u Hold power tool by insulated gripping surfaces when
performing an operation where the cutting accessory
may contact hidden wiring or its own cord.
Cutting accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and could give
the operator an electric shock
u Select the correct blade for the material to be cut.
u Do not operate the machine without the guard in position.
Do not operate the machine if the guard does not function
or is not maintained properly.
u Ensure that the arm is securely xed when performing
bevel cuts.
u Before each cut ensure that the machine is stable.
u Keep handles dry, clean and free from oil and grease.
u Keep the surrounding area of the machine well maintained
and free of loose materials, e.g. chips and off-cuts.
u Ensure the machine and the work area are provided with
adequate general or localised lighting.
u Do not allow untrained people to operate this machine.
u Ensure that the blade is mounted correctly before use.
Make sure that the blade rotates in the correct direction.
Keep the blade sharp. Follow instruction for lubricating
and changing accessories.
u Ensure the speed marked on the saw blade is at least
equal to the speed marked on the saw.
u Ensure that any spacers and spindle rings used are
suitable for the purpose as stated by BLACK+DECKER.
u Repairs to the cut line guidance system should be carried
out by authorised repair agents or BLACK+DECKER
service staff.
u Unplug the machine before carrying out any maintenance
or when changing the blade.
u Never perform any cleaning, maintenance, removal of any
off-cuts or other parts of the work piece form the cutting
area when the machine is running and the saw head is not
in the rest position.
u When possible, always mount the machine to a bench.
u Make sure all locking knobs and handles are tight before
starting any operation.
u Never use your saw without the table insert.
u Never attempt to stop the machine in motion rapidly by
jamming a tool or other means against the blade; serious
accidents can be caused unintentionally in this way.
u Before using or tting any accessory consult the instruc-
tion manual. The improper use of an accessory can cause
damage.
u Raise the blade from the table insert in the work piece
prior to releasing the on/of switch.
u Do not wedge anything against the fan to hold the motor
shaft.
u The blade guard on your saw will automatically raise when
the arm is brought down; it will lower over the blade when
the arm is raised. The guard can be raised by hand when
installing or removing saw blades or for inspection of the
saw. Never raise the blade guard manually unless the
machine is switched off.
u Check periodically that the motor air slots are clean and
free of chips.
u Never make the warning signs on the power tool unrecog-
nisable.
u Never stand on the power tool. Serious injuries could
occur when the power tool tips over or when coming in
contact with the saw blade.
u Do not take hold of the saw blade after working before it
has cooled. The saw blade becomes very hot while work-
ing.
u To avoid injury from materials being thrown, unplug the
saw to avoid accidental starting, and then remove small
materials.
u Before use and after any maintenance the blade guard
must be checked to ensure proper function. This test must
be performed with the saw switched off and unplugged.
The arm must be raised and lowered to ensure the
guard covers the blade and the blade does not contact
the guard. If the guard fails to operate correctly, have
your power tool serviced by a qualied repair agent. Call
BLACK+DECKER customer services for you nearest
service agent.
u This mitre saw has been designed for sawing wood,
plastic and nonferrous metal only. Do not use the saw
to cut other materials than those recommended by the
manufacturer.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Black Decker BES700 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Black Decker BES700 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 12,24 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info