655053
4
Verklein
Vergroot
Pagina terug
1/13
Pagina verder
6
DS909839-001 DS909839-001
7
In this mode, the switchboard intercepts all the calls coming from the door unit and rings with a dual-tone
sound; when a call arrives, the led “S” starts blinking red and stays on until the conversation end.
To answer the call, the attendant must pick the handset up and speak BY KEEPING the button
PRESSED. To
activate the electric lock, press the button “DOOR OPENER”.
After answering, to call a user it is necessary to enter the code associated to the desired user and press the
button
. The status led blinking red changes and becomes steady red for about two seconds and then
becomes yellow to indicate to the attendant that the call has been forwarded and the switchboard is waiting
for an answer; to connect the called user to the door unit, press one of the two “R” buttons. It is possible
to connect a user called by the switchboard only if the switchboard has received before a call from the door
unit.
At any time, except when a conversation is already in progress, any user can call the switchboard attendant by
pressing the “DOOR OPENER” button present on his door phone or video door phone.
Also the attendant can call any user at any time, simply by entering the associated code and then pressing
the button
.
If the attendant, after calling a user, while he is waiting for an answer (the status led is yellow), wants to
call another user, he must interrupt the fi rst call by hanging the handset up, in order to put the switchboard
back in standby mode. When the status led will light again in green, the attendant will be able to perform a
new call.
“Partial” mode.
The led “S” blinks in green.
In this mode, the switchboard allows all calls to pass and directly arrive to the called user, but, however, it
can call and be called by all the users.
S LED
The status led “S”, present on the switchboard cover, is a bicoloured led and provides the following
information:
off
Switchboard in NIGHT mode, deactivated.
green
Switchboard in standby, in TOTAL DAY mode.
green blinking
Switchboard in standby, in PARTIAL DAY mode.
red blinking
It signals the presence of a call coming from the door unit.
red
A communication in progress is going to be forwarded.
yellow
The communication has been forwarded to the desired user and the switchboard is
waiting for an answer.
COMMAND FOR RING VOLUME ADJUSTMENT
On the switchboard it is possible to adjust the ring level of calls coming from a door unit. The level can be
high, medium and low and can be adjusted with a switch accessible from the lower switchboard edge. It is not
possible to adjust the volume of calls coming from apartment stations.
AN9839/1 CONCIERGE SWITCHBOARD
The switchboard allows the following functions:
Audio conversation with door units
Door opening
Electronic call to users
Capability to adjust the ring level among high, medium and low
Capability to select operating mode between DAY/NIGHT
Capability to select the management mode between PARTIAL/TOTAL
Two signalling leds available for auxiliary information (for ex. Open door)
Button for audio
enabling with door unit
Call forwarding buttons
Door opener button
Bicoloured STATUS led
TOTAL/PARTIAL button
Apartment station call button
Switch for call volume adjusting
Green led available from outside
Red led available from outside
Day/Night button
Fig. 2
USE
The switchboard has two different operating states, that can be selected by the attendant:
NIGHT MODE
The status LED (Fig. 2) is off.
In this mode, the switchboard is disabled and the system operates as if the switchboard was not present,
allowing visitors to directly call users, that of course can answer and open the door lock.
In this operating mode, users can not call or be called by the switchboard.
In case of mains fail, the switchboard will operate as if it was in “night” mode. After mains return, the
switchboard will continue to operate in “night” mode, regardless of the state it was before the power-
off.
By pressing the button
, the switchboard is enabled to operate in “DAY” mode.
DAY MODE
In this mode the switchboard is active and can operate in two different ways, called “TOTAL” and “PARTIAL”.
The button “P/T” allows to select the operating mode between Total and Partial.
At power-on, it is automatically set in TOTAL mode; by pressing the button, the switchboard operating mode
will change in PARTIAL mode.
The operating mode is signalled by the status led “S”, that lights steady or blinking.
“Total” mode.
The status led “S” lights green.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Bitron-Video-AN9839---LBT90264

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bitron Video AN9839 - LBT90264 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bitron Video AN9839 - LBT90264 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 0,74 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info