9
www.bissell.com 800.237.7691
Operation
Fill the water tank
1. Release the handle and lay the machine
handle back to access the tank.
2. Remove the tank from the base of the
machine by lifting the tank carry handle.
3. Carry like a bucket to the sink. Rotate the handle for-
ward to unlatch the lid. Lift off and set the lid aside.
4. Fill up the bladder with clean hot tap water.
*Do not boil or microwave water as it can
destroy the bladder.
5. Replace the top of the tank by matching the
lid and tank edges. Handle must be in the
forward position in order to replace lid. Rotate
Note: Remember to secure the lid and test to make
sure it is secure before picking up the Tank.
6. Place tank into machine base, seating firmly in place.
Rotate tank handle back into latched position. Bring
machine handle back into upright position.
Fill the SmartMix/formula tank
1. Lift the formula tank up and out of the
machine base.
2a. Fill the formula tank by first unscrewing the cap
and insert. Always use genuine BISSELL formulas
to maximize cleaning and for the safety of your
machine. Fill formula up to the line and replace
the cap and insert. Place formula tank into the
slot in the back of the machine for a snug fit.
2b. If using the BISSELL 3X Concentrated Fiber
Cleansing Formula: Add 3 capfuls of 3X
Concentrated Fiber Cleansing formula to the
formula tank, and then fill with hot water
to the line.
Note: If bottle leaks, check for proper positioning
of red grommet and straw.
Choose the SmartMix setting
Simply choose one of the 3 settings
•HeavyTraffic
•Normal
•WaterRinse
and the ProHeat will adjust the right amount of
cleaning solution to mix with the heated water to
fit your cleaning need.
NOTE: When your cleaning job is finished, the
formula can be stored ready to use in your
machine for the next time!
