Your 3 Way / Featherweight Vacuum may be used in one of three ways. See
instructions below for converting your vacuum to best meet each need.
As a Floor Vacuum:
Open the Latch at the base of the Hand Vacuum Grip and insert Handle.
Once Handle is all the way inserted into the body of the vacuum, press the
Latch closed to secure the Handle in place. Attach the Floor Nozzle by
inserting it into the opening at the bottom of the Dirt Container. Press firmly
to secure in place.
As a Hand Vacuum:
Release the Latch from the Handle and pull Handle away from the unit.
Press the Latch closed.
As a Multi-Purpose Vacuum:
The Crevice Tool and Floor Nozzle may be used with either the Hand
Vacuum or the Floor Vacuum. To use for cleaning in tight spaces, insert the
Crevice Tool into the opening at the bottom of the Dirt Container. Press
firmly to secure in place. To clean a wider surface, remove the Crevice Tool
and attach the Floor Nozzle by inserting it into the opening at the bottom of
the Dirt Container. Press firmly to secure in place.
Turn Vacuum off.
Unplug Power Cord by grasping the polarized plug, NOT the cord,
and disconnect from outlet.
Loop Power Cord around Cord Wraps on the Handle.
Clip molded plug to Power Cord to secure.
To maintain maximum performance from your BISSELL 3 Way / FeatherWeight
Vacuum, perform these simple maintenance checks:
To remove dirt from the Dirt Container and Filter, hold the vacuum vertically
as shown. Depress and hold Latch on top of the vacuum to release the Dirt
Container.
Gently pull Dirt Container away from the Hand Vacuum Grip and empty into
waste container.
The Dirt Container may be rinsed with warm water and a mild detergent if
needed. The Dirt Container must be thoroughly dried before replacing.
Attach Dirt Container to vacuum by depressing Latch and securely
fitting onto Hand Grip. Make sure Dirt Container is correctly secured.
How to Use Your BISSELL 3 Way / FeatherWeight Vacuum
Power Cord Storage
Emptying the Dirt Container
1.
2.
3.
1.
2.
3.
4.
WARNING:
To avoid injury, turn cleaner
OFF and unplug Cord from
wall when not in use.
Maintenance
1.
2.
3.
4.
1
2
3
1
2
5
