17
If the call is from someone who withheld their number, e.g. by dialling 141,
will display.
If the call is from someone whose number is unavailable, e.g. an international
call or from a private exchange, “OUT OF AREA” will display.
If you've got new Caller Display records, the handset will display "X NEW
6.1 View the Call List
CALLS" in standby mode. The New Calls
indication will remain until all the new
call records have been viewed on that handset.
1. Press <UP> to access the call list.
OR Press <MENU> and <UP/DOWN> to show CALL LIST, then press OK.
2.
3.
6.2 Store a Call List Number into the Phonebook
1. Follow Steps 1 and 2 in Section 6.1.
2. Press <MENU> and <UP/DOWN> to show ADD TO PB.
3. Press <OK> and then enter the name.
4. Press <OK> and the selected call list number is displayed.
5. Edit the number if necessary.
6. Press <OK> and <UP/DOWN> to select the ringtone.
7. Press <OK> to store the phonebook entry and return to the calls list.
4
.
Press <MENU>, <UP/DOWN> to show , and then <OK> to display
the date and time of the call. Press <OK> to go back to the previous screen.
6.3 Delete an entry in the Call List
1. Follow Steps 1 and 2 in Section 6.1.
2. Press <MENU> and <UP/DOWN> to select DELETE.
3. Press <OK> to confirm.
6.4 Delete
1. Follow Steps 1 and 2 in Section 6.1
.
2. Press <MENU> and <UP/DOWN> to select DELETE ALL
3. Press <OK> to display CONFIRM?.
4. Press <OK> to confirm. All entries will be deleted and the display will show
EMPTY.
7 PHONE
Your phone comes with a selection of settings that you can change to
personalise your phone the way you like it to work.
7.1 Date and Time Settings
If you subscribe to Caller Display the time and date settings will be automatically
updated by the
The Caller Display service only sends the month and date, not the year, so you
may need to set the year.
7.1.1 Change the Date Format
1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.
2. Press <OK> and <UP/DOWN> to select DATE & TIME.
3. Press <OK> and <UP/DOWN> to select DATE FORMAT.
18
4. Press <OK> and <UP/DOWN> to select your desired date format
(DD-MM-YYor MM-DD-YY
).
5. Press <OK> to confirm.
7.1.2 Change the Time Form
1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.
2. Press <OK> and <UP/DOWN> to select DATE & TIME.
3. Press <OK> and <UP/DOWN> to select TIME FORMAT
.
4. Press <OK> and <UP/DOWN> to select your desired time format
5. Press <OK> to confirm.
7.1.3 Set the Time
1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.
2. Press <OK> and <UP/DOWN> to select DATE & TIME.
3. Press <OK> and <UP/DOWN> to select SET TIME.
4. Press <OK> and then enter the time information in 24 hour format.
5. Press <OK> to confirm.
Note: If time has been set before, the current time will display, otherwise,
“HH:MM ”
will display.
7.1.4 Set the Date
1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.
2. Press <OK> and <UP/DOWN> to select DATE & TIME.
3. Press <OK> and <UP/DOWN> to select SET DATE.
4. Press <OK> and then enter the date information. The date entered will be in
5. Press <OK> to confirm.
Note: If date has been set before, the current date will display, otherwise,
the format you set in Section 7.1.1.
“DD-MM-YY ” will display.
7.2 Alarm
You can set an alarm time on the handset. When an alarm is set, the <ALARM
Icon> is shown on the handset display.
<ALARM icon> and “ALARM ON ” flash on the handset display, and the alarm
tone rings for 45 seconds. You can press any key to disable the alarm. If the
snooze function is activated, the alarm will sound again at the end of the snooze
period of seven minutes. You can also press and hold <TALK OFF> while the
Note:
a. A key press will still disable the alarm even if the handset keypad is locked
b. The alarm volume level is the same as the settings of the handset ringer
volume. If the handset ringer is set to VOLUME OFF , the alarm still sounds
at VOLUME 1
level.
when the alarm rings.
(12 HR or
24 HR).
19
c. During an external call or internal call, if an alarm is set and when the alarm
time is reached, the <ALARM icon> and “ALARM ON” will still flash. An
alarm tone will be emitted from the earpiece to alert the user the alarm time
is reached. Once the user presses any key or presses and holds
d. During paging or ringing, the alarm will not sound when the alarm time is
reached. However, if the snooze function is enabled and there is no paging
7.2.1 Turn on/off the Alarm
1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.
2. Press <OK> and <UP/DOWN> to select ALARM.
4. Press <OK> to confirm.
Note: If ON is selected, you will be asked to set the alarm time.
7.2.2 Set the Alarm Time (If Alarm time is set to be ON)
1. Follow Steps 1 to 4 in Section 7.2.1.
2. Enter the alarm time in 24 hour format.
3. Press <OK> to display "SNOOZE".
4. Press <OK> and <UP/DOWN> to select snooze ON or OFF.
5. Press <OK> to confirm.
7.3 Handset
7.3.1 Set the Ringer Melody for Internal Calls
1. Press <MENU> and <UP/DOWN> to select HS SETTINGS
2. Press <OK> and <UP/DOWN> to select RING SETUP
3. Press <OK> and <UP/DOWN> to select INT RING.
4. Press <OK> and <UP/DOWN> to select the melody you want to hear for
Note: The respective melody will be played while browsing the ringtone list.
5. Press <OK> to confirm.
3. Press <OK> and <UP/DOWN> to select ON/OFF.
<TALK OFF> to disable the alarm, the display will revert to the call duration.
or ringing, the alarm will sound again at the end of the snoo .
internal calls.
7.3.2 Set the Ringer Melody for External Calls
1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.
2. Press <OK> and <UP/DOWN> to select RING SETUP .
3. Press <OK> and <UP/DOWN> to select EXT RING.
4. Press <OK> and <UP/DOWN> to select melody you want to hear for external
Note: The respective melody will be played while browsing the ringtone list.
5. Press <OK> to confirm.
7.3.3 Set the Ringer Volume
1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.
2. Press <OK> and <UP/DOWN> to select RING SETUP .
3. Press <OK> and <UP/DOWN> to select RING VOLUME .
4. Press <OK> and <UP/DOWN> to select the desired ringer volume (a total of
6 ringer volume levels including VOLUME OFF).
Note: The respective ringer volume will be played during your selection.
If VOLUME OFF is selected, the <Ringer Off> icon will be displayed.
5. Press <OK> to confirm.
7.3.4 Set Alert Tones
Three different alert tones are set on by default, but can be turned off, if desired.
Key Tone - a single beep is emitted when you press a key.
you need to charge the handset batteries.
1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.
2. Press <OK> and <UP/DOWN> to select TONE SETUP.
3. Press <OK> and <UP/DOWN> to select KEY TONE / BATTERY TONE /
4. Press <OK> and <UP/DOWN> to turn on or off these tones.
5. Press <OK> to confirm.
Out of Range Tone - emitted while you are talking on the phone to alert you to
move loser to the base unit, before the call is lost.
Low Battery Tone - emitted while you are talking on the phone to alert you that
OUT OF RANGE.
7.3.5 Set the Handset Language
1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.
2. Press <OK> and <UP/DOWN> to select LANGUAGE.
3. Press <OK> and <UP/DOWN> to select the desired language.
4. Press <OK> to confirm.
7.3.6 Ren
ame
1. Press <MENU> and <UP/DOWN> to select HS SETTINGS
2. Press <OK> and <UP/DOWN> to select RENAME HS.
3. Press <OK> and change the name of your handset, using <C/MUTE> to delete
4. Pres
s <OK> to confirm.
letters and the alphanumeric keys to enter up to 10 letters for the name.
7.3.7 Choose the Information to be Displayed
You can choose to display the time or handset name in your idle screen.
1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.
2. Press <OK> and <UP/DOWN> to select HS DISPLAY.
3. Press <OK> and <UP/DOWN> to select HANDSET NAME or TIME.
4. Press <OK> to confirm.
7.3.8 Set the Auto Answer
If you turn on the Auto Answer, you can answer a call automatically by just lifting
1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.
2. Press <OK> and <UP/DOWN> to select AUTO ANSWER.
3. Press <OK> and <UP/DOWN> to turn on or off the auto answer feature.
4. Press <OK> to confirm.
the handset off the base or charger, without having to press any key.
calls.
21
20
7.4 Base
7.4.1 De-re
This operation should only be necessary if one of your handsets becomes faulty
or lost and needs to be replaced.
You will need to enter the 4-digit System PIN (Default PIN is 0000) in order to
Note: You cannot de-register the handset that you are currently using.
1. Press <MENU> and <UP/DOWN> to select BS SETTINGS.
2. Press <OK> and <UP/DOWN> to select DELETE HS.
3. Press <OK> and the display shows "PIN?".
the antenna icon flashing and "REGISTER" on the display.
de-register a handset from the base station.A de-registered handset will have
22
4. Enter the 4-digit system PIN.
5. Press <OK> and the first handset number is displayed.
6. Press <UP/DOWN> to scroll through the list of registered handsets and
7. Press <OK> to confirm, and the chosen handset will be de-registered.
select
the number of the handset you want to de-register.
network when you receive an incoming call.
7.4.2 Change the dial mode
1. Press <MENU> and <UP/DOWN> to select BS SETTINGS
2. Press <OK> and <UP/DOWN> to select DIAL MODE.
3. Press <OK> and <UP/DOWN> to select TONE or PULSE
(The current setting is indicated by an asterisk to the right).
4. Press <OK> to confirm.
You should normally leave the dialling mode at its default setting of TONE (also
called DTMF) unless the phone is connected to an old exchange that only
Note: If PULSE dialling is set, you can press the * key to switch to TONE dialling
recognises PULSE dialling.
for the rest of that call.
7.4.3 Change the Flash (Recall) Time
1. Press <MENU> and <UP/DOWN> to select BS SETTINGS.
2. Press <OK> and <UP/DOWN> to select FLASH TIME.
3. Press <OK> and <UP/DOWN> to select your desired flash time (SHORT,
4. Press <OK> to confirm.
You may need to change the recall (flash) time if your phone is connected to a
PBX. The recall time options are SHORT (the default value of 100ms), MEDIUM
( 0ms) or LONG (600ms).
MEDIUM,
7.4.4 Change the System PIN Code
A 4-digit system PIN code is used for changing the system settings of the base
station. It is used to protect your phone against unauthorised use. The default
system PIN code is 0000.
1. Press <MENU> and <UP/DOWN> to select BS SETTINGS.
2. Press <OK> and <UP/DOWN> to select CHANGE PIN .
3. Press <OK> and you are requested to enter the 4-digit system PIN.
4. Enter the old system PIN.
5. Press <OK> and enter the new system PIN.
6. Press <OK> and enter the new system PIN again.
Note: If the new PIN entered in Step 6 is not the same as the new system PIN
entered in Step 5, you must enter the new system PIN at step 5 again.
7. Press <OK> to confirm
“WITHHELD”
7.5 Registration
already registered to your base, so you do not need to register them.
You can register additional handsets to have up to five handsets per base unit,
with each handset's number (1 to 5) shown on its display. (Note: each handset
1.
Press and hold <PAGE> on the base station for more than five
seconds, to put the base station into registration mode. (Note: there is no feedback to
It will stay in registration mode for about
To register a new handset to your base:
within
this
time
2. Press <MENU> and <UP/DOWN> to select REGISTRATION.
3. Press <OK> and you are requested to enter the 4-digit system PIN.
4. Enter the 4-digit system PIN.
5. Press <OK> to confirm, and the display will show SEARCHING.
If the handset registration is successful, you will hear a confirmation tone and the
<antenna icon> will stop flashing. This may take a short while.
The handset will automatically be allocated the next available handset number.
This handset number is shown in the handset display in standby mode. If the
handset registration is unsuccessful, the <antenna icon> will still flash and the
7.6 Reset
You can reset your phone to the default settings . After a reset, all
your personal
settings, call list entries, redial list entries, and answering machine messages will
1. Press <MENU> and <UP/DOWN> to select
DEFAULT.
2. Press <OK> and you are requested to enter the 4-digit system PIN.
3. Enter the 4-digit system PIN.
4. Press <OK> to display CONFIRM?
5. Press <OK> to confirm, and the phone will be reset to its default settings.
23
24
can only be registered to one base.)
1 minute, so the following handset sequence must be completed
unchanged.
DECLARATION OF CONFORMITY
25
UK (BTP) Ver1,2009
6 CAL
This feature is available if you have subscribed to the Calling Line Identification
service with your network service provider. Your phone can store up to 10
received calls with date/time information in the Call List. The number will be
shown on the handset display when the phone is ringing. If the number matches
with one of the entries in your Private Phonebook, the caller’s name stored in the
private phonebook will be displayed alternately with the number, and the
handset will ring with the ringtone associated with that phonebook entry.
Problem Causes Solutions
No dialling tone when
pressing <TALK ON>
a.The connection cord of
the base station is not
plugged in.
b.The adapter cord is not
plugged in correctly in
the base station.
c. Another handset is using
the base to make a call.
d. Wrong telephone line cord
a.Check the connections. Unplug
and plug back in the mains.
Check that the telephone cord
has been plugged into the base
station and the phone socket.
b.Check the base station plug and
the 230V plug (remove and plug-in).
c.Wait until the line is unoccupied.
d.Use the original telephone line
cord supplied
When connect to a PBX,
no and/or wrong connection
after dialling
Dialling prefix is needed. Indialling
"SEARCHING" is displayed.
a. Base station out of
range.
b. Base station not
connected to mains.
Reduce the range.
Connect base station to
mains.
The call does not work.
Service not activated or
wrong operator or wrong
setting
Check your Subscription with
network or change the dial mode.
No display. Empty battery Recharge battery
key
Technical Support
If the fault
Disconnect all otherconnected to the
Disconnect the basefrom the telephone
the master telephone socket.
Try making
If the cal two-way socket adapter, remove
it and plug a telephone directly into the socket.
may be faulty.
Please contact the technical support of the network provider for further information.
This telephone is not equipped with a grounding function
used in PBX systems.
Lifestyle 191
all list
alarm is sounding, to stop the alarm and turn off the snooze function.
ze period
c
30
LONG,
with the current setting indicated by and asterisk to the
right).
IMPORTANT: When you purchase a Lifestyle 1910 system, all handsets are
Handset registration is only necessary when you buy extra handsets or if a
handset has become faulty.
be deleted but your phonebook remains
, and therefore some of
the functions may be limited when
11
We the manufacturer / Importer : Binatone Telecom Plc,
1 Apsley Way London, NW2 7HF.
Declare under our sole responsibility that the following product
Type of equipment:
Digital cordless telephone
Model Name:
Country of Origin:
China
Brand:
complies with the essential protection requirements of R&TTE Directive 1999/5/EC on
the approximation of the laws of the Member States relating to Radio Spectrum Matters ,
the Council Directive / /
Statesrelating to electromagnetic compatibility (EMC) and the European Community
Directive 2006/95/EC relating to Electrical Safety.
Assessment of compliance of the product with the requirements relating to the
essential requirements according to Article 3 R&TTE was based on Annex III of the
Directive 1999/5/EC
Radio Spectrum: EN 301406: V1.5.1:2003
;
EMC: EN 301489-1:V1.5.1:2005
;
EN 301489-6:V1.2.1;2002;
Electrical Safety: EN 60950
-
1:2006.
Manufacturer / Importer
(signature of authorized person)
200
Date
Signature
Binatone
The conformity to the
symbol.
NOTE: In compliance with you purchase a product
that comes with the symbol shown on the right, you are required to dispose of
electrical and electronic equipment by separate waste collection and you
cannot dispose of the product as normal waste.
This equipment and all its components, subsystems and consumable materials
formed an
integral part of this product and when you decide to dispose
takethem to a local recycling centre for
appropriate waste disposal, in compliance with the current regulations.
Details about the location of these centres can be obtained from
your local authority.
of them you have to
Lifestyle 1910 Series
Notes for battery disposal
Your product contains batteries covered by the European Directive 2006/66/EC,
which cannot be disposed of with normal household waste.
Please be aware of the local rules on separate collection of batteries. The
correct disposal of batteries helps protect
the environment and
.
10 9
ANSWERING MACHINE
Your phone includes a telephone answering machine that records unanswered
calls when it is on.The answering machine can store up to 59 messages within
record memos for other users of your phone.
If the answering machine memory is full, the Handset will display
TAM FULL alternately with the handsets name or time, depending on the
1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.
2. Press <OK> and <UP/DOWN> to select TAM ON/OFF.
3. Press <OK> and <UP/DOWN> to select
ON or OFF.
4. Press <OK> to confirm.
¾ If answering machi
LCD.
¾ If answering machi
handset LCD.
.2 Listen
When new messages are recorded on the answering machine, the <TAM icon>
flashes on the handset display until all the new messages are played.
After a new message is played it will be saved as an old message automatically
unless it is deleted.
Old messages will be played after all new messages are played completely.
1. Press the TAM Control key <PLAY / STOP> to start the message
playback and the screen displays the date and time information of the
Note: A <STAR icon> is placed at the centre of the bottom of the handset
display to indicate that it is a new message.
When a message has been played, the <STAR icon> will disappear and will
2
You can turn the answering machine on or off using the handset.
When the answering machine is set to ON, calls will be answered after the
set answer delay and the caller can then leave you a message.
When the answering about
handset standby display mode set (see section 7.3.7), and you will have to
the maximum recording time of up to 15 minutes, depending on which
As well as recording
8
8.1 Turn On/Off the Answering Machine
8
WN> to increase or decrease
the message playback volume
Alternatively, press <MENU> and <UP/DOWN> to select STOP, FORWARD,
DELETE to perform the functions
Note: Alternatively, you can use the following shortcut keys to control different
Press <Key 5> to stop message playback.
Press <Key 4> once to skip to repeat playing the current message from the
Press <Key 6> to skip to play next message.
Press <Key 2> to delete the current message playback.
beginning.Press twice to skip backward to play the previous message.
operations during message playback.
1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.
2. Press <OK> and <UP/DOWN> to select DELETE ALL.
3. Press <OK> to display CONFIRM?
4. Press <OK> to delete all old messages.
Note: If there are no more messages in the answering machine, " EMPTY "will
display and
return back to ANS. MACHINE menu.
You can record your memo message for another user. When you record a memo,
the message can be played back
messages. Memo recording can still
function even when the answering machine
1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE .
2. Press <OK> and <UP/DOWN> to select
MEMO.
3. Press <OK> to start memo recording and
“
RECORDING
”
is displayed.
4. Press <OK> to stop memo recording and save the memo.
OR
4. Press <C> to stop memo recording without saving and return back to
ANS. MACHINE
menu.
You can use the TAM SETTINGS menu through the handset to change the
settings of your answering machine.
By default, the answer machine is set in
ANS & REC
mode which allows callers
to leave a message. This mode can be changed to ANSWER ONLY which
does not allow callers to leave a message. In that case, your callers will be
1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE .
2. Press <OK> and <UP/DOWN> to select TAM SETTINGS .
3. Press <OK> and <UP/DOWN> to select ANSWER MODE .
4. Press <OK> and <UP/DOWN> to select ANS & REC or ANSWER ONLY
.
5. Press <OK> to confirm.
The answering machine announces the outgoing message when it answers a call.
There is a pre-set OGM for each of mode or ANSWER ONLY
on this model.
prompted to call back later.
You can record your own OGM for ANS & REC mode and ANSWER ONLY
mode.
When you record your own OGM, it will be used when the answering machine
answers the call. If your personalised OGM is deleted, the pre-set OGM will be
1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE .
2. Press <OK> and <UP/DOWN> to select TAM SETTINGS .
3. Press <OK> and <UP/DOWN> to select OGM SETTINGS .
4. Press <OK> and <UP/DOWN> to select ANS & REC or ANSWER ONLY .
5. Press <OK> and <UP/DOWN> to select RECORD MESS .
restored automatically.
1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE .
2. Press <OK> and <UP/DOWN> to select TAM SETTINGS .
3. Press <OK> and <UP/DOWN> to select TAM LANGUAGE .
4. Press <OK> and <UP/DOWN> to select your desired OGM language.
5. Press <OK> to confirm.
6. Press <OK> to start recording your personalised OGM and “RECORDING”
7. Press <OK> to stop and save your personalised OGM. Your newly saved
OGM will playback automatically.
Alternatively, press <BACK> to return to
personalised OGM.
6
27
2. Press <OK> and <UP/DOWN> to select TAM SETTINGS .
3. Press <OK> and <UP/DOWN> to select RECORD TIME (Available options:
60S, 120S, 180S, or UNLIMITED)
4. Press <OK> and <UP/DOWN> to select your desired recording time.
5. Press <OK> to confirm.
Your phone lets you check your messages, or otherwise operate your answering
machine, by calling the answering machine when you are away from home
remote access
unauthorised
When the answering machine is on and takes a call, you can listen to the caller
leaving a message. You can then identify the caller and decide whether to take
If the answering machine is set to ON, when
the handset will display SCREENING? ”
1. Press <OK> to start call screening. Any handset can
You can listen to who is leaving the message and decide whether to pick up
2. The handset will display SCREENING”.
3. You can adjust the speaker vo
OR
3. Press <Back> to return to previous
At any time if you want to pick up the call, you can press <TALK ON> and
the message recording will be stopped automatically. If the answering
in the process of recording, the message
the call in person.
machine is
saved.
the call or not.
listen.
1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.
2. Press <OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <OK> and <UP/DOWN> to select CHANGE PIN.
4. Press <OK> and enter the Old PIN. (Default Remote Access PIN is 0000).
5. Press <OK> and enter the New PIN.
6. Press <OK> and enter the New PIN again.
Note: If the new PIN entered in Step 6 is not the same as the new system PIN
entered in Step 5, you must enter the new system PIN at step 5 again.
7. Press <OK> to reconfirm.
4. Press <OK> and <UP/DOWN> to select ON or OFF to turn the remote access
5. Press <OK> to confirm.
.5.9.3 Access Your Answering Machine Remotely
You can ring your phone from another tone-dialing phone to switch the
answering machine on or off, and/or listen to your messages remotely.
1. Place a call from a tone-dialing phone to your phone.
2. When the answering machine answers the call and starts playing the OGM,
Note: The * must be entered while the OGM is still playing, and the 4-digit PIN
3. Enter the 4-digit Remote Access PIN (default PIN is 0000).
Note: If the 4-digit Remote Access PIN is entered incorrectly three times
consecutively, the line will be released automatically.
4. Press the following keys to carry out your desired function.
on or
press <KEY *>.
should be follow without any delays.
)XQFWLRQV
.H\V
:KLOHPHVVDJHLVQRWSOD\LQJ :KLOHPHVVDJHLVSOD\LQJ
'HOHWHWKHFXUUHQWPHVVDJHSOD\ing
5HSHDWSOD\LQJWKHFXUUHQWPHVVDJH
IURPWKHEHJLQQLQJ3UHVVWZLFHWRVNLS
EDFNZDUGWRSOD\WKHSUHYLRXVPHVVDJH
3OD\WKHPHVVDJH 6WRSWKHFXUUHQWPHVVDJHSOD\EDFN
6NLSWRSOD\WKHQH[WPHVVDJH
7XUQRQWKHDQVZHULQJPDFKLQH
6WRSWKHFXUUHQWPHVVDJHSOD\EDFN
7XUQRIIWKHDQVZHULQJPDFKLQH
Note: If your answering machine is switched off, the phone will enter into the
remote access mode after 10 rings.
You can the
n
enter the <KEY *> and the 4-digit remote a
cce
ss PIN (Default
Remote Access PIN is 0000) to activate the remote access feature.
1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.
2. Press <OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <OK> and <UP/DOWN> to select REMOTE ACC.
3
30
When your answering machine memory is full and the answer mode is in ANS &
change
to ANS & RECORD
mode automatically after some messages have
RECORD, the answer mode will change to ANSWER ONLY automatically. It will
been deleted.
Call Screening
29
1
3
2
33
34
9 TROUBLESHOOTING
10
8.3 Delete All Messages in the Answering Machine
8.4 Record
8.5 Answering
8.5.1 Set the Answer Mode
8.5.2 Set the Outgoing Message (OGM) Language.
8.5.3 Record Your Own Outgoing Message (OGM)
8.5.7
8.5.9 Activate Remote Access
8.5.9.1 Change the 4-Digit Remote Access PIN
8.5.9.2 Activate or Deactivate the Remote Access
8
5.4 Edit a Phonebook Entry
In idle:
1. Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press
2. Press <UP/DOWN> to select the desired pho
3. Press <MENU> and <UP/DOWN> to select EDIT.
4. Press <OK> to display the current name.
5. Edit the name and press <OK>.
6. Edit the number and press <OK>.
7. Press <UP/DOWN> to select the ringtone and press <OK> to confirm.
5.5 Delete a Phonebook Entry
In idle:
1. Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press
2. Press <UP/DOWN> to select the desired pho
3. Press <MENU> and <UP/DOWN> to select DELETE
.
4. Press <OK> to confirm, and the entry will be deleted.
5.6 Delete
1. Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press
2.
3.
Press <MENU> and <UP/DOWN> to select DELETE ALL.
4.
Press <OK> to display <CONFIRM?>.
Press <OK> to confirm. All entries will be deleted and the display will show
<EMPTY>.
5.7 Check the Phonebook Usage
You can check how many phonebook entries are stored in your handset and
how many phonebook entries are available for you to store in the phonebook.
1. Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press
2. Press <MENU> and <UP/DOWN> to select PB STATUS.
3. Press <OK> to display how much of the phonebook is being used,
for example < 6/ 20 USED> means 6 entries are stored out of the
total available spaces.
all Phonebook entries
Functions
Keys
While message is playing
2
Delete the current message playing.
4
Repeat playing the current message
5
Play the message
Stop the current message playback
6
Skip to play the next message
7
8
Stop the current message playback
9
Turn off the answering machine
from the beginning. Press twice to
skip backward to play the previous
message.
Turn on the answering machine
While message is not playing
delete some messages before any new ones can be recorded
.
ANS & REC
or French (Francais)
access of your answering machine.
from a tone-dialling phone.
The 4-digit
28
prevent health
hazards
2004 108
Answering Machine
The unit does not record
new messages.
The answering machine is
turned off.
Turn on the answering machine.
The caller cannot leave a
message.
a. The answering machine
is turned off.
b. Message memory is full.
a. Turn on the answering machine.
b. Erase unnecessary messages.
I cannot operate the
answering machine
remotely.
a. You are entering the
wrong remote access code
b. You are pressing the dial
keys too quickly.
c.
You are using a pulse
telephone.
a. If you forget the remote maccess
code, reset to the default settings.
b. Press each key firmly.
c.
Try again using a touch tone p
While recording an outgoing
message or listening to
messages, the unit rings
and
A call is being received.
Answer the incoming call
and try again to record your
out going message later.
OGM during playback and record a new one whenever you want.
Please note that pre-set OGM cannot be deleted.
You can playback your own personalised OGM or the pre-set OGM for ANS &
REC mode or ANSWER ONLY mode and choose to delete your personalised
1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE .
2. Press <OK> and <UP/DOWN> to select TAM SETTINGS .
3. Press <OK> and <UP/DOWN> to select OGM SETTINGS .
4. Press <OK> and <UP/DOWN> to select ANS & REC or ANSWER ONLY .
5. Press <OK> and <UP/DOWN> to select PLAYBACK .
6. Press <OK> to playback your current OGM and
is displayed on the screen.
7. Press <OK> to stop the OGM playback and return to the previous menu.
Note: If a personalised OGM has not been recorded, the pre-set OGM will be played.
8.5.4.2 Delete the Personalised OGM
1. Repeat Steps 1 to 6 in Section 8.5.4.1
2. Press <C> while the OGM is playing to delete your personalised OGM and
return to the previous menu and the pre-set OGM is restored
Note: If the pre-set OGM is playing, you are not allowed to delete it, so pressing
<C> will just stop the playback and return to the previous menu.
You can set the number of rings before the answering ma
starts playing your OGM. You can set the answering machine to answer after
two to eight rings or TIME SAVER. If Time Saver is set the answering machine
1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.
2. Press <OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <OK> and <UP/DOWN> to select ANSWER DELAY (Available options:
2 RINGS, 4 RINGS, 6 RINGS, 8 RINGS or TIME SAVER)
.
4. Press <OK> and <UP/DOWN> to select your desired answer delay.
5. Press <OK> to confirm.
will answer after 4
rings if there are no new messages, or after 2 rings if there is
a new message, so if you call in and you don't get an answer
after 2 or 3 rings, you can hang up and save on call charges
.
"PLAYING OGM"
You can set the maximum length of the recording time of the incoming messages.
1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE
.
8.5.4 Playback and Delete the Outgoing Message (OGM)
8.5.4.1 Playback the OGM
8.5.5 Set the Answer Delay
8.5.6 Set the Recording Time of Incoming Message
c. ANSWER ONLY mode is set.
. Change to ANS & REC mode.
0 system and try to make a call.
Note: Alternatively press <MENU>, <UP/DOWN> to ANS. MACHINE, <OK> to
MSG PLAYBACK, and <OK> to start the message playback.
not be shown when you listen to this message again.
mode, which can only be in English
0
<OK> to access the phonebook.
<OK> to access the phonebook.
<OK> to access the phonebook.
<OK> to access the phonebook.
display will return to "REGISTER", so you will need to repeat the registration
process.
know it is in registration mode.)
message being played.
2. During message playback, press <UP> or <DO
When the alarm time is reached, the
DETAILS
in the same way as answering machine
is turned off.
In idle mode, press and hold the TAM Control key <DELETE>. All old messages
3.
<PLAY/STOP> to stop the playback
<SKIP BACKWARD> to repeat the current message from the start
<SKIP BACKWARD> twice to play the previous message
<SKIP FORWARD> to play the next message
<DELETE> to delete the current message and play the next message.
PREVIOUS,
will be deleted and the display will briefly show EMPTY. New messages will not
be deleted.
Note: If there are no messages, the handset display will briefly show
then return to MSG PLAYBACK.
"00-00 00-00"
During playback, press the TAM Control keys for the following functions:
Note: Alternatively,
prefix
14 rings and the answer only message will be played to your callers. They will
not be able to leave you a message.
All received calls are saved in the Call List,
with the latest
When the call list is full, the oldest call will be replaced by a new call. Any
unanswered calls which have not been viewed are marked with a <*> icon at the
centre of the bottom line of the display.
call at the top of the list.
The
purchase shown on your sales receipt. This guarantee
does not cover any
faults or defects caused by accidents,misuse, fair wear and tear, neglect,
faults on the telephone line, lightning, tampering with the equipment, or any
attempt at adjustment or repair other than through approved agents.
Please keep your sales (till) receipt this is your guarantee.
You should also keep the original packaging material.
In the unlikely event that you need to return your
1. Disconnect the base unit from the telephone line and the mains electricity
supply.
2. Pack up all parts of your Lifestyle
3. Return the unit to the shop where you bought it, making sure you take your
sales receipt.
Remember to include the mains adapter.
3. Call Helpline on 0845 345 9677 (for UK only) and ask for a quotation of the
repair charge and details of where to send your
for repair.
4. Make sure you include with your
5. Return your
If the unit is no longer under Guarantee, first follow steps 1 and 2 as for repair
under Guarantee. Then...
¾ Your name and address
¾ A cheque or postal order for the value of the repair
* This does
Department.
packaging.
Lifestyle
Lifestyle
Lifestyle
Lifestyle 1910
Lifestyle
GUARANTEE AND SERVICE
1910 system is guaranteed for 12 months from the date of
1910 system
to our Repair Centre while it is under guarantee, there may be handling charge.
1910 system , using the original
system
1910 system to the address given by the Service
1910 system.
11.1 While the unit is under Guarantee
11.2 After the Guarantee has expired
2
Three different compression rates (HIGH , MEDIUM and LOW ) are provided for
rate, the higher the recording quality level attained, but the
1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.
2. Press <OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <OK> and <UP/DOWN> to select COMPRESSION.
4. Press <OK> and <UP/DOWN> to select your desired compression rate.
5. Press <OK> to confirm.
you to select different quality levels of recording incoming messages. The lower
the compression
8.5.8 Change the Compression Rate
shorter the total recording time available. ( LOW=7 minutes, MEDIUM=10
minutes, HIGH=15 minutes approx).
compression rate is selected.
incoming messages,you can
¾ A brief description of the fault
