- 11 -
Delivery Contents
Ice Cube Machine
Ice cube collecter container
Operating instructions
Warranty card
Description of the appliance
Device
ᕡ Lid
ᕢ Cooling/Heating pipes
ᕣ Ice cube collecter container
ᕤ Water reservoir (ca. 3,5 Liter)
ᕥ Control panel
ᕦ Drainage valve at the rear of the
Ice Cube Machine
Control panel
ᕧ Control lamps - ice cube size
ᕨ Display - „Content level - Ice cube
collector container“
ᕩ Display - „Content level -
Water reservoir“
µ Button - ON/OFF
¸ Control lamp ON/OFF
¹ Button - Ice cube size
Starting up
Before starting up the appliance, make
certain that ...
- the appliance, power plug and power
cable are in a faultless condition and
- all packaging materials have been
removed from the Ice Cube Machine.
➪ First of all, clean the appliance as
described in the chapter „Cleaning
and Care“.
Note: Allow the Ice Cube Machine to
stand undisturbed for 12 hours before
taking it into use, this will permit the
cooling agent to settle and allow the
appliance to adjust itself to the am-
bient temperature.
ƽImportant: Never cover the ventila-
tion slots. Ensure it is placed at a
sufficient distance from walls
(min.15cm).
Producing ice cubes
1. Place the power plug in a wall socket.
The control lamp ON/OFF ¸ flashes,
showing the standby readiness of the
Ice Cube Machine.
Note: Only use drinking water for
the production of ice cubes.
Note: For health and hygiene reasons
you should dispose of the ice cubes
produced in the first production cycle
and not use them for the cooling of
foodstuffs or drinks.
2. Open the lid ᕡ and remove the ice
cube collector container ᕣ from the
appliance.
3. Pour water in up to the fill marking
(“Fill Line“) inside the water reservoir
ᕤ. The water reservoir holds ca.
3,5 Liters ᕤ.
Note: To achieve correctly sized ice
cubes the water temperature must
lie between 7˚C and 32˚C.
bifinett KH 670
