779863
89
Verklein
Vergroot
Pagina terug
1/233
Pagina verder
88
fully understand the adjustment mechanisms and methods. In any
case, it is recommended that these adjustments be carried out by
qualifi ed personnel only.
DANGER / SAFETY NORM:
The proper positioning and angle of the handlebar is of fundamental
importance for your safety and the safety of others. If your new
bicycle is a racing model, Bianchi invites you to never position
your handlebar upside-down.
If the handlebar of your new Reparto Corse bicycle is bent after a
fall or an accident, it must be replaced; in this case, Bianchi invites
you to avoid straightening the handlebar yourself and to contact a
specialist Dealer immediately.
Brakes
Your new Reparto Corse bicycle can be equipped with three
different types of braking systems: disc brakes, model V-Brake or
Caliper type brakes.
In case your brakes are the V-Brake type, Bianchi recommends the
following procedure to loosen them and/or remove the brake pads:
loosen the end of the brake outer cable – the metallic part of the
sheathing – tightening the brake body at the same time (fi g. 4).
To loosen the caliper brakes and/or remove the brake pads, Bianchi
recommends using the relevant device located on the brake lever or
on the brake body (fi g. 5A/5B).
Wheels locking systems
For rear and front wheel locking, the Reparto Corse models feature
a system with quick-release or fi xed-locking hubs.
To remove a wheel with quick-release, simply open the relevant
lever positioned on the front fork ends (front wheel) or on the
dropouts (rear wheel). This allows quick and easy removal of the
wheel so that it can be carried, repaired or replaced.
To remove a wheel with fi xed locking, use the special tools (keys).
Bianchi reminds you that prior to removing the wheels (with the
exception of models equipped with disc brakes) the braking system
must be loosened: this procedure is illustrated in the previous
paragraph (Brakes).
To reassemble the wheel, position it between the dropouts,
making sure that the tyre does not touch the fork, the frame or the
brake pads. Bianchi invites you to make sure that all components
disassembled or loosened are put back in their original positions
(i.e. brakes locking). Finally, move the quick-release lever to its
original position to close it.
DANGER / SAFETY NORM:
Wheels incorrectly assembled or adjusted can lead to
dangerous falls and serious injury. Prior to using your new
Reparto Corse bicycles, always make sure the wheels are
properly tightened by lifting them up and exerting pressure
on them. The wheels should not move: if they do, make sure
that the locking levers are perfectly tightened and repeat
the operation.
Tyres
Tyres infl ated at the proper pressure make pedaling easier and grip
better. The recommended pressure values for the various Reparto
Corse models are printed on the side of each tyre.
Optical and acoustic signals
Your new Reparto Corse bicycle is accessorized with optical and
acoustic signals: Bianchi invites you to contact your trusted Dealer
for proper installation of these important safety devices.
DANGER / SAFETY NORM:
Using the bicycle in conditions of poor visibility can be
dangerous for your safety and the safety of others.
In case you ride your bicycle after sunset, at night or in foggy
conditions, Bianchi invites you to make sure it is equipped
with the necessary optical signaling devices.
MTB: Front / Full suspension models
Some Reparto Corse MTB models are equipped with suspensions
systems (front / rear). Should it be necessary to carry out
adjustments or maintenance on these components, Bianchi invites
you to read the relevant enclosed documentation and to contact
your specialist Dealer.
DANGER / SAFETY NORM:
By varying the arrangement and the adjustment of the suspension,
the stability, maneuverability and braking qualities of your new
Bianchi Reparto Corse bicycle are sure to change. Bianchi invites
you to carry out these adjustments in full compliance with the
relevant specifi c instructions. The installation of a suspension
system is compatible with only some Reparto Corse models. Before
you carry out any modifi cations to models not equipped with
suspension, Bianchi invites you to contact your specialist Dealer.
FIG 5BFIG 5AFIG 4
89

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bianchi 2021 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bianchi 2021 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 14.11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info