Handleiding Bestway 54113 Lay-Z-Spa - Monaco AirJet (pagina 6 van 12) (Engels)

686410

Verklein

Vergroot

Pagina terug

1/12

Pagina verder

SAFETY INSTRUCTIONS

When installing and using this electrical equipment, basic safety

precaution should always be followed, including the following:

IMPORTANT SAFETY INSTRUCTIONS - READ AND FOLLOW

ALL INSTRUCTIONS.

WARNING:

• The spa must be supplied through an isolating transformer or

supplied through a residual current device (RCD) having a rated

residual operating current not exceeding 30mA.

• The spa must be connected to a grounded mains supply socket

with a supply cord fitted with a plug and PRCD with a tripping current

of 10mA.

• The pump must be tested before each use, to test follow the

instruction of pump.

• If the supply cord is damaged, it must be replaced by the

manufacturer, service agent or similarly qualified persons in order to

avoid a hazard.

• To reduce the risk of electric shock, do not use extension cord to

connect unit to electric supply; provide a properly located outlet.

• No part of the appliance is to be located above the bath during use.

• Parts containing live parts, except parts supplied with safety

extra-low voltage not exceeding 12V, must be inaccessible to a

person in spa pool; Parts incorporating electrical components,

except remote control devices, must be located or fixed so that they

cannot fall into the spa pool.

• The spa must be supplied by earthed power source.

• Warning: Always keep plug dry, plug in with wet plug is

definitely forbidden!

• The plug shall be directly connected only to a socket-outlet of the

fixed electrical installation.

• It is necessary to have the plug accessible after installation of the

spa.

CAUTION: In order to avoid a hazard due to inadvertent resetting of

the thermal cut-out, this appliance must not be supplied through an

external switching device, such as a timer, or connected to a circuit

that is regularly switched on and off by the utility.

After using your spa for 3-5 years, you should contact your local

qualified maintenance technician to ensure the safety and

performance of the spa. The main components, such as heating

element, air blower motor and non-return valves within the electric

unit should be checked and replaced (if necessary) by professional

persons.

• TO AVOID ELECTRIC SHOCK, DO NOT USE THE SPA WHEN IT

IS RAINING,THUNDERING OR LIGHTNING.

• Never wear your contact lenses when in your spa.

• Do not use spa during chemical maintenance.

• Extension cords can’t be used.

• Don’t plug or unplug the appliance if hand is wet.

• Always unplug the appliance:

- before cleaning or other maintenance

- if leave it unattended on holidays

• When the appliance will be not used for a long time, such as in the

winter, the spa or pool set should be disassembled and stored

indoor.

• Caution: Read the instruction before using the appliance and

installation or reassemble every time.

• Safekeeping the instruction. If instruction is missed, please contact

with manufacturer or search it in website www.bestwaycorp.com

• Warning: For electric safety, a PRCD is incorporated in the

power cord, if the leakage current is detected more than 10mA,

the device will operate and cut-off the power supply, in such

case, please unplug and stop using the spa at once. Don’t reset

the product by yourself. And you must contact the local service

agent to check and repair the product.

• This appliance can be used by children aged from 8 years and above

and persons with reduced physical, sensory or mental capabilities or

lack of experience and knowledge if they have been given

supervision or instruction concerning use of the appliance in a safe

way and understand the hazards involved. Children shall not play

with the appliance. (For EU market)

• Cleaning and user maintenance must be performed by an adult

above18 years old who is familiar with the risk of electric shock.

This appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a person

responsible for their safety. Children should be supervised to ensure

that they do not play with the appliance. (For market other than EU)

• Water attracts children; always attach a spa cover after each use.

• Do not bury cord. Locate cord to minimize abuse from lawn mowers,

hedge trimmers, and other equipment.

• Risk of Accidental Drowning. Extreme caution must be exercised to

prevent unauthorized access by children. To avoid accidents, ensure

that children can not use this spa unless they are supervised at all

times.

• RISK OF INJURY. Never operate spa if inlet / outlet pipes are broken

or missing. Never attempt to replace the inlet / outlet pipes. Always

consult your local Aftersales centre.

• RISK OF ELECTRIC SHOCK. Install at least 2m from all metal

surfaces.

• RISK OF ELECTRIC SHOCK. Never operate any electrical

appliance when in your spa or when your body is wet. Never place

any electric appliance, such as a light, telephone, radio, or television,

within 2m of spa.

• During pregnancy, soaking in hot water may cause damage to the

fetus. Limit use to 10 minutes at a time.

• TO REDUCE THE RISK OF INJURY:

A. The water in a spa should never exceed 40°C (104°F). Water

temperature between 38°C (100°F) and 40°C (104°F) is

considered safe for a healthy adult. Lower water temperatures

are recommended for young children and when spa use exceeds

10 minutes.

B. Since excessive water temperatures have a high potential for

causing fetal damage during the early months of pregnancy,

pregnant or possibly pregnant women should limit spa water

temperature to 38°C (100°F).

C. Before entering a spa, the user should measure the water

temperature with an accurate thermometer since the tolerance of

water temperature regulating device varies.

D. The use of alcohol, drugs, or medication before or during spa use

may lead to unconsciousness with the possibility of drowning.

E. Obese persons and persons with a history of heart disease, low or

high blood pressure, circulatory system problems, or diabetes

should consult a physician before using a spa.

F. Persons using medication should consult a physician before using

a spa since some medication may induce drowsiness while other

medication may affect heart rate, blood pressure, and circulation.

• TO REDUCE THE RISK OF INJURY: Never pour water with a

temperature higher than 40°C (104°F) into the spa pool directly.

• The use of alcohol, drugs, or medication can greatly increase the risk

of fatal hyperthermia. Hyperthermia occurs when the internal

temperature of the body reaches a level that is several degrees

above the normal body temperature of 37°C (98.6°F). The symptoms

of hyperthermia include an increase in the internal temperature of

the body, dizziness, lethargy, drowsiness, and fainting. The effects of

hyperthermia include failure to perceive heat; failure to recognize the

need to exit spa or hot tub; unawareness of impending hazard; fetal

damage in pregnant women; physical inability to exit the spa or hot

tub; and unconsciousness resulting in the danger of drowning.

• Electric installations should follow national wiring rules, consult a

qualified electrician with any questions.

Be sure to cover the spa with the spa cover whenever the

heating function is activated. Leaving the spa uncovered will

increase the heating duration required.

Please do not use the spa when ambient temperature is

lower than 4ºC (39ºF).

Power Rate

Massage Tube Power

Heat Element Power

Water Pump Power

2,000W at 20ºC 50W

220-240V AC,

2,050W at 20ºC

800W

INSTALLATION

NOTE: Drawings for illustration purpose only. May not

reflect actual product. Not to scale.

1. Insert the plug.

2. Press the “RESET” button, the indicator light turns on.

3. Press the “TEST” button, the indicator light turns off.

4. Press the “RESET” button, the indicator light turns on.

5. Press the “On/Off” button for 2 seconds, your pump is ready to use.

6. After inserting the plug, when the indicator light turns on, press the “TEST” button directly.

WARNING: The PRCD plug must be tested before each use to avoid risk of electric shock.

WARNING: Before inserting plug into a power outlet, make sure the current rate of the power outlet is suitable for the pump.

WARNING: Do not use the pump if this test fails and contact our Customer Service.

PRCD Test

RESET

TEST

RESET

TEST

RESET

TEST

RESET

TEST

303021185661/14x21cm/54112; 54113; 54123; 54129; 54148; 54154; 54171; 54174; 54175; 54183; 54186/欧规AirJet SPA说明书/英

Selected Location

WARNING: The selected location has to be able to support

of supporting the expected load.

WARNING: An adequate drainage system has to be provided

to deal with overflow water for both indoor and outdoor

installations.

IMPORTANT: Because of the combined weight of the Lay-Z-Spa, water, and users, it is extremely important

that the base where the Lay-Z-Spa is installed is smooth, flat, level and capable of uniformly supporting the

weight for the entire time the Lay-Z-Spa is installed (not on the carpet or other similar material). If the

Lay-Z-Spa is placed on a surface, which does not meet these requirements, any damage caused by improper

support is not covered under the manufacturer’s warranty. It is the responsibility of the Lay-Z-Spa owner to

assure the integrity of the site at all times.

1. Indoor Installation:

Be aware of special requirements if you install the spa indoors.

• Humidity is a natural side effect with Lay-Z-Spa installation. Determine the effects of

airborne moisture on exposed wood, paper, etc. in the proposed location. To minimize these effects it is best to

provide plenty of ventilation to the selected area. An architect can help determine if more ventilation is needed.

2. Outdoor Installation:

• During filling, draining or when in use, water may flow out of the spa. Therefore the Lay-Z-Spa should be

installed near a floor drain.

• Do not leave the spa's surface exposed to direct sunlight for long periods of time.

To reach 40ºC (104ºF), the heating duration required is base on the starting water temperature and ambient

temperature, the data below is purely for reference. To display the current water temperature, run the filter

system for at least a minute.

Ambient Temperature

10ºC(50ºF)

15ºC(59ºF)

20ºC(68ºF)

25ºC(77ºF)

30ºC(86ºF)

Water Temperature

10ºC(50ºF)

15ºC(59ºF)

20ºC(68ºF)

25ºC(77ºF)

30ºC(86ºF)

Set Temperature

40ºC(104ºF)

Heating Duration

18.5 h

15 h

11.5 h

8.5 h

5.5 h

IMPORTANT !

Bestway 54113 Lay-Z-Spa - Monaco AirJet Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Bestway 54113 Lay-Z-Spa - Monaco AirJet

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info