42
06.2007 TR30G008 RE
Note:
There is a danger of locking yourself out if the finger-scan
(FL100/FLT100) is in the ex-factory setting.
5.6.13 Menu 44 - displaying/changing reader address
Only one reader may be connected to the report unit when performing
this function. The current address of the reader (e.g. “L1”) appears
after menu 44 is selected. The address is changed by pressing the
“P” button for 4 seconds. The new address will now be displayed
(e.g. “L2”). Briefly press the “P” button to return to the menu
display “nn”.
5.7 Initial operation of the second reader
The following steps must be done to connect a second reader to
the report unit:
1. Remove the first reader from the report unit.
2. Connect the second reader to the report unit.
3. Change the reader address from “L1” to “L2” via menu 44
(see Chapter 5.6.13).
4. Reconnect the first reader to the report unit.
5. Transfer the fingerprints from reader 1 to reader 2 using menu 40
(see Chapter 5.6.9).