779526
17
Verklein
Vergroot
Pagina terug
1/63
Pagina verder
ENGLISH ENGLISH
ROAD BIKE | OWNER’S MANUALOWNER’S MANUAL | ROAD BIKE
b ca e fd
| 32 3 3 |
Stems for threadless systems – Aheadse
In the case of BERGAMONT bikes with Aheadset® headsets the stem also serves
to adjust the bearing preload. If you change the position of the stem, you have to
readjust the bearing play (see the chapter “The headset on the BERGAMONT bike
and the manuals of the component manufacturers).
The vertical setting range is determined by the intermediate rings, also referred to as
spacers (b). In the case of flip-flop stem models the stem can be mounted the other
way round (c) to achieve a different handlebar height.
For modifications unscrew the bolt at the top of the fork steerer tube which serves
to adjust the initial bearing pressure, remove the Ahead cap and release the bolts
on either side of the stem by up to three turns (d). Remove stem and spacers from
the fork steerer tube. In doing so keep hold of both frame and fork to prevent the
fork from slipping off the head tube. You can determine the handlebar height by the
arrangement of stem and spacers. Slip the remaining spacers onto the fork steerer
tube above the stem. Adjust the headset, as described in the chapter “The headset
on the BERGAMONT bike“.
If you want to turn the stem around, you have to also release the bolts of the faceplate
securing the handlebars (e). If the stem is fitted with a cap, you can simply take
out the handlebars at this point. If it is not fitted with a cap, you have to remove the
handlebar fittings.
Mount the handlebars and, if necessary, the handlebar fittings, as described in the
chapter “Adjustment of handlebar tilt and brake lever/shifter units on BERGAMONT
road bikes and BERGAMONT cyclo-cross bikes” and/or in the manuals of the
component manufacturers.
Check after the adjustment or assembly, whether the handlebars are firmly seated
in the stem by trying to rotate the handlebars downwards (f). Verify whether the
handlebar/stem-combination can be turned relative to the fork. Do this by taking
the front wheel between your knees and trying to twist the handlebars. If there
is movement, carefully tighten the bolts a little more by using the torque wrench,
observe the maximum torque value and check again the proper fit.
Tighten carefully by approaching the prescribed maximum torque value in small steps (0.5
Nm increments) and check in between the proper fit of the component.
DANGER!
G
The stem is one of the load-bearing parts of your BERGAMONT bike. Changes to it
can impair your safety. If you are in doubt or if you have any questions, contact your
BERGAMONT dealer!
DANGER!
G
These routines require a certain amount of manual skill and (special) tools. Ask
your BERGAMONT dealer to explain you both function and adjustment of your
stem or let him do that work.
DANGER!
G
The bolted connections of stem and handlebars have to be tightened to the
prescribed torque values. If you disregard the prescribed values, the handlebars or
stem may come loose or break. Use a torque wrench and never exceed the maximum
torque values! You will find the prescribed values in the chapter “Recommended torque
settings for your BERGAMONT bike”, directly on the components and/or in the manuals
of the component manufacturers.
DANGER!
G
Stems come in varying lengths (a) as well as shaft and binder tube diameters. A
stem of inappropriate dimension can become a source of danger: Handlebars,
stems or forks can break, resulting in an accident. When replacing any parts be sure to
only use parts that bear the appropriate mark and, to be on the safe side, original spare
parts from BERGAMONT or SYNCROS. Your BERGAMONT dealer will be pleased to
help you.
CAUTION!
A
If you choose to use the product of another manufacturer, make sure it is
compatible with the BERGAMONT/SYNCROS components. BERGAMONT
assumes no responsibility for problems resulting from the use of non-BERGAMONT/
SYNCROS products. Make sure the handlebar/stem-combination is approved by the
handlebar and/or stem manufacturer.
CAUTION!
A
Make sure the handlebar clamping area is free of sharp edges.
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bergamont ROAD BIKE 2019 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bergamont ROAD BIKE 2019 in de taal/talen: Engels als bijlage per email.

De handleiding is 9.03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Bergamont ROAD BIKE 2019

Bergamont ROAD BIKE 2019 Gebruiksaanwijzing - Deutsch - 65 pagina's

Bergamont ROAD BIKE 2019 Gebruiksaanwijzing - Français - 64 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info