779501
31
Verklein
Vergroot
Pagina terug
1/87
Pagina verder
60 61
MTB-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2016 ORIGINAL OPERATING INSTRUCTIONS 2016 | MTB-PEDELEC
b ca e fd
ENGLISH
ENGLISH
Tighten the bolts evenly and in a cross pattern, i.e. alternately and gradually, to
the lower value of the recommended torque values using a torque wrench.
Once clamped in the stem try rotating the handlebars and tighten the bolt a
little more, if necessary. Use a torque wrench and never exceed the maximum
torque values! You find them directly on the components and/or in the manuals
of the component manufacturers on this BERGAMONT info CD. If the handle-
bars are not tight with the prescribed torque value, use carbon assembly paste.
After adjusting the handlebars you need to adjust the brake lever/shifter units.
Release the Allen bolt at either unit. Turn the levers relative to the handlebars.
Sit in the saddle and place your fingers on the brake levers.
Check whether the back of your hand forms a straight line with the line of your
forearm (f). Retighten the units with a torque wrench and do a twist test! The
brake levers need not be absolutely tight. In case of a fall it is an advantage
when the brake levers can be turned.
DANGER!
G
Tighten the bolts at the stem until the clamping slots between the stem
body and the faceplate are parallel and identical in width at the top and at
the bottom. Tighten the bolts evenly and in a cross pattern, i.e. alternately and
gradually, to the lower value of the recommended torque values using a torque
wrench.
DANGER!
G
Note that the bolted connections of the stem, handlebars, bar ends
and brakes have to be turned to their prescribed torque values. Use a
torque wrench and never exceed the maximum torque values! You will find
the prescribed values in the chapterRecommended torque settings for your
BERGAMONT bike”, directly on the components and/or in the manuals of the
component manufacturers on this BERGAMONT info CD.
Hydraulic brakes are also fitted with adjusting devices at the brake lever (a).
There are different systems. Ask your BERGAMONT dealer for advice or read
the manuals of the component manufacturers on this BERGAMONT info CD.
When adjusting the lever reach, make sure the first phalanx of the index finger
reaches around the brake lever (b). Check the proper adjustment and function-
ing of the brake system subsequently, as described in the chapter “Brakes” and
in the manuals of the component manufacturers on this BERGAMONT info CD.
DANGER!
G
Make sure your child cannot pull the brake levers all the way to the handle-
bars. Your maximum braking force must be reached short of this point.
NOTE!
I
In the case of hydraulic brakes and disc brakes follow the manual of the
brake manufacturer, which you can find on this BERGAMONT info CD. If you
are in doubt or if you have any questions, contact your BERGAMONT dealer.
Adjustment of handlebar tilt and brake levers on BERGAMONT
mountain bikes
The handlebars are usually slightly bent at the ends. Set the handlebars to a
position in which your wrists are relaxed and not turned outwards too much (c).
Release the Allen bolt(s) at the bottom or front side of the stem.
Turn the handlebars to the desired position.
Make sure the handlebars are accurately centred in the stem (d). Carefully
retighten the bolt(s) with the torque wrench. Make sure the upper and lower
clamping slots of the stem are parallel and identical in width (e).
31

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bergamont Pedelec 2016 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bergamont Pedelec 2016 in de taal/talen: Engels als bijlage per email.

De handleiding is 21.14 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info