779501
22
Verklein
Vergroot
Pagina terug
1/87
Pagina verder
42 43
MTB-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2016 ORIGINAL OPERATING INSTRUCTIONS 2016 | MTB-PEDELEC
b ca e fd
ENGLISH
ENGLISH
NOTE!
I
Before mounting or replacing a fork/wheel combination with thru-axle
system, be sure to read first the manuals of the respective fork or wheel
manufacturer on this BERGAMONT info CD. More information are also provided
at www.dtswiss.com
Maxle for RockShox
Wheel mounting
In the case of the Maxle thru-axle system for RockShox forks with quick-release
lever, insert the wheel from the front into the recess of the fork (a). Slide in the
brake disc into the brake calliper at the same time.
Make sure the wheel is positioned accurately in both recesses and that both
drop-outs are at the same height.
Insert the axle with the Maxle quick-release lever open into the hub until the axle
reaches the borehole of the thread (b).
Make sure the quick-release lever is fully open. When the axle thread engages
with the thread of the left fork leg, turn the axle clockwise (c). During the first
turns you should be able to turn the thru axle nearly without resistance.
Subsequently, turn the lever forcefully clockwise until the axle is hand-tight.
Finish by closing the Maxle quick-release lever like a usual quick-release lever. In
closed condition the quick-release lever must point to the rear (d); make sure it
does not stand out to the front or to the side.
Wheel removal
Open the quick-release lever fully.
Subsequently, turn the thru axle anticlockwise. Once the thru-axle thread is fully
disengaged from the thread, you can remove the thru axle completely.
NOTE!
i
More information are provided at www.rockshox.com
Manitou Hex Lock QR15 (e.g. Manitou Mattoc and Marvel)
The Manitou Hex Lock system can be adjusted without tools and locked with
a quarter turn after wheel mounting.
In contrast to the QR15-axle there is no need to unfold the lever and to
unscrew the axle with diculties. The only thing you have to do is to unfold
the quick-release lever, to move it by a quarter turn and the axle is free.
The special feature is located at one end of the axle: the two pins which are
designed to lock the axle in a respective guide in the drop-out.
Bring the front wheel into the right position between the drop-outs. Insert
the axle with the Hex Lock quick-release lever open from the right through
the drop-out and the hub (e). The marking on the axle must show towards
the fork crown, i.e. upwards. The hex must slide into the left fork leg.
Once the axle is fully inserted, turn the axle until the two pins engage. Close
the quick-release subsequently (f) by applying the force usually necessary
for closing a quick-release.
NOTE!
i
More information are provided at www.manitoumtb.com
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bergamont Pedelec 2016 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bergamont Pedelec 2016 in de taal/talen: Engels als bijlage per email.

De handleiding is 21.14 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info