784247
23
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
23
Operation
6006113_a – 01.06.2022
EN
4.6 Connecting the device to the extractor hood
The connection is possible for the following hoods:
yExtractor hoods with „Berbel Connect 2.0“ accessories.
yCeiling lift hoods with remote control.
The following steps must be carried out in parallel on the
hob and on the extractor hood.
Perform the following steps for the control panel supplied
with your extractor hood.
Extractor hoods with control panel “V8”
Press and hold both buttons at the
same time (> 3 sec.) to start the
connection process.
Both buttons flash for 2 minutes.
Extractor hoods with control panel “V7”
Press and hold both buttons at the
same time (> 3 sec.) to start the
connection process.
Both buttons flash for 2 minutes.
Ceiling lift hoods
The additional buttons are located under
the cover on the underside of the hood.
Press and hold the two additional
buttons at the same time (> 3 sec.),
to start the connection process.
Perform the following step on the hob if the buttons on the
extractor hood are flashing.
Switch on the hob.
Touch the symbol (> 5 sec.) to start
the connection process.
The dot above the symbol flashes for
2 minutes.
The devices are successfully connected when the symbols for
operating the extractor hood appear on the hob.
4.7 Operation of the extractor hood
To achieve an optimal efficiency in removing cooking fumes:
Turn the extractor hood on 1-2 minutes before you start
cooking. This allows the flow of air to build up, and the
fumes are removed at an early stage.
During the cooking process, switch to a power level that
is appropriate for the intensity of the cooking vapours.
If the intensity of the cooking vapours does not subside,
switch to a higher power level.
Switch to the power level setting when searing.
The “P” display flashes. After 6 minutes, the extractor
hood automatically switches back to power level 3.
To activate the power level setting permanently, the
corresponding button must be pushed again. In this
case the extractor hood does not switch back and the “P
display lights up.
Check the fresh air supply at regular intervals.
Also use the extractor hood to reduce other unpleasant
smells. Such as from:
yOnions and garlic
yOven, microwave and steamer
yFondue and raclette
Turn on the run-on function when you have finished
cooking.
Switch the extractor hood off after use. If the automatic
run-on function is activated, the run-on time (10 minutes)
starts in power level 1.
After 12 hours without operation, the extractor hood (incl.
lighting) automatically switches off.
Selecting additional functions is possible via the menu button.
Press the menu button.
yThe extraction changes the menu level.
yOnly the symbols of the functions available
in the respective menu level are displayed.
DThe functions are described in the
respective sections.
If no input is made, the operating group
changes back to menu level 1 after 2 seconds.
Every marking on the slider stands for the
function indicated by the symbol above the
marking.
Press the slider at the position below
the symbol to select the corresponding
function.
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Berbel BKF 90 iPP bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Berbel BKF 90 iPP in de taal/talen: Engels als bijlage per email.

De handleiding is 7.35 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Berbel BKF 90 iPP

Berbel BKF 90 iPP Gebruiksaanwijzing - Nederlands - 36 pagina's

Berbel BKF 90 iPP Gebruiksaanwijzing - Deutsch - 36 pagina's

Berbel BKF 90 iPP Gebruiksaanwijzing - Français - 36 pagina's

Berbel BKF 90 iPP Gebruiksaanwijzing - Italiano - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info