711311
11
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
EN
Mist Fan Use instructions
11
PRODUCT DESCRIPTION Fig.A
1. Nebulizing ring
2. Tube
3. Front grid
4. Grid closure hooks
5. Blade mounting ring
6. Blade
7. Rear grid xing ring
8. Rear grid
9. Motor unit
10. Control panel
ASSEMBLING THE FAN
To x the casters, turn the base upside down and insert the casters complete with plastic cap in the dedicated
holes. Note: it will not be possible to insert the casters without the plastic cap.
Fix the control panel structure to the base by screwing the xing nut placed under the base.
Place the rear grid in its housing and secure it by turning the rear grid xing ring clockwise.
Insert the blade and secure it by turning the blade mounting ring counter clockwise.
Place the front grid and rmly close it with the appropriate hooks and screw.
Connect the top tube by inserting it into the appropriate housing placed in front of the front grid. Open the front
part of the control panel structure by gently pulling towards you to remove the tank.
Take the water tank, turn it upside down and unscrew the cap placed at the bottom.
Fill the tank with water, close the cap and place it back to its position.
Important: Make sure that all components are rmly xed to the base in order to ensure a good stability
of the fan, otherwise the fan would oscillate dangerously
OPERATION BY CONTROL PANEL: Fig.B
When the assembly is complete, plug in the appliance.
The ON indicator turns blue.
The default operating mode of the fan is set on NORMAL mode and to WEAK speed (the indicators light up when
the fan is turned on).
By pushing the ON/SPEED button, the blade is activated and the desired fan speed is selected (based on your
setting, the blue LED indicator turns on: WEAK, MIDDLE or STRONG).
The OSCILLATION button activates the horizontal automatic oscillation of the head of the fan (the OSCILLA-
TION indicator turns blue on the panel). Oscillation allows even distribution of air ow through the environment.
To deactivate oscillation, just press the OSCILLATION button again (the LED indicator on the panel turns off).
The HUMIDIFIER button activates/deactivates water mist (the HUMIDIFIER indicator on the panel turns on/off).
!!!IMPORTANT!!! Before selecting water mist function, always make sure that the water tank is full.
The TIMER button allows to set the time of switching on/off of the fan.
To set the switching on of the fan, make sure that the fan is OFF but connected to the wall socket, and press
the TIMER button (the LED screen will show the time set, in hours). The TIMER is set with 1 hour progression,
up to 12 hours.
To set the switching off of the fan, press the TIMER button when the fan is ON (the LED screen will show the time
set, in hours). In this case also, the TIMER is set with 1 hour progression, up to 12 hours.
Press the OFF button to turn the fan off.
11. Motor unit xing screw
12. Water tank
13. Tank closure cap
14. Base
15. Fixing ring for base
16. Casters
17. Plastic cap for casters
18. Remote control
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Beper VE510 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Beper VE510 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 3,56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info