710407
11
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
EN
Thermoelectric refrigerator Use instructions
11
12. Do not use the appliance near inammable objects.
13. Do not place objects in the slots of the appliance.
DESCRIPTION OF THE ITEM Fig. 1
1. Temperature Adjustor
2.Light
3 Fan mask
4. Shelf
5. Grid grooves
6. Foot
7. Condensate collection tray
8. Ream cover
9. Opening handle
10. Compartment
11. Bottles compartment
12. Sealing gasket
13. Door
14. Power cord
FRIDGE SETTING
Remove all packing material and accessories. Examine the fridge to see that there are no damages. Do not
install the fridge if damaged.
Place on a at surface that provides enough space for ventilation. Leave a minimum free space of 5 cm for the
sides of the fridge and 10 cm for the back side.
The fridge is not designed for recessed use, because it needs to keep proper ventilation on its parts.
The fridge should not be used close to sources that produce heat or cold.
Do not climb over the fridge, avoid the bumps.
Do not use the fridge as a holder for objects or containers.
Do not open the fridge door frequently, especially when it is very hot; in any case close the door after a short
time after opening.
Do not use the fridge, exposing it to dangerous atmospheres due to its integrity, such as rain, wind, excess
moisture, chemicals, gas, sunlight, etc.
Do not introduce food or drinks that are too hot inside the refrigerator.
If the food or drinks extracted from the fridge have odor or strange color, it is advisable not to consume them,
they are probably out of date.
We recommend installing the fridge in a place where the temperature is between 10-26 ° C. If the room tempera-
ture is higher or lower than the recommended one, the performance of the appliance may be affected.
Climate class SN: room temperature + 10 ° C to + 32 ° C
Climate class N: room temperature from + 16 ° C to + 32 ° C
REVERSE THE DOOR
The fridge was assembled with the front door open from left to right. Fig.2
The door brackets are located on the right side of the fridge. Fig.3
If you want to change the way the door is opened, follow the steps below.
Empty the inside of the fridge completely from any food or drink. Disconnect the power cord from the electrical
outlet.
Two screwdrivers are needed, one with a cross head and one with a thin at head.
Remove the upper and lower covers of the brackets using the at head screwdriver, inserting it into the grooves
to lift them.
Using the cross-head screwdriver unscrew all the screws that hold the brackets securely and remove them. Be
careful not to drop the front door when it is disconnected.
1 - Do not overturn the fridge to remove the lower bracket.
2 - Replace the brackets on the other side of the fridge, securely fastening the screws and reinserting the covers
on the brackets. Fig.4
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Beper 90002 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Beper 90002 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 1,67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info