577840
4
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
Automatic measurement (Vo/c, Is/c, R
ISO
)
Attention:
Maximum DC power: P ≤ 10 kW, Vo/c ≤ 1000 V, Is/c ≤ 15 A
Do not make measurements at PV strings which are connected in parallel!
1. Connect the BENNING PV 1-1 to the PV generator as shown, by means of
the enclosed PV safety measuring leads and the red 4 mm safety test lead.
2. The open-circuit voltage (Vo/c) is automatically displayed.
3. In case of reversed polarity of the DC voltage, the symbol is displayed and
the measurement will be blocked.
4. Use the
V
ISO
-key to select 250 V, 500 V or 1000 V insulation test voltage.
5. Press the
Auto
-key to automatically measure short-circuit current (I
S/C
) and
insulation resistance (R
ISO
).
Note:
The red 4 mm safety measuring lead is required for the insulation resistance
measurement.
500V
250V 1000V
PV 1-1
DIN EN 62446 (VDE 0126-23), ÖVE/ÖNORM EN 62446
Auto
Ω
NULL
R
PE
V
ISO
ON/OFF
press 2 sec.
NULL
red redblack
Null balance of the measuring leads, resistance (R
PE
)
1. Connect the safety measuring leads to the red and black 4 mm test sockets of
the BENNING PV 1-1.
2. Hold the test probe tips together or connect together using the supplied
crocodile clips.
3. Press and hold the
Ω
NULL
-key until an acoustic signal sounds and the
Ω
NULL
-symbol
is displayed.
4. The Null-value is stored when unit is switched off.
5. To disable, press
Ω
NULL
-key until the
Ω
NULL
-symbol is removed from LC display.
Note:
Max. measuring lead resistance: 10 Ohm
500V
250V 1000V
PV 1-1
DIN EN 62446 (VDE 0126-23), ÖVE/ÖNORM EN 62446
Auto
Ω
NULL
R
PE
V
ISO
ON/OFF
press 2 sec.
NULL
red black
Protective conductor resistance (R
PE
)
1. Connect the 4 mm safety measuring leads as shown.
2. To make a single measurement (2 sec.), press and release the
R
PE
-
key.
3.
To make a continuous measurement, press and hold the
R
PE
-key until the symbol
is displayed continuously.
4. Press the
R
PE
-
key to terminate the continuous measurement.
500V
250V 1000V
PV 1-1
DIN EN 62446 (VDE 0126-23), ÖVE/ÖNORM EN 62446
Auto
Ω
NULL
R
PE
V
ISO
ON/OFF
press 2 sec.
NULL
R
PE
red
black
AC/DC current measurement
1. Disconnect all safety measuring leads from the BENNING PV 1-1.
2. Connect the BENNING CC 3 (option) current clamp adapter to the 4 mm test
sockets.
3. Select the 40 A range on the BENNING CC 3.
4. Press the null balance key (ZERO) of the BENNING CC 3 for approx. 2
seconds.
5. Press the
V
ISO
-key on the BENNING PV 1-1 until the symbol is
displayed.
6. The AC/DC current can be measured in single-wire live conductor.
500V
250V 1000V
PV 1-1
DIN EN 62446 (VDE 0126-23), ÖVE/ÖNORM EN 62446
Auto
Ω
NULL
R
PE
V
ISO
ON/OFF
press 2 sec.
+
40A : 10mV/A
300A : 1mV/A
BATT
LOW
PWR
ON
BENNING CC 3
ZERO A
OFF
40A
300A
CAT. III 600V
300A
NULL
AC/DC voltage measurement
1. Disconnect the PV safety measuring leads from the BENNING PV 1-1.
2. Connect the red and black safety measuring lead as pictured.
3. The BENNING PV 1-1 automatically measures the AC/DC voltage at the
measuring probes.
4. The polarity of the DC voltage is displayed by “+/-“. In case of AC voltage,
“+/-“ will be displayed alternately.
500V
250V 1000V
PV 1-1
DIN EN 62446 (VDE 0126-23), ÖVE/ÖNORM EN 62446
Auto
Ω
NULL
R
PE
V
ISO
ON/OFF
press 2 sec.
NULL
c
Max.
P ≤ 10 kW
Vo/c ≤ 1000 V
Is/c ≤ 15 A
Max.
CAT III 400 V
Option:
40 m measuring leads
BENNING TA 5
part no. 044039
Option:
BENNING CC 3
part no. 044038
PV-module/ -string
PV-module/ -string
09/ 2012
BENNING PV 1-1
309/ 2012
BENNING PV 1-1
2 09/ 2012
BENNING PV 1-1
4
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Benning PV 1.1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Benning PV 1.1 in de taal/talen: Nederlands, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 19,25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Benning PV 1.1

Benning PV 1.1 Gebruiksaanwijzing - Deutsch, English - 29 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info