577293
7
Verklein
Vergroot
Pagina terug
1/50
Pagina verder
03/2014
DUSPOL
®
analog
7
F
If the LC display shows the "R" symbol in both cases, the
earthing is too weak.
Note:
The phase sequence test can be carried out in an earthed
three-phase mains from 230 V - 900 V, 50 / 60 Hz (phase to
phase) on. Protective clothing and insulating conditions on site
might impair the function.
8. Technical data
- regulation: DIN EN 61243-3: 2011, IEC 61243-3: 2009
- nominal voltage range: 12 V to 1,000 V AC/DC
- nominal frequency range f: 0 to 60 Hz
- max. indication error: U
n
±15%, ELV U
n
+0% -15%
- internalresistanceofmeasuringcircuit:180kΩ,
- current consumption of measuring circuit: I
s
< 6,0 mA
(1,000 V)
- current consumption of load circuit: I
s
< 550 mA (1,000 V)
- polarity indication: + 24 V LED, - 24 V LED, + 12 V LED, -
12 V LED (with push-buttons being actuated)
- external conductor (phase indication) test and phase se-
quencetest:≥U
n
230 V, 50/ 60 Hz
- vibrationmotor,start:≥U
n
200 V
- overvoltage category: CAT IV 600 V, CAT III 1,000 V
- protection category: IP 65 (DIN VDE 0470-1 IEC/ EN
60529)
6 - first index: protection against access to dangerous
parts and protection against solid impurities, dustproof
5 - second index: protected against water jets. The device
can also be used in the rain.
-
max. allowable Duty cycle: 30 s (max. 30 seconds), 600 s off
- weight: approx. 250g
- length of connecting cable: approx. 1,000 mm
- operating temperature and storage temperature range:
- 20 °C to + 45 °C (climatic category N)
- relative air humidity: 20 % to 96 % (climatic category N)
- times of controlled reduction (thermal protection):
voltage/time: 230 V/30 s, 400 V/9 s, 690 V/5 s, 1000 V/2 s
9. General maintenance
Clean the exterior of the device with a clean dry cloth.
10. Environmental protection
Please lead the device at the end of its useful life to
the available return and collection systems.
Mode d'emploi
DUSPOL
®
analog
Avant d'utiliser le contrôleur de tension DUSPOL
®
analog :
Lisez le mode d'emploi et tenez impérativement compte des
consignes de sécurité !
Table des matières
1. Consignes de sécurité
2. Description de l’appareil
3. Contrôle de fonctionnement avant l'utilisation afin
d'assurer l'absence de tension d'une installation
4. Vérification de l'absence de tension d'une installation
5. Connexion de charge avec moteur à vibration
6.
Contrôle du conducteur extérieur ( indication de phase )
7. Test d'ordre de phases
8. Caractéristiques techniques
9. Entretien général
10. Protection de l’environnement
1. Consignes de sécurité :
- Lors de l’utilisation, ne touchez l’appareil qu’aux poignées
isolées L1
9
et L2
J
et ne touchez jamais les pointes
d'essai L1/-
2
et L2/+
3
!
- Contrôlez toujours le bon fonctionnement du contrôleur
de tension immédiatement avant et après de l'utiliser afin
d’assurer l’absence de tension de l’installation (voir para-
graphe 3)! Le contrôleur de tension ne doit être utilisé dès
lors qu'une ou plusieurs affichages ne fonctionnent plus
ou dès lors l'appareil n'est plus opérationnel ! Ensuite,
répétez ce contrôle au moyen d’un autre contrôleur de
tension.
- Le contrôleur de tension ne doit être utilisé que dans la
plage de tension nominale spécifiée et dans les installa-
tions électriques jusqu'à 1.000 V AC / DC !
- Le contrôleur de tension ne doit être utilisé que dans les
circuits électriques de la catégorie de surtension CAT III
avec un maximum de 1.000 V ou de la catégorie de sur-
tension CAT IV avec des conducteurs de 600 V max. par
rapport à la terre.
- Le contrôleur de tension est conçu afin d'être utilisé par
des électrotechniciens en combinaison avec des procé-
dés de travail sûrs.
- L'affichage de niveau par LED sert à indiquer la plage de
tension et n'est donc pas prévu afin d'effectuer des me-
sures.
- Création d'un testeur de tension pour tension de plus de
30 secondes (cycle d'utilisation maximal)
- Le contrôleur de tension ne doit être pas démonté !
- Protégez le contrôleur de tension contre les impuretés ain-
si que contre l'endommagement de la surface du boîtier.
- Comme protection contre les blessures, les pointes d'es-
sais doivent être munies du protecteur de pointe d'essai
ci-inclus
1
suite à l'utilisation du contrôleur de tension !
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Benning Duspol Analog bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Benning Duspol Analog in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 5,95 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info