693641
18
Verklein
Vergroot
Pagina terug
1/39
Pagina verder
18
Arrangement with 3 m feeder
3000 4836 2456 2374 226
Arrangement with 4 m feeder
4000 5821 3441 2374 52
φ 2500 mm
(4000 dm
3
)
Arrangement with 5 m feeder
5000 6806 4426 2374 -122
* Dimension "A" is specified by the client when ordering, based on the specific boiler room design.
4.2. Control and safety elements of the boiler
The control and regulation of the boiler is governed by a control unit - see separate instruction manual.
Safety components that monitor the safe operation of the boiler:
The emergency thermostat is used to prevent the system from overheating. The manufacturer sets
the thermostat at 95°C, i.e. at a higher temperature than can be set on the boiler. The emergency
thermostat is positioned on the rear wall of the boiler in the CLIMATIX control unit cabinet.
Thermal protection of the motor (thermal contact) is part of both fuel feeder motors and is used to
protect them from overheating in the case of fuel feeder blockage. It also retroactively stops the fan so
as to avoid burning of fuel in the container in the event of a fault. During normal operation, the motor
working temperature is up to 85 °C - such warming does not mean a failure.
The turnstile is a device that mechanically separates the fuel between the screw conveyors (feeding
from the bunker + feeding into the boiler). In the event of re-ignition of fuel in the boiler feeding (e.g.
during long term power outage) the fuel in the tank does not ignite. Furthermore, the turnstile serves as
a partial fuel crusher. In the event of a longer piece reaching the turnstile, the turnstile crushes it into
smaller pieces.
The cover limit switch of the bunker feeder shuts down the screw feeder and fan when the cover is
open. After proper closure both will return to normal operation.
The emergency fire extinguishing system is another security feature preventing burning of fuel
through to the container. A temperature increase above 95 °C at the feeding out of the bunker results in
a thermostatic valve opening and the space being cooled with cooling water from the water main.
The firing flap is located between the second and the third draft in the top part of the finned heat
exchanger and serves to regulate the flue gas temperature at the boiler outlet.
When operating the boiler when the flue gas temperature is higher than 100 °C the firing valve must be
closed, i.e. the firing flap lever on the side of the boiler must be rotated as much as possible upwards
(forwards) and secured with a locking screw. When firing (with cold chimney) or during long term
operation of the boiler at lower output it is recommended to operate the boiler with the firing valve
slightly open so that the flue gas temperature does not drop below 80 °C. In this case, the firing flap
lever must be rotated downward (backwards) and secured by a locking screw.
4.3. Boiler accessories
Standard accessories:
Operating instructions and installation manual which includes a warranty card
Operating instructions of the boiler control unit
List of contracted service organizations
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Benekov S51 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Benekov S51 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info