636957

BenQ XL2730Z Handleiding

50
Verklein
Vergroot
Pagina terug
1/57
Pagina verder
XL Series
User Manual
2
Copyright
Copyright © 2015 by BenQ Corporation. All rights reserved. No part of this publication may
be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any
language or computer language, in any form or by any means, electronic, mechanical, magnetic,
optical, chemical, manual or otherwise, without the prior written permission of BenQ
Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with
respect to the contents hereof and specifically disclaims any warranties, merchantability or
fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise this
publication and to make changes from time to time in the contents hereof without obligation of
BenQ Corporation to notify any person of such revision or changes.
The performance of flicker-free may be affected by external factors such as poor cable quality,
unstable power supply, signal interference, or poor grounding, and not limited to the above
mentioned external factors. (Applicable for flicker-free models only.)
Power Safety
• The AC plug isolates this equipment from the AC supply.
• The power supply cord serves as a power disconnect device for pluggable equipment. The
socket outlet should be installed near the equipment and be easily accessible.
• This product should be operated from the type of power indicated on the marked label. If you
are not sure of the type of power available, consult your dealer or local power company.
• An approved power cord greater or equal to H03VV-F or H05VV-F, 2G or 3G, 0.75mm
2
must
be used.
Care And Cleaning
• Cleaning. Always unplug your monitor from the wall outlet before cleaning. Clean the LCD
monitor surface with a lint-free, non-abrasive cloth. Avoid using any liquid, aerosol or glass
cleaners.
• Slots and openings on the back or top of the cabinet are for ventilation. They must not be
blocked or covered. Your monitor should never be placed near or over a radiator or heat
source, or in a built-in installation unless proper ventilation is provided.
• Never push objects or spill liquid of any kind into this product.
Please follow these safety instructions for best performance, and long life for your monitor.
3
Servicing
Do not attempt to service this product yourself, as opening or removing covers may expose
you to dangerous voltages or other risks. If any of the above mentioned misuse or other
accident such as dropping or mishandling occurs, contact qualified service personnel for
servicing.
BenQ ecoFACTS
BenQ has been dedicated to the design and development of greener product as part of its
aspiration to realize the ideal of the "Bringing Enjoyment 'N Quality to Life" corporate vision
with the ultimate goal to achieve a low-carbon society. Besides meeting international regulatory
requirement and standards pertaining to environmental management, BenQ has spared no
efforts in pushing our initiatives further to incorporate life cycle design in the aspects of
material selection, manufacturing, packaging, transportation, using and disposal of the products.
BenQ ecoFACTS label lists key eco-friendly design highlights of each product, hoping to ensure
that consumers make informed green choices at purchase. Check out BenQ's CSR Website at
http://csr.BenQ.com/ for more details on BenQ's environmental commitments and
achievements.
4
Table of Contents
Copyright ......................................................................................................................................2
Disclaimer .....................................................................................................................................2
Power Safety .................................................................................................................................2
Getting started .............................................................................................................................6
Getting to know your monitor ................................................................................................8
Front view.................................................................................................................................................... 8
Back view ..................................................................................................................................................... 8
Input and output ports.............................................................................................................................. 9
Connection ................................................................................................................................................ 10
How to assemble your monitor hardware ........................................................................ 12
How to detach the stand and the base ............................................................................................... 19
Adjusting the monitor height ................................................................................................................ 21
Viewing angle adjustment ....................................................................................................................... 22
Rotating the monitor .............................................................................................................................. 23
Using the monitor wall mounting kit ................................................................................................... 25
Getting the most from your BenQ monitor ...................................................................... 26
How to install the monitor on a new computer .............................................................................. 27
How to upgrade the monitor on an existing computer ................................................................. 28
How to install on Windows 10 system (selected models only) ................................................... 29
How to install on Windows 8 (8.1) system .......................................................................................30
How to install on Windows 7 system ................................................................................................ 31
How to adjust your monitor ................................................................................................. 32
The control panel..................................................................................................................................... 32
The S Switch .............................................................................................................................................. 33
Basic menu operation.............................................................................................................................. 34
Initial setup for playing games at 144 Hz ............................................................................................ 36
Picture optimization ................................................................................................................................ 38
Customizing the hot keys....................................................................................................................... 38
Setting up your own game mode ......................................................................................................... 38
Applying a suitable game mode automatically ................................................................................... 39
Downloading more game modes using Game Mode Loader ........................................................ 39
Adjusting display mode ........................................................................................................................... 40
Using Smart Scaling.................................................................................................................................. 40
Using Instant Mode.................................................................................................................................. 40
Activating VESA standard DisplayPort Adaptive-Sync (selected models only).......................... 40
Advanced control of your monitor from Display Pilot ................................................................... 41
Navigating the main menu ...................................................................................................... 42
Game Settings menu ............................................................................................................................... 43
Picture menu ............................................................................................................................................. 45
Display menu ............................................................................................................................................. 48
System menu ............................................................................................................................................. 51
Troubleshooting ........................................................................................................................55
Frequently asked questions (FAQ)....................................................................................................... 55
Need more help?...................................................................................................................................... 57
6 Getting started
Getting started
When unpacking please check you have the following items. If any are missing or damaged,
please contact the place of purchase for a replacement.
BenQ LCD Monitor
Monitor Stand
Monitor Base
S Switch (Swift Switch)
Quick Start Guide
CD-ROM
Power Cord
(Picture may differ from product supplied
for your region.)
7 Getting started
USB Cable
Video Cable: D-Sub
(Optional accessory)
Video Cable: DVI-D Dual Link
Video Cable: HDMI
(Optional accessory)
Video Cable: DP
(Optional accessory)
Protective cover
• Available accessories and the pictures shown here may differ from the actual contents and the product
supplied for your region. And the package contents may subject to change without prior notice. For cables
that are not supplied with your product, you can purchase them separately.
• Consider keeping the box and packaging in storage for use in the future when you may need to transport the
monitor. The fitted foam packing is ideal for protecting the monitor during transport.
Always keep the product and accessories out of reach of small children.
8 Getting to know your monitor
Getting to know your monitor
Front view
Back view
1. Control buttons
2. Power button
1
2
3. Handle
4. Input and output ports (vary by
model, see Input and output
ports on page 9)
5. Kensington lock slot
3
5
4
9 Getting to know your monitor
Input and output ports
Available input and output ports may vary depending on your purchased model. Check the
Specification document on the provided CD for details.
6. VESA mount release button
7. Headphone hook
8. USB port x 2 (downstream;
connecting to USB devices)
9. Headphone jack
10. Microphone jack
11. Cable management hole
8
9
6
7
10
11
• Above diagram may vary depending on the model.
• Picture may differ from the product supplied for your region.
XL2430 1. AC Power Input jack
2. Mic-In jack
3. S Switch socket
4. DisplayPort socket
5. D-Sub socket
6. DVI-D socket (*)
7. HDMI-2 (1.4) socket (*)
8. (XL2430) HDMI-1 (1.4) socket
(XL2730) HDMI-1 (2.0) socket (**)
9. USB port (upstream; connecting to
the PC)
XL2730
123456798
12367459
8
• *: (For XL2730Z) Supports up to 2560 x 1440 @ 60 Hz.
• **: (For XL2730Z) Supports up to 2560 x 1440 @ 144 Hz.
• HDMI-1 (2.0) only works with compatible graphic cards and devices.
Compatible issue may occur when the HDMI-1 (2.0) input port conducts with a HDMI 1.4 output port.
10 Getting to know your monitor
Connection
The following connection illustrations are for your reference only. For cables that are not
supplied with your product, you can purchase them separately.
For detailed connection methods, see page 14 - 17.
XL2430
11 Getting to know your monitor
XL2730
(HDMI 2.0)(HDMI 1.4)
12 How to assemble your monitor hardware
How to assemble your monitor hardware
• If the computer is turned on you must turn it off before continuing.
Do not plug-in or turn-on the power to the monitor until instructed to do so.
• The following illustrations are for your reference only. The location and available input and output jacks may
vary depending on the purchased model.
1. Attach the monitor base.
Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a
mouse will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping the monitor
around on your desk will scratch or damage the monitor surround and controls.
Protect the monitor and screen by clearing a flat
open area on your desk and placing a soft item like
the monitor packaging bag on the desk for padding.
Gently lay the screen face down on a flat clean
padded surface.
Orient and align the stand arm with the monitor
( ), push them together until they click and lock
into place ( ).
Orient and align the stand base socket with the end
of the stand arm. Make sure to align the arrow on
the end of the stand to the one on the monitor
base.
2
1
Open
Open
Lock
Lock
13 How to assemble your monitor hardware
Turn the base counterclockwise until you cannot
go further.
Raise the thumbscrew lid ( ) and tighten the
thumbscrew as illustrated ( ). Then push the lid
back.
Carefully put down the stand and the base.
Gently attempt to pull the stand and the base back
apart to check that they have properly engaged.
Carefully lift the monitor, turn it over and place it
upright on its stand on a flat even surface.
To move the monitor, you must hold the handle and the
bottom of the stand base at the same time as illustrated. You
can protect the monitor using the supplied protective cover.
Open
Open
Lock
L
ock
Open
Open
Lock
Lock
Lock
Lock
Open
Open
Lock
Lock
Lock
1
2
14 How to assemble your monitor hardware
You might want to adjust the monitor stand height.
See Adjusting the monitor height on page 21 for
more information.
You should position the monitor and angle the screen to
minimize unwanted reflections from other light sources.
2. Connect the PC video cable.
To Connect the D-Sub Cable
Connect the plug of the D-Sub cable (at the end
without the ferrite filter) to the monitor video
socket. Connect the other end of the cable (at the
end with the ferrite filter) to the computer video
socket.
Tighten all finger screws to prevent the plugs from
accidently falling out during use.
To Connect the DVI-D Dual Link Cable
Connect the plug of the DVI-D Dual Link cable to
the monitor video socket. Connect the other end of
the cable (at the end with the ferrite filter) to the
computer video socket.
Tighten all finger screws to prevent the plugs from
accidently falling out during use.
Either
Or
15 How to assemble your monitor hardware
To Connect the HDMI Cable
Connect the plug of the HDMI cable to the HDMI
port on the monitor. Connect the other end of the
cable to the HDMI port of a digital output device.
To Connect the DP Cable
Connect the plug of the DP cable to the monitor
video socket. Connect the other end of the cable to
the computer video socket.
If there is more than one video transmission method available
to you, you might want to take the picture quality of each
video cable into consideration before making the connection.
- Better quality: HDMI / DVI-D / DP
- Good quality: D-Sub
The video cables included in your package and the socket
illustrations on the right may vary depending on the product
supplied for your region.
3. Connect the S Switch to the monitor.
Connect the S Switch to the S Switch socket found
on the back of the monitor. And place the S Switch
properly on your monitor base.
Or
Or
16 How to assemble your monitor hardware
4. Connect the headset.
Connect the headphone connector of your headset
to the headphone jack found on the left side of the
monitor.
Connect the audio cable between the PC and the
monitor (via the Mic-In jack at the back). And then
connect your microphone connector on the
headset to the microphone jack at the left side of
the monitor.
The headphone jacks work only when the audio source is
HDMI or DisplayPort.
You may connect the headphones to the headphone jack
found on the left side of the monitor.
5. Using the headphone hook.
Push to release the headphone hook found on the
left side of the monitor ( ). And pull out the
headphone hook ( ).
Leave your headset on the headphone hook if
needed.
The maximum load capacity of the headphone hook is 400g.
1
2
17 How to assemble your monitor hardware
6. Connect USB devices.
Connect the USB cable between the PC and the
monitor (via the upstream USB port at the back).
This upstream USB port transmits data between
the PC and the USB devices connected to the
monitor.
Connect USB devices via other USB ports
(downstream) on the monitor. These downstream
USB ports transmit data between connected USB
devices and the upstream port.
See picture on the right.
7. Connect the power cable to the monitor.
Plug one end of the power cord into the socket
labelled on the rear of the monitor. Do not
connect the other end to a power outlet just yet.
8. Organize the cables.
9. Connect-to and turn-on the power.
Plug the other end of the power cord into a power
outlet and turn it on.
Picture may differ from product supplied for your region.
TV OUT
PD
IF-OUT
SDIF-OUT
18 How to assemble your monitor hardware
Turn on the monitor by pressing the power button
on the monitor.
Turn on the computer too, and follow the
instructions in Getting the most from your BenQ
monitor on page 26 to install the monitor
software.
To extend the service life of the product, we recommend
that you use your computer's power management function.
When the monitor is powered on, to prevent overheating,
do not cover the monitor with the supplied protective cover
or obstruct the ventilation holes.
19 How to assemble your monitor hardware
How to detach the stand and the base
1. Prepare the monitor and area.
Turn off the monitor and the power before
unplugging the power cable. Turn off the computer
before unplugging the monitor signal cable.
Protect the monitor and screen by clearing a flat
open area on your desk and placing a soft item like
a towel on the desk for padding, before laying the
screen face down on a flat clean padded surface.
Please be careful to prevent damage to the monitor. Placing
the screen surface on an object like a stapler or a mouse will
crack the glass or damage the LCD substrate voiding your
warranty. Sliding or scraping the monitor around on your
desk will scratch or damage the monitor surround and
controls.
2. Remove the monitor base.
Raise the thumbscrew lid ( ) and release the
thumbscrew as illustrated ( ).
Turn the base clockwise until you cannot go
further.
Open
Open
Lock
Lock
Lock
1
2
Open
Open
Lock
Lock
Open
Open
Lock
Lock
Lock
Lock
20 How to assemble your monitor hardware
And then detach the base from the stand.
Please handle the base carefully. Avoiding to take the base
from the adjustment scale, it may cause the damage.
3. Remove the monitor stand.
While pressing and holding the VESA mount
release button ( ), detach the stand from the
monitor ( and ).
Open
Open
Lock
Lock
2
3
1
21 How to assemble your monitor hardware
Adjusting the monitor height
1. To adjust the monitor height, hold both the left and
the right sides of the monitor to lower the monitor
or lift it up to the desired height.
2. On the monitor stand is an adjustment scale that
helps keep track of your preferred monitor height.
Move the marker on the scale to the monitor
stand height just set.
• Avoid placing hands on the upper or lower part of the
height-adjustable stand or at the bottom of the monitor, as
ascending or descending monitor might cause personal injuries.
Keep children out of reach of the monitor while performing this
operation.
• If the monitor has been rotated to portrait mode and height adjustment is desired, you
should be noted that the wide screen will keep the monitor from being lowered to its
minimum height.
22 How to assemble your monitor hardware
Viewing angle adjustment
You may position the screen to the desired angle with the monitor tilt, swivel, and height
adjustment functions. Refer to the product specifications for details.
Tilting the monitor
Swiveling the monitor
Tilt the monitor gently. The scale on top of the
column helps keep track of your preferred tilt angle.
1. Turn the monitor to the left or right as desired.
2. Turn the adjustment scale on the monitor base.
The interval of measurement is 10 degrees, and
you can make adjustment within the possible
swivel angle. Make sure to align the arrow on
the bottom of the stand with the one on the
scale. This helps to keep track of your preferred
swivel angle.
22
1
23 How to assemble your monitor hardware
Rotating the monitor
1. Pivot the display.
Before rotating the monitor with a portrait viewing orientation, the display has to be rotated 90
degrees.
To h ave t h e Auto Pivot function that sets the display to rotate with the monitor automatically,
please install the Display Pilot software from gaming.benq.com or CD. To enable, go to
System > Other Setting > Auto Pivot Sensor and select ON.
Alternatively, right-click the desktop and select Screen resolution from the popup menu. Select
Portrait in Orientation, and apply the setting.
Depending on the operating system on your PC, different procedures should be followed to adjust the screen
orientation. Refer to the help document of your operating system for details.
2. Fully extend the monitor and tilt it.
Gently lift the display up and extend it to the maximum
extended position. Then tilt the monitor.
The monitor should be vertically extended to allow to rotate
from landscape to portrait mode.
3. Rotate the monitor 90 degrees clockwise as
illustrated.
To avoid the edge of the LCD display hitting the monitor base
surface while it is being rotated, do tilt and extend the monitor
to the highest position before you start to rotate the display. You
should also make sure there are no obstacles around the monitor
and there is enough room for cables.
90
24 How to assemble your monitor hardware
4. Adjust the monitor to the desired viewing
angle. See Viewing angle adjustment on page 22
for more information.
25 How to assemble your monitor hardware
Using the monitor wall mounting kit
The back of your LCD monitor has a VESA standard mount with 100mm pattern, allowing the
installation of a wall mount bracket. Before starting to install a monitor wall mounting kit,
please read the precautions carefully.
Precautions
• Install your monitor and monitor mounting kit on a wall with flat surface.
• Ensure that the wall material and the standard wall mount bracket (purchased separately) are
stable enough to support the weight of the monitor. Refer to the product specifications for
weight information.
• Turn off the monitor and the power before disconnecting the cables from the LCD monitor.
The maximum dimensions of the VESA mounting bracket compatible with your monitor are 125mm x 125mm.
1. Remove the monitor stand.
Detach the monitor stand as instructed in How to
detach the stand and the base on page 19.
2. Remove the screws on the back cover.
Use a cross-pointed screwdriver to release the
screws on the back cover. The use of a
magnetic-head screwdriver is recommended to
avoid of losing the screws.
In case you intend to use your monitor on the stand in the
future, please keep the monitor base, monitor stand, and
screws somewhere safe for future use.
3. Follow the instruction manuals of the wall
mount bracket you purchased to complete
the installation.
Use four M4 x 10 mm screws to fix a VESA standard wall
mount bracket to the monitor. Make sure that all screws are
tightened and secured properly. Consult a professional
technician or BenQ service for wall mount installation and
safety precautions.
26 Getting the most from your BenQ monitor
Getting the most from your BenQ monitor
To gain the most benefit from your new BenQ color LCD flat screen monitor, you should install
the custom BenQ LCD Monitor driver software as provided on the BenQ LCD Monitor
CD-ROM.
The circumstances under which you connect and install your BenQ LCD Monitor will
determine which process you need to follow to successfully install the BenQ LCD Monitor
driver software. These circumstances relate to which version of Microsoft Windows you are
using, and whether you are connecting the monitor and installing the software onto a new
computer (without existing monitor driver software), or whether you are upgrading an existing
installation (which already has existing monitor driver software) with a newer monitor.
In either case however, the very next time you turn on your computer (after connecting the
monitor to your computer), Windows will automatically recognize the new (or different)
hardware, and will launch its
Found New Hardware wizard.
Follow the wizard instructions until it asks you to select a monitor model. At that point, click
the
Have Disk button, insert the BenQ LCD Monitor CD-ROM and select the appropriate
monitor model. Further details and step-by-step instructions for either an automatic (new) or
upgrade (existing) installation, see:
• How to install the monitor on a new computer on page 27.
• How to upgrade the monitor on an existing computer on page 28.
• If you require a User Name and Password to login to your Windows computer, you must be logged on as an
Administrator or as a member of the Administrators group in order to install the monitor driver software.
Furthermore, if your computer is connected to a network which has security access requirements, network
policy settings may prevent you from installing software on your computer.
• To check the name of the purchased model, refer to the specification label on the back of the monitor.
27 Getting the most from your BenQ monitor
How to install the monitor on a new computer
This instruction details the procedure for selecting and installing the BenQ LCD Monitor driver
software on a new computer which has never had a monitor driver installed before. This
instruction is only suitable for a computer which has never been used before, and for which the
BenQ LCD Monitor is the first ever monitor to be connected to it.
1. Follow the instructions in How to assemble your monitor hardware on page 12.
When Windows starts, it will automatically detect the new monitor and launch the Found
New Hardware Wizard
. Follow the prompts until it displays the option to Install
Hardware Device Drivers
.
2. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
3. Check
Search for a suitable driver for my device option, and click Next.
4. Check the option for CD-ROM drives (uncheck all others) and click Next.
5. Look to confirm that the wizard has selected the correct name of your monitor and click
Next.
6. Click Finish.
7. Restart the computer.
If you are adding the BenQ LCD Monitor to an existing computer that has already had another monitor
connected to it (and has monitor driver software installed), you should not be following these instructions. You
should instead be following the instructions for How to upgrade the monitor on an existing computer.
To find the suitable driver files for the purchased model, refer to the following table.
Driver files Suitable models
XL2430T XL2430T / XL2430TE
XL2730 XL2730Z / XL2730ZE
28 Getting the most from your BenQ monitor
How to upgrade the monitor on an existing computer
This instruction details the procedure for manually updating the existing monitor driver
software on your Microsoft Windows computer. It is currently tested as compatible for
Windows 10, Windows 8 (8.1), and Windows 7 Operating System (OS).
Installing monitor driver software involves selecting an appropriate information file (.inf) on the
BenQ LCD Monitor CD-ROM for the particular model monitor you have connected, and
letting Windows install the corresponding driver files from the CD. You need only steer it in the
right direction. Windows has an Upgrade Device Driver Wizard to automate the task and guide
you through the file selection and installation process.
See:
• How to install on Windows 10 system (selected models only) (see page 29)
• How to install on Windows 8 (8.1) system on page 30.
• How to install on Windows 7 system on page 31.
The BenQ LCD Monitor driver for your model may well function perfectly with other versions of Windows,
however, as at the time of writing, BenQ has done no testing of this driver on other versions of Windows and
cannot guarantee its operation on those systems.
29 Getting the most from your BenQ monitor
How to install on Windows 10 system (selected models only)
1. Open Display Properties.
Go to Start, Settings, Devices, Devices and Printers and right-click the name of your
monitor from the menu.
2. Select Properties from the menu.
3. Click the Hardware tab.
4. Click Generic PnP Monitor, and then the Properties button.
5. Click the Driver tab and the Update Driver button.
6. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
7. In the Update Driver Software window, select the option Browse my computer for
driver software
.
8. Click Browse and navigate to the following directory: d:\BenQ_LCD\Driver\ (where d is
the drive letter designator for the CD-ROM drive).
9. Select the correct folder name of your monitor from provided driver list, and click Next.
This will copy and install the appropriate monitor driver files to your computer.
10. Click Close.
You may be prompted to restart your computer after the driver update is complete.
The drive letter for your CD drive may differ from the example above depending upon your system - it may be
'D:' or 'E:' or 'F:' etc.
30 Getting the most from your BenQ monitor
How to install on Windows 8 (8.1) system
1. Open Display Properties.
Move the cursor to the lower-right of the screen or press the Windows + C buttons on the
keyboard to bring up the Charm bar. Go to Settings, Control Panel, Devices and
Printers
and right-click the name of your monitor from the menu.
Alternatively, right-click the desktop and select Personalize, Display, Devices and Printers,
and right-click the name of your monitor from the menu.
2. Select Properties from the menu.
3. Click the Hardware tab.
4. Click Generic PnP Monitor, and then the Properties button.
5. Click the Driver tab and the Update Driver button.
6. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
7. In the Update Driver Software window, select the option Browse my computer for
driver software
.
8. Click Browse and navigate to the following directory: d:\BenQ_LCD\Driver\ (where d is
the drive letter designator for the CD-ROM drive).
9. Select the correct folder name of your monitor from provided driver list, and click Next.
This will copy and install the appropriate monitor driver files to your computer.
10. Click Close.
You may be prompted to restart your computer after the driver update is complete.
The drive letter for your CD drive may differ from the example above depending upon your system - it may be
'D:' or 'E:' or 'F:' etc.
31 Getting the most from your BenQ monitor
How to install on Windows 7 system
1. Open Display Properties.
Go to Start, Control Panel, Hardware and Sound, Devices and Printers and right-click
the name of your monitor from the menu.
Alternatively, right-click the desktop and select Personalize, Display, Devices and
Printers
, and right-click the name of your monitor from the menu.
2. Select Properties from the menu.
3. Click the Hardware tab.
4. Click Generic PnP Monitor, and then the Properties button.
5. Click the Driver tab and the Update Driver button.
6. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
7. In the Update Driver Software window, select the option Browse my computer for
driver software
.
8. Click Browse and navigate to the following directory: d:\BenQ_LCD\Driver\ (where d is
the drive letter designator for the CD-ROM drive).
9. Select the correct folder name of your monitor from provided driver list, and click Next.
This will copy and install the appropriate monitor driver files to your computer.
10. Click Close.
You may be prompted to restart your computer after the driver update is complete.
The drive letter for your CD drive may differ from the example above depending upon your system - it may be
'D:' or 'E:' or 'F:' etc.
32 How to adjust your monitor
How to adjust your monitor
The control panel
All OSD (On Screen Display) menus can be accessed by the control keys.
No. Name Description
1. Control keys Accesses the functions or menu items displayed on the screen,
right next to each key.
2. Power key Turns the power on or off.
1
2
33 How to adjust your monitor
The S Switch
Apart from the control keys, S Switch also provides a quick way to control and access the OSD
menus.
You need to connect the S Switch to your monitor prior to use. Follow the instructions in Connect the S Switch
to the monitor. on page 15.
No. Name Function
1. Return button • Returns to the previous menu.
• Exits OSD menu.
• Press and hold for 5 seconds to switch to Standard (Picture
Mode
).
2. Wheel • For Increase/Decrease adjustment.
• Scrolls Up/Down in a menu.
• Selects menu item by pressing once.
3. Gamer 1
button
• Press to switch to Gamer 1 (Picture Mode).
• Press and hold for 5 seconds to save the customized display settings
for Gamer 1.
4. Gamer 2
button
• Press to switch to Gamer 2 (Picture Mode).
• Press and hold for 5 seconds to save the customized display settings
for Gamer 2.
5. Gamer 3
button
• Press to switch to Gamer 3 (Picture Mode).
• Press and hold for 5 seconds to save the customized display settings
for Gamer 3.
6. Auto Mode
button
Press to switch Auto Game Mode on or off.
To e n a b l e Auto Game Mode, see Applying a suitable game mode automatically
on page 39.
2
4
5
6
1
3
S Switch is designed for BenQ LCD Monitor XL30 series exclusively. Do not connect it to other devices with
USB ports.
34 How to adjust your monitor
Basic menu operation
You can use the OSD menu to adjust all the settings on your monitor.
1. Press any of the control keys. Alternatively, press the wheel or the return button on the
S Switch.
2. The hot key menu is displayed. The top three controls are custom keys and are designated
for particular functions.
3. Select
Menu to access the main menu.
4. In the main menu, follow the icons next to the control keys to make adjustments or
selection. See Navigating the main menu on page 42 for details on the menu options.
No.
OSD in hot key
menu
OSD icon
in main
menu
Function
Custom Key 1 • By default, the key is the hot key for Black eQualizer.
To change the default settings, see Customizing the
hot keys on page 38.
• For Up/Increase adjustment.
Black eQualizer
Blur Reduction
Picture Mode
Menu
Exit
Black eQualizer
Blur Reduction
Picture Mode
Menu
Exit
1 2
34
35 How to adjust your monitor
Custom Key 2 • By default, the key is the hot key for Blur Reduction
(Motion Blur Reduction). To change the default
settings, see Customizing the hot keys on page 38.
• For Down/Decrease adjustment.
Custom Key 3
/
• By default, the key is the hot key for Picture Mode. To
change the default settings, see Customizing the hot
keys on page 38.
• Enters sub menus.
• Selects menu items.
Menu • Activates the main menu.
• Returns to the previous menu.
Exit Exits OSD menu.
No.
OSD in hot key
menu
OSD icon
in main
menu
Function
• OSD = On Screen Display.
The hot keys only operate while the main menu is not currently displaying. Hot key displays will disappear after
a few seconds of no key activity.
• To unlock the OSD controls, press and hold any key for 10 seconds.
36 How to adjust your monitor
Initial setup for playing games at 144 Hz
You can optimize the monitor to enhance your gaming experience. You might want to start
with the following settings.
1. Set the screen refresh rate to 144 Hertz (144 Hz).
a. Right-click the desktop and select Screen resolution. Click Advanced settings. Under
the Monitor tab, change the screen refresh rate to 144 Hertz. And then click Apply and
Yes to confirm the change.
37 How to adjust your monitor
b. Go to the setup menu in your game, and change the frame rate or screen refresh rate to
144 Hz. Refer to the Help document that came with your game for details.
To check if the screen refresh rate has been changed, select Menu from the hotkey menu
on your monitor, and go to System and Information. The refresh rate in Current
Resolution
should be 144 Hz.
2. Select an appropriate game mode for your game. FPS is for FPS games, while RTS is for
RTS games. For more game modes, please download by Game Mode Loader. See
Downloading more game modes using Game Mode Loader on page 39.
3. Adjust the brightness of your display. See Brightness on page 46.
4. Adjust the brightness of the black shades by Black eQualizer. See Black eQualizer on page
44.
5. Adjust the monitor height. See Adjusting the monitor height on page 21.
Depending on the operating system on your PC, different procedures should be followed to adjust the screen
refresh rate. Refer to the Help document of your operating system for details.
If 144 Hz is not available in your menus, check the following:
• make sure the HDMI 2.0 cable or DisplayPort cable is properly connected to your computer and the monitor
• make sure your GPU supports 144 Hz
• make sure your game supports 144 Hz.
38 How to adjust your monitor
Picture optimization
The easiest way to obtain an optimal display from an analog (D-Sub) input is to use the Auto
Adjustment
function. Go to Display, Geometry, and Auto Adjustment to optimize the
currently displayed image to the screen.
If you wish, you can always adjust the screen geometric settings manually using geometry menu
items. To assist you in this endeavour, BenQ has provided a screen test image utility which you
can use to check for screen color, grayscale and line gradient display.
1. Run the test program auto.exe from CD-ROM. You could also use any other image, such as
the desktop of your operating system. However, we recommend that you use auto.exe. As
you run auto.exe, a test pattern displays.
2. Press any of the control keys, or the wheel, or the return button on the S Switch to bring
up the hot key menu. Select Menu to enter the main menu.
3. Go to Display, Geometry, and Auto Adjustment.
4. If you notice a vertical noise (like a curtain effect-shimmering of vertical lines), select Pixel
Clock
and adjust the monitor until the noise disappears.
5. If you notice a horizontal noise, select Phase and adjust the monitor until the noise
disappears.
Customizing the hot keys
The top 3 control keys (also called custom keys) perform as hot keys to provide direct access
to pre-defined functions. You can change the default setting and designate different functions for
these keys.
1. Press any of the control keys, or the wheel, or the return button on the S Switch to bring
up the hot key menu.
2. Select Menu to access the main menu.
3. Go to System and Custom Key.
4. Select the custom key you want to change.
5. In the sub menu, select a function that can be accessed by this key. A pop-up message will
appear, showing that the setup is complete.
Setting up your own game mode
There are several preset picture modes on your monitor that are suitable for games. To better
suit your needs, you can change and save the related display settings, and switch to your own
game mode easily.
1. Adjust the related available settings in different OSD menus.
The default picture mode is FPS1, which is designed for FPS games. If you prefer other picture modes, go to
Picture and change setting in Picture Mode.
When you connect a digital video output using a digital (DVI, HDMI, or DP) cable to your monitor, the Auto
Adjustment
function will be disabled, because the monitor will automatically display the best image.
Please ensure that the connected graphic card on your computer is set to the native resolution of the monitor
when you use the
Auto Adjustment function.
39 How to adjust your monitor
2. After all settings are done, go to Game Settings and Save Settings and save as one of
the game modes.
Alternatively, press and hold one of the game mode buttons (labeled 1~3) on S Switch to
save as one of the game modes.
3. If you want to switch to your game mode at any time, go to Picture and Picture Mode,
and select the game mode you saved in Step 2. Your preferred display settings will be
applied all at once.
Alternatively, press one of the game mode buttons (depending on your settings in Step 2)
on S Switch to switch to the desired game mode quickly.
Applying a suitable game mode automatically
Once the game modes have been set, you can choose to manually select a desired mode, or
use the Auto Game Mode function and wait for an appropriate mode to be applied
automatically.
Activating the Auto Game Mode function
1. Launch the Display Pilot software (installed from gaming.benq.com or CD if the software
is included).
2. Go to Game > Auto Game Mode and check to activate Auto Game Mode.
3. Set up appropriate game modes for specific games.
Once a game is launched, a suitable game mode would be applied depending on the type of the
game you are playing.
Disabling the Auto Game Mode function
To d i s a b l e t h e Auto Game Mode function, do one of the following:
• Press the Auto Mode button on the S Switch.
• Select OFF in Game Settings > Auto Game Mode on your monitor.
• Uncheck
Activate in Game > Auto Game Mode in Display Pilot.
Downloading more game modes using Game Mode Loader
Instead of customizing your own display settings, you can download the game modes through
the provided Display Pilot software and apply the settings directly.
1. Launch the Display Pilot software (installed from gaming.benq.com or CD if the software
is included).
2. Select Game > Game Mode Loader.
3. Click Check Now to check for new game modes.
BenQ offers more optimized game modes on the website. If you prefer to use these settings, refer to
Downloading more game modes using Game Mode Loader on page 39.
Do not disable Display Pilot if Auto Game Mode function is desired.
40 How to adjust your monitor
4. To apply the downloaded game modes, select one from the drop-down list, and click
Apply.
Adjusting display mode
To display images of aspect ratios other than your monitor aspect ratio and sizes other than
your display size, you can adjust the display mode on the monitor. For the aspect ratio and
display size of your monitor, see the specifications on the CD.
1. Press any of the control keys, or the wheel, or the return button on the S Switch to bring
up the hot key menu, and press Menu to access the main menu.
2. Go to
Display and Display Mode.
3. Select an appropriate display mode. The setting will take effect immediately.
Using Smart Scaling
You can resize your display by Smart Scaling.
1. Go to Display and Smart Scaling.
2. Adjust the value.
Using Instant Mode
While playing games, you can diminish the input lag by activating Instant Mode.
1. Go to Game Settings and Instant Mode.
2. Select On.
Activating VESA standard DisplayPort Adaptive-Sync (selected
models only)
Monitor featuring with the VESA standard Adaptive-Sync will eliminate screen tearing,
stuttering, and juddering during gaming.
1. Use a compatible graphics processing units (GPU) with the forthcoming driver. Confirm
supported technologies please visit www.AMD.com.
2. Ensure to connect with DisplayPort. See To Connect the DP Cable on page 15 for more
information.
Internet connection is required for this operation.
Switch to the desired display mode first, and follow the instructions in Using Smart Scaling on page 40 to adjust
the display size to precisely suit your needs.
• If one of the custom keys is preset for Smart Scaling, you can press the custom key and adjust the value
directly.
• Your display may become unstable temporarily when being resized. This is a normal phenomenon and should
not be considered as manufacturing defect.
• For more information on
Smart Scaling, go to Smart Scaling on page 50.
For any questions related to Adaptive-Sync performance please refer to www.AMD.com.
41 How to adjust your monitor
Advanced control of your monitor from Display Pilot
Your monitor can be enhanced with Display Pilot, a software that provides the basic control
of the display as well as the advanced settings and functions for gaming.
The Display Pilot software is available on gaming.benq.com or CD. Download and install the
software to enjoy the following main functions of Display Pilot. To find out more about the
software, go to System > Options > User Manual in the Display Pilot.
• Control of the OSD menus.
• Setup of Auto Game Mode. To enable Auto Game Mode, see Applying a suitable game mode
automatically on page 39.
• Export / import the color and game settings from your monitor to another compatible
gaming monitor. Go to Game > Game Mode To Go for operation.
• Access to mode game modes through Game Mode Loader. Go to Game > Game Mode
Loader
for operation.
Supported operating systems: Windows 7, Windows 8, and Windows 8.1.
42 Navigating the main menu
Navigating the main menu
You can use the OSD (On Screen Display) menu to adjust all the settings on your monitor.
Press any of the control keys, or the wheel, or the return button on the S Switch to bring up
the hot key menu. Select Menu to enter the main menu. See Basic menu operation on page 34
for details.
Available menu options may vary depending on the input sources, functions and settings. Menu
options that are not available will become grayed out. And keys that are not available will be
disabled and the corresponding OSD icons will disappear. For models without certain functions,
their settings and related items will not appear on the menu.
For more information on each menu, please refer to the following pages:
• Game Settings menu on page 43
• Picture menu on page 45
• Display menu on page 48
• System menu on page 51
The OSD menu languages may differ from the product supplied to your region, see Language on page 52 under
System and OSD Settings for more details.
43 Navigating the main menu
Game Settings menu
Available menu options may vary depending on the input sources, functions and settings. Menu
options that are not available will become grayed out. And keys that are not available will be
disabled and the corresponding OSD icons will disappear. For models without certain
functions, their settings and related items will not appear on the menu.
1. Select Menu from the hot key menu.
2. Use or to select Game Settings.
3. Select to go to a sub menu, and then use or to select a menu item.
4. Use or to make adjustments, or use to make selection.
5. To return to the previous menu, select .
6. To exit the menu, select .
Game Settings
Picture
Display
System
Mode: FPS1
Blur Reduction
Black eQualizer
Color Vibrance
Low Blue Light
Instanet Mode
Auto Game Mode
Save Settings
Off
On
Intensity
Area
44 Navigating the main menu
Item Function Range
Blur
Reduction
(Motion Blur
Reduction)
Reduces motion blur in games or during video playback.
Note the impacts of the Blur Reduction function once activated.
- Brightness is decreased.
- Flicker-free is disabled.
-
Blur Reduction is disabled when Adaptive-Sync variable
refresh rate is enabled.
OFF Disables motion blur reduction.
ON Enables motion blur reduction.
Intensity Enhances motion blur reduction.
The brightness of the display changes with the
intensity of Blur Reduction.
1 ~ 25
Area Decides where the best performance of
motion blur reduction is.
0 ~ 100
Black
eQualizer
Brings out the dark shades by increasing the brightness
without changing those of the light shades.
If the image is too bright or barely contains any dark shades,
adjusting the value of
Black eQualizer may not show much
change to the image.
0 ~ 20
Color
Vibrance
Provides different sets of color settings. Once applied, you
can adjust some of the color settings in the corresponding
menus.
0 ~ 20
Low Blue
Light
Decreases the blue light emitted from the display to
reduce the risk of blue light exposure to your eyes.
The higher the value is, the more blue light has been decreased.
0 ~ 10
Instant Mode Adjusts the image processing to diminish input lag. You can
have a real-time experience while playing games.
To optimize the picture quality, disable Instant Mode if the
source is interlaced video. To check the resolution of the video
source, go to
System and Information on the monitor.
• ON
• OFF
Auto Game
Mode
Enables Auto Game Mode function, which detects the
launched game and applies an appropriate game mode
automatically.
• ON
• OFF
Save
Settings
Saves a new set of customized display settings.
See Setting up your own game mode on page 38 for information
on applying the game mode.
• Gamer1
• Gamer2
•
Gamer3
45 Navigating the main menu
Picture menu
Available menu options may vary depending on the input sources, functions and settings. Menu
options that are not available will become grayed out. And keys that are not available will be
disabled and the corresponding OSD icons will disappear. For models without certain
functions, their settings and related items will not appear on the menu.
1. Select Menu from the hot key menu.
2. Use or to select Picture.
3. Select to go to a sub menu, and then use or to select a menu item.
4. Use or to make adjustments, or use to make selection.
5. To return to the previous menu, select .
6. To exit the menu, select .
Game Settings
Picture
Display
System
Mode: FPS1
Picture Mode
Brightness
Contrast
Sharpness
Gamma
Color Temperature
AMA
DynamicContrast
FPS1
FPS2
RTS
Gamer1
Gamer2
Gamer3
Movie
Standard
Item Function Range
Picture
Mode
Select a picture mode that best suits the type of images
shown on the screen.
The default setting is FPS1. Change the setting if needed.
FPS1 For playing FPS (First Person Shooting)
games.
FPS2
RTS For playing RTS (Real-time strategy) games.
Gamer1 Applies customized display settings.
For details on setting up a game mode, see
Setting up your own game mode on page 38.
Gamer2
Gamer3
Movie For viewing videos.
46 Navigating the main menu
Standard For basic PC application.
Brightness Adjusts the balance between light and dark shades. 0 to 100
Contrast Adjusts the degree of difference between darkness and
lightness.
0 to 100
Sharpness Adjusts the clarity and visibility of the edges of the subjects
in the image.
1 to 10
Gamma Adjusts the tone luminance. The default value is 3 (the
standard value for Windows).
• 1
• 2
• 3
• 4
• 5
Color
Temperature
Normal Allows video and still photographs to be
viewed with natural coloring. This is the
factory default color.
Bluish Applies a cool tint to the image and is factory
pre-set to the PC industry standard white
color.
Reddish Applies a warm tint to the image and is
factory pre-set to the news print standard
white color.
User
Define
The blend of the Red, Green and Blue
primary colors can be altered to change the
color tint of the image. Go to the succeeding
R (red), G (green), and B (blue) menus to
change the settings.
Decreasing one or more of the colors will
reduce their respective influence on the
color tint of the image. (e.g. if you reduce the
Blue level the image will gradually take on a
yellowish tint. If you reduce Green, the image
will become a magenta tint.)
•
R (0~100)
• G (0~100)
•
B (0~100)
AMA Improves the gray level response time of the LCD panel.
• OFF
• High
• Premium
Dynamic
Contrast
The function is to automatically detect the distribution of
an input visual signal, and then to create the optimal
contrast.
0 to 5
Item Function Range
47 Navigating the main menu
Senseye
Demo
Displays the preview of screen images under the selected
mode from Picture Mode. The screen will be divided into
two windows; the left window demonstrates images of
Standard mode, while the right window presents the
images under the specified mode.
• ON
• OFF
Reset Color Resets the custom color settings to the factory defaults. • YES
• NO
Item Function Range
48 Navigating the main menu
Display menu
Available menu options may vary depending on the input sources, functions and settings. Menu
options that are not available will become grayed out. And keys that are not available will be
disabled and the corresponding OSD icons will disappear. For models without certain functions,
their settings and related items will not appear on the menu.
1. Select Menu from the hot key menu.
2. Use or to select Display.
3. Select to go to a sub menu, and then use or to select a menu item.
4. Use or to make adjustments, or use to make selection.
5. To return to the previous menu, select .
6. To exit the menu, select .
Game Settings
Picture
Display
System
Mode: FPS1
Input
Display Mode
Smart Scaling
HDMI RGB Range
Overscan
Geometry
DVI
DisplayPort
HDMI 1
HDMI 2
D-Sub
Item Function Range
Input Use this to change the input to that appropriate to your
video cable connection type.
• DVI
• DisplayPort
• HDMI 1
• HDMI 2
• D-Sub
49 Navigating the main menu
Display
Mode
This feature is provided to allow aspect ratios other than
16:9 to be displayed without geometric distortion.
The options under Display Mode will be different depending on
the input signal sources.
(XL2430 only) When the input signal is at 144 Hz, only
Full is
available.
Depending on your selection of
Picture Mode, different Display
Mode
option is pre-set. Change the setting if needed.
Full Scales the input image to fill the screen. Ideal
for 16:9 aspect images.
Aspect The input image is displayed without
geometric distortion filling as much of the
display as possible.
1:1 Displays the input image in its native
resolution without scaling.
17" (4:3) Displays the input image as if on a 17"
monitor of 4:3 aspect ratio.
19" (4:3) Displays the input image as if on a 19"
monitor of 4:3 aspect ratio.
19" (5:4)
(XL2730
only)
Displays the input image as if on a 19"
monitor of 5:4 aspect ratio.
19"W
(16:10)
Displays the input image as if on a 19"W
monitor of 16:10 aspect ratio.
21.5" (16:9) Displays the input image as if on a 21.5"
monitor of 16:9 aspect ratio.
22"W
(16:10)
Displays the input image as if on a 22"W
monitor of 16:10 aspect ratio.
23"W (16:9) Displays the input image as if on a 23"W
monitor of 16:9 aspect ratio.
23.6"W
(16:9)
(XL2730
only)
Displays the input image as if on a 23.6"W
monitor of 16:9 aspect ratio.
24"W (16:9)
(XL2730
only)
Displays the input image as if on a 24"W
monitor of 16:9 aspect ratio.
Item Function Range
50 Navigating the main menu
Smart
Scaling
Adjusts the display size to best suit your needs.
Not available when the Display Mode is set to Full or Aspect.
For other modes (except
1:1), each mode with its last scaling
setting can be saved as quick access.
If the
Display Mode is 1:1 (and the resolution of the input source
is lower than 1920 x 1080), the last 3 scaling settings (in different
resolutions of the input source) will be saved for quick access.
0 ~ 100
HDMI RGB
PC Range
Determines the range of color scales. Select an option that
matches the RGB range setting on the connected HDMI
device.
• RGB (0 ~ 255)
• RGB (16 ~
235)
Overscan Slightly enlarges the input image. Use this feature to hide
annoying edge noise if present around your image.
Available only when the input source is HDMI, DP, or D-Sub (VGA
converted from Component).
• ON
• OFF
Geometry
Auto
Adjustment
Optimizes and adjusts the screen settings
automatically for you.
Not applicable to a digital input signal.
H. Position Adjusts the horizontal position of the screen
image.
0 to 100
V. Position Adjusts the vertical position of the screen
image.
0 to 100
Pixel Clock Adjusts the pixel clock frequency timing to
synchronize with the analog input video
signal.
See also: Picture optimization on page 38.
Not applicable to a digital input signal.
0 to 100
Phase
Adjusts the pixel clock phase timing to
synchronize with the analog input video
signal.
See also: Picture optimization on page 38.
Not applicable to a digital input signal.
0 to 63
Item Function Range
51 Navigating the main menu
System menu
Available menu options may vary depending on the input sources, functions and settings. Menu
options that are not available will become grayed out. And keys that are not available will be
disabled and the corresponding OSD icons will disappear. For models without certain
functions, their settings and related items will not appear on the menu.
1. Select Menu from the hot key menu.
2. Use or to select System.
3. Select to go to a sub menu, and then use or to select a menu item.
4. Use or to make adjustments, or use to make selection.
5. To return to the previous menu, select .
6. To exit the menu, select .
Mode: FPS1
5 Sec.
10 Sec.
15 Sec.
20 Sec.
25 Sec.
30 Sec.
Game Settings
Picture
Display
System
Headphone
OSD Settings
Custom Key 1
Custom Key 2
Custom Key 3
Information
Other Settings
Reset All
Language
Display Time
OSD Lock
Item Function Range
Headphone Volume Adjusts the audio volume. 0 ~ 100
Mute Mutes the audio input.
52 Navigating the main menu
OSD
Settings
Language Sets the OSD menu language.
The language options displayed on your OSD may
differ from those shown on the right, depending
on the product supplied in your region.
• English
• Français
• Deutsch
• Italiano
• Español
• Polski
• Česky
• Magyar
• Serbo-croatia
•
Română
• Nederlands
• Русский
• Svenska
• Português
• 日本語
•
繁體中文
• 简体中文
Display
Time
Adjusts the display time of the OSD menu. • 5 Sec.
• 10 Sec.
• 15 Sec.
• 20 Sec.
• 25 Sec.
• 30 Sec.
OSD Lock Prevents all the monitor settings from being
accidentally changed. When this function is
activated, the OSD controls and hotkey
operations will be disabled.
To unlock the OSD controls, press and hold any
key for 10 seconds.
Item Function Range
53 Navigating the main menu
Custom Key
Custom
Key 1
Sets the function to be accessed by custom
key 1.
• Black
eQualizer
• Blur
Reduction
• Color Vibrance
• Low Blue
Light
• Contrast
• Volume
•
Mute
• Input
• Brightness
• Picture Mode
• Display Mode
•
Auto Game
Mode
Custom
Key 2
Sets the function to be accessed by custom
key 2.
Custom
Key 3
Sets the function to be accessed by custom
key 3.
Information Displays the current monitor property settings.
• Model Name
• Input
• Current
Resolution
• Optimum
Resolution
(best with the
monitor)
Other
Setting
Resolution
Notice
Sets whether to display the resolution notice
of the recommended resolution when a new
input source is detected by the monitor.
• ON
• OFF
Buzzer
Turns the tone of control keys on or off. • ON
• OFF
Input Auto
Switch
Sets to automatically detect the available input
source.
• ON
• OFF
Auto Pivot
Sensor
Sets to rotate the display with the monitor. • ON
• OFF
Auto
Power Off
Sets the time to power off the monitor
automatically in power saving mode.
• OFF
• 10min.
• 20min.
• 30min.
Item Function Range
54 Navigating the main menu
LED
Indicator
Determines the brightness of the LED
indicator.
• OFF
• Medium
• High
DDC/CI Allows the monitor settings to be set through
the software on the PC.
DDC/CI, short for Display Data
Channel/Command Interface, which was developed by
Video Electronics Standards Association (VESA).
DDC/CI capability allows monitor controls to be sent
via the software for remote diagnostics.
• ON
• OFF
Reset All
Resets all mode, color and geometry settings to the factory
default values.
• YES
• NO
Item Function Range
55 Troubleshooting
Troubleshooting
Frequently asked questions (FAQ)
The image has a faulty coloration.
• The default Picture Mode is FPS1, which is designed for FPS games. If you prefer other
picture modes, go to Picture and change setting in Picture Mode.
• If the image has a yellow, blue or pink appearance, go to Picture and Reset Color, and then
choose YES to reset the color settings to the factory defaults.
If the image is still not correct and the OSD also has faulty coloration, this means one of the
three primary colors is missing in the signal input. Now check the signal cable connectors. If
any pin is bent or broken off, please contact your dealer to get necessary support.
The image is blurred.
• Read the instructions on the link "Adjusting the Screen Resolution" on the CD, and then
select the correct resolution, refresh rate and make adjustments based on these instructions.
• If a VGA extension cable is used, remove the extension cable for the test. Is the image now
in focus? If not, optimize the image by working through the instructions in the "Adjusting
the refresh rate"
section on the link "Adjusting the Screen Resolution". It is normal for
blurring to occur due to conduction losses in extension cables. You can minimize these
losses by using an extension cable with better conduction quality or with a built-in booster.
Does the blurring only occur at resolutions lower than the native (maximum) resolution?
Read the instructions on the link "Adjusting the Screen Resolution" on the CD. Select the
native resolution.
Pixel errors can be seen.
One of several pixels is permanently black, one or more pixels are permanently white, one or
more pixels are permanently red, green, blue or another color.
• Clean the LCD screen.
• Cycle power on-off.
• These are pixels that are permanently on or off and is a natural defect that occurs in LCD
technology.
56 Troubleshooting
The LED indicator is white or orange.
• If the LED lights up in solid white, the monitor is powered on.
• If the LED is illuminated in green and there is a message Out of Range on the screen, this
means you are using a display mode that this monitor does not support, please change the
setting to one of the supported mode. Please read the “Preset display modes” section
from the link "Adjusting the Screen Resolution".
• If the LED is illuminated in orange, the power management mode is active. Press any button
on the computer keyboard or move the mouse. If that does not help, check the signal cable
connectors. If any pin is bent or broken off, please contact your dealer to get necessary
support.
• If the LED is off, check the power supply mains socket, the external power supply and the
mains switch.
Faint shadow from the static image displayed is visible on the screen.
• Activate the power management function to let your computer and monitor go into a low
power "sleep" mode when not actively in use.
• Use a screensaver to prevent the occurrence of image retention.
The image is distorted, flashes or flickers.
Read the instructions on the link "Adjusting the Screen Resolution" on the CD, and then
select the correct resolution, refresh rate and make adjustments based on these instructions.
You are running the monitor at its native resolution, but the image is still distorted.
Images from different input sources may appear distorted or stretched on the monitor running
at its native resolution. To have the optimal display performance of each type of input sources,
you can use the
Display Mode function to set a proper aspect ratio for the input sources. See
Display Mode on page 49 for details.
The image is displaced in one direction.
Read the instructions on the link "Adjusting the Screen Resolution" on the CD, and then
select the correct resolution, refresh rate and make adjustments based on these instructions.
The OSD controls are inaccessible.
To unlock the OSD controls when it is preset to be locked, press and hold any key for 10
seconds.
No sound can be heard from the connected external speakers.
• Remove your headphone (if the headphone is connected to the monitor).
• Check whether the headphone jack is properly connected.
• If the external speakers are USB-powered, check whether the USB connection is OK.
• Increase the volume (volume may be muted or too low) on the external speakers.
57 Troubleshooting
Need more help?
If your problems remain after checking this manual, please contact your place of purchase or
e-mail us at: Support@BenQ.com.
… 50 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw BenQ XL2730Z bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van BenQ XL2730Z in de taal/talen: Engels als bijlage per email.

De handleiding is 9,51 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van BenQ XL2730Z

BenQ XL2730Z Gebruiksaanwijzing - Nederlands - 59 pagina's

BenQ XL2730Z Gebruiksaanwijzing - Deutsch - 61 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info