636001

BenQ G2251TM Handleiding

21
Verklein
Vergroot
Pagina terug
1/45
Pagina verder
LCD Monitor
User Manual
GL950A / GL950AM
G950A / G950AM
GL951A / GL951AM / G951A
G955A
GL2250 / GL2250M / GL2250HM / GL2250TM
G2250 / G2250HM
G2255A / G2255
G2251M / G2251TM
GL2450 / GL2450M / GL2450HM
G2450 / G2450HM
GL2750HM / G2750 / G2750HM
2
Copyright
Copyright 2011 by BenQ Corporation. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system or translated into any
language or computer language, in any form or by any means, electronic, mechanical, magnetic,
optical, chemical, manual or otherwise, without the prior written permission of BenQ
Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with
respect to the contents hereof and specifically disclaims any warranties, merchantability or
fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise this
publication and to make changes from time to time in the contents hereof without obligation of
BenQ Corporation to notify any person of such revision or changes.
Please follow these safety instructions for best performance, and long life for your
monitor.
Power Safety
• The AC plug isolates this equipment from the AC supply.
• The power supply cord serves as a power disconnect device for pluggable equipment. The
socket outlet should be installed near the equipment and be easily accessible.
• This product should be operated from the type of power indicated on the marked label. If you
are not sure of the type of power available, consult your dealer or local power company.
• An approved power cord greater or equal to H03VV-F or H05VV-F, 2G or 3G, 0.75mm2 must
be used.
Care And Cleaning
• Cleaning. Always unplug your monitor from the wall outlet before cleaning. Clean the LCD
monitor surface with a lint-free, non-abrasive cloth. Avoid using any liquid, aerosol or glass
cleaners.
• Slots and openings on the back or top of the cabinet are for ventilation. They must not be
blocked or covered. Your monitor should never be placed near or over a radiator or heat
source, or in a built-in installation unless proper ventilation is provided.
• Never push objects or spill liquid of any kind into this product.
Servicing
Do not attempt to service this product yourself, as opening or removing covers may expose
you to dangerous voltages or other risks. If any of the above mentioned misuse or other
accident such as dropping or mishandling occurs, contact qualified service personnel for
servicing.
3
BenQ ecoFACTS
BenQ has been dedicated to the design and development of greener product as part of its
aspiration to realize the ideal of the "Bringing Enjoyment 'N Quality to Life" corporate vision
with the ultimate goal to achieve a low-carbon society. Besides meeting international regulatory
requirement and standards pertaining to environmental management, BenQ has spared no
efforts in pushing our initiatives further to incorporate life cycle design in the aspects of
material selection, manufacturing, packaging, transportation, using and disposal of the products.
BenQ ecoFACTS label lists key eco-friendly design highlights of each product, hoping to ensure
that consumers make informed green choices at purchase. Check out BenQ's CSR Website at
http://csr.BenQ.com/ for more details on BenQ's environmental commitments and
achievements.
For
GL950A / GL950AM / GL951A / GL951AM /
GL2250 / GL2250M / GL2250HM / GL2250TM
/ GL2450 / GL2450M / GL2450HM /
GL2750HM
For
G950A / G950AM / G951A / G955A /
G2250 / G2250HM / G2255A / G2255 /
G2251M / G2251TM / G2450 / G2450HM /
G2750 / G2750HM
4
Table of Contents
Copyright ......................................................................................................................................2
Getting started .............................................................................................................................5
Getting to know your monitor ................................................................................................7
Front view .....................................................................................................................................................7
Back view ......................................................................................................................................................7
How to assemble your monitor hardware ...........................................................................9
How to detach the base ......................................................................................................................... 13
Using the monitor wall mounting kit ................................................................................................... 14
Getting the most from your BenQ monitor ...................................................................... 15
How to install the monitor on a new computer .............................................................................. 16
How to upgrade the monitor on an existing computer ................................................................. 18
How to install on Windows 7 system ................................................................................................ 19
How to install on Windows Vista systems ........................................................................................20
Picture optimization ................................................................................................................. 21
How to adjust your monitor ................................................................................................. 22
The control panel .................................................................................................................................... 22
Hot key mode ........................................................................................................................................... 23
Main menu mode ..................................................................................................................................... 24
Appendix: Assembling your monitor with a height adjustment stand (HAS) ............ 37
How to attach the monitor base ......................................................................................................... 37
How to detach the base ......................................................................................................................... 39
Adjusting the monitor height ................................................................................................................ 40
Rotating the monitor .............................................................................................................................. 41
Viewing angle adjustment ....................................................................................................................... 42
Using the monitor wall mounting kit ................................................................................................... 43
Troubleshooting ....................................................................................................................... 44
Frequently asked questions (FAQ) ...................................................................................................... 44
Need more help? ..................................................................................................................................... 45
5 Getting started
Getting started
When unpacking please check you have the following items. If any are missing or damaged,
please contact the place of purchase for a replacement.
BenQ LCD Monitor
Monitor Stand
(for models without height adjustment
stand)
Monitor Base
(for models without height adjustment
stand)
Monitor Base
(for models with height adjustment stand)
Quick Start Guide
CD-ROM
Power Cord
(Picture may differ from product supplied
for your region.)
6 Getting started
Video Cable: D-Sub
Video Cable: DVI-D
(Optional accessory for models with DVI
inputs, sold separately)
Video Cable: HDMI
(Optional accessory for models with HDMI
inputs, sold separately)
Audio Cable
(Optional accessory for models with
speakers)
Consider keeping the box and packaging in storage for use in the future when you may need to transport the
monitor. The fitted foam packing is ideal for protecting the monitor during transport.
Always keep the product and accessories out of reach of small children.
7 Getting to know your monitor
Getting to know your monitor
Front view
Back view
1. Control buttons
2. Power button
1
2
3. Speakers (for models with speakers)
4. Input and output ports (vary by model,
see Input and output ports on page 8)
5. Kensington lock slot
33
5
4
• Above diagram may vary depending on the model.
• Picture may differ from product supplied for your region.
8 Getting to know your monitor
Input and output ports
Available input and output ports may vary depending on your purchased model.
Models with HDMI inputs 1. AC power input jack
2. Audio Line In
3. Headphone jack
4. HDMI socket
5. DVI-D socket
6. D-Sub socket
Models with dual inputs and speakers
Models with analog-only inputs and speakers
Models with dual inputs
Models with analog-only inputs
123456
123 5 6
123 6
156
16
9 How to assemble your monitor hardware
How to assemble your monitor hardware
• If your model came with a height adjustment stand (HAS), refer to Appendix: Assembling your monitor with a
height adjustment stand (HAS) on page 37 for details on hardware installation.
• If the computer is turned on you must turn it off before continuing.
Do not plug-in or turn-on the power to the monitor until instructed to do so.
• The following illustrations are for your reference only. Available input and output jacks may vary depending on
the purchased model.
1. Attach the monitor base.
Please be careful to prevent damage to the monitor. Placing
the screen surface on an object like a stapler or a mouse will
crack the glass or damage the LCD substrate voiding your
warranty. Sliding or scraping the monitor around on your
desk will scratch or damage the monitor surround and
controls.
Protect the monitor and screen by clearing a flat open
area on your desk and placing a soft item like the
monitor packaging bag on the desk for padding.
Gently lay the screen face down on a flat clean padded
surface.
Attach the monitor stand to the monitor base as
illustrated until it locks in place.
Gently attempt to pull them back apart to check that
they have properly engaged.
Orient and align the stand arm with the monitor, then
push them together until they click and lock into place.
10 How to assemble your monitor hardware
If the screen size is 27 inches, follow the illustrations on the
right to attach the monitor stand and the base.
Gently attempt to pull them back apart to check that
they have properly engaged.
You should position the monitor and angle the screen to
minimize unwanted reflections from other light sources.
3
5
4
-5
O
~ +15
O
-5
O
~ +15
O
11 How to assemble your monitor hardware
2. Connect the video cable
Do not use both DVI-D cable and D-Sub cable on the same
PC. The only case in which both cables can be used is if they
are connected to two different PCs with appropriate video
systems. (Not available for analog-only models).
To Connect the D-Sub Cable
Connect the plug of the D-Sub cable (at the end
without the ferrite filter) to the monitor video socket.
Connect the other end of the cable (at the end with the
ferrite filter) to the computer video socket.
Tighten all finger screws to prevent the plugs from
accidently falling out during use.
To Connect the DVI-D Cable
Connect the plug of the DVI-D cable (at the end without
the ferrite filter) to the monitor video socket. Connect
the other end of the cable (at the end with the ferrite
filter) to the computer video socket.
Tighten all finger screws to prevent the plugs from
accidently falling out during use.
To Connect the HDMI Cable
Connect the plug of the HDMI cable to one of the two
HDMI ports on the monitor. Connect the other end of
the cable to the HDMI port of a digital output device.
If there is more than one video transmission method available
to you, you might want to take the picture quality of each
video cable into consideration before making the connection.
- Better quality: HDMI / DVI-D
- Good quality: D-Sub
The video cables included in your package and the socket
illustrations on the right may vary depending on the product
supplied for your region.
3. Connect the audio cable (for models with
speakers).
Connect the audio cable between the socket on the
rear of the monitor (Line In) and your computer audio
outlet.
Either
Or
Or
12 How to assemble your monitor hardware
You may connect headphones to the headphone jack
found next to the Line In jack of the monitor.
Location of the Line In and headphone jacks may vary by
model. Check Input and output ports on page 8 for details.
4. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled
on the rear of the monitor. Do not connect the
other end to a power outlet just yet.
5. Connect-to and turn-on the power.
Plug the other end of the power cord into a power
outlet and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power button on
the right of the monitor.
Turn on the computer too, and follow the instructions
in Getting the most from your BenQ monitor on page
15 to install the monitor software.
To extend the service life of the product, we recommend that
you use your computer's power management function.
13 How to assemble your monitor hardware
How to detach the base
1. Prepare the monitor and area.
Turn off the monitor and the power before unplugging
the power cable. Turn off the computer before
unplugging the monitor signal cable.
Protect the monitor and screen by clearing a flat open
area on your desk and placing a soft item like a towel on
the desk for padding, before laying the screen face down
on a flat clean padded surface.
Please be careful to prevent damage to the monitor. Placing
the screen surface on an object like a stapler or a mouse will
crack the glass or damage the LCD substrate voiding your
warranty. Sliding or scraping the monitor around on your
desk will scratch or damage the monitor surround and
controls.
2. Push the locking clips upward to detach the
monitor base from the monitor stand arm.
While pushing the locking clips upward, detach the
stand base from the stand arm.
3. Remove the monitor stand.
Insert a pointed object such as a screwdriver to the
hole above the monitor stand arm, and then push the
screwdriver against the release button inside the hole.
Then pull the monitor stand backward away from the
monitor.
If the screen size is 27 inches, follow the illustration on the
right to detach the monitor base.
1
2
1
2
1
2
3
14 How to assemble your monitor hardware
Using the monitor wall mounting kit
The back of your LCD monitor has a VESA standard mount with 100mm pattern, allowing the
installation of a wall mount bracket. Before starting to install a monitor wall mounting kit,
please read the precautions carefully.
Precautions:
• Install your monitor and monitor mounting kit on a wall with flat surface.
• Ensure that the wall material is stable to support the weight of the monitor.
• Turn off the monitor and the power before disconnecting the cables from the LCD monitor.
1. Remove the monitor base.
Lay the screen face down on a clean and well-padded
surface.
Detach the monitor base as instructed in How to
detach the base on page 13.
If the screen size is 27 inches, follow the illustration on the
right to detach the monitor stand.
In case you intend to use your monitor on the stand in the
future, please keep the monitor base, monitor stand, and
screws somewhere safe for future use.
2. Follow the instruction manuals of the wall
mount bracket you purchased to complete
the installation.
1
2
1
2
15 Getting the most from your BenQ monitor
Getting the most from your BenQ monitor
To gain the most benefit from your new BenQ LCD monitor, you should install the custom
BenQ LCD Monitor driver software as provided on the BenQ LCD Monitor CD-ROM.
The circumstances under which you connect and install your BenQ LCD Monitor will
determine which process you need to follow to successfully install the BenQ LCD Monitor
driver software. These circumstances relate to which version of Microsoft Windows you are
using, and whether you are connecting the monitor and installing the software onto a new
computer (without existing monitor driver software), or whether you are upgrading an existing
installation (which already has existing monitor driver software) with a newer monitor.
In either case however, the very next time you turn on your computer (after connecting the
monitor to your computer), Windows will automatically recognize the new (or different)
hardware, and will launch its
Found New Hardware wizard.
Follow the wizard instructions until it asks you to select a monitor model. At that point, click
the
Have Disk button, insert the BenQ LCD Monitor CD-ROM and select the appropriate
monitor model. Further details and step-by-step instructions for either an automatic (new) or
upgrade (existing) installation, see:
• How to install the monitor on a new computer on page 16.
• How to upgrade the monitor on an existing computer on page 18.
• If you require a User Name and Password to login to your Windows computer, you must be logged on as an
Administrator or as a member of the Administrators group in order to install the monitor driver software.
Furthermore, if your computer is connected to a network which has security access requirements, network
policy settings may prevent you from installing software on your computer.
• To check the name of the purchased model, refer to the specification label on the back of the monitor.
16 Getting the most from your BenQ monitor
How to install the monitor on a new computer
This instruction details the procedure for selecting and installing the BenQ LCD Monitor driver
software on a new computer which has never had a monitor driver installed before. This
instruction is only suitable for a computer which has never been used before, and for which the
BenQ LCD Monitor is the first ever monitor to be connected to it.
1. Follow the instructions in How to assemble your monitor hardware on page 9.
When Windows starts, it will automatically detect the new monitor and launch the Found New
Hardware Wizard. Follow the prompts until it displays the option to Install Hardware Device
Drivers.
2. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
3. Check Search for a suitable driver for my device option, and click Next.
4. Check the option for CD-ROM drives (uncheck all others) and click
Next.
5. Look to confirm that the wizard has selected the correct name of your monitor and click
Next.
6. Click Finish.
7. Restart the computer.
If you are adding the BenQ LCD Monitor to an existing computer that has already had another monitor
connected to it (and has monitor driver software installed), you should not be following these instructions. You
should instead be following the instructions for How to upgrade the monitor on an existing computer.
To find the suitable driver files for the purchased model, refer to the following table.
Driver files Suitable models
GL950A GL950A / GL950AM
G950A G950A / G950AM
GL951A GL951A / GL951AM
G951A G951A
G955A G955A
GL2250 GL2250 / GL2250M / GL2250TM
GL2250H GL2250HM
G2250 G2250
G2250H G2250HM
G2251 G2251M / G2251TM
G2255A G2255A
G2255 G2255
GL2450 GL2450 / GL2450M
GL2450H GL2450HM
G2450 G2450
G2450H G2450HM
17 Getting the most from your BenQ monitor
GL2750H GL2750HM
G2750 G2750
G2750H G2750HM
Driver files Suitable models
18 Getting the most from your BenQ monitor
How to upgrade the monitor on an existing computer
This instruction details the procedure for manually updating the existing monitor driver
software on your Microsoft Windows computer. It is currently tested as compatible for
Windows Vista and Windows 7 Operating System (OS).
Installing monitor driver software involves selecting an appropriate information file (.inf) on the
BenQ LCD Monitor CD-ROM for the particular model monitor you have connected, and
letting Windows install the corresponding driver files from the CD. You need only steer it in the
right direction. Windows has an Upgrade Device Driver Wizard to automate the task and guide
you through the file selection and installation process.
See:
• How to install on Windows 7 system on page 19.
• How to install on Windows Vista systems on page 20.
The BenQ LCD Monitor driver for your model may well function perfectly with other versions of Windows,
however, as at the time of writing, BenQ has done no testing of this driver on other versions of Windows and
cannot guarantee its operation on those systems.
19 Getting the most from your BenQ monitor
How to install on Windows 7 system
1. Open Display Properties.
Go to Start, Control Panel, Hardware and Sound, Devices and Printers and right-click the
name of your monitor from the menu.
Alternatively, right-click the desktop and select Personalize, Display, Devices and Printers,
and right-click the name of your monitor from the menu.
2. Select Properties from the menu.
3. Click the Hardware tab.
4. Click Generic PnP Monitor, and then the Properties button.
5. Click the Driver tab and the Update Driver button.
6. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
7. In the
Update Driver Software window, select the option Browse my computer for
driver software
.
8. Click Browse and navigate to the following directory: d:\BenQ_LCD\Driver\ (where d is
the drive letter designator for the CD-ROM drive).
9. Select the correct folder name of your monitor from provided driver list, and click Next.
This will copy and install the appropriate monitor driver files to your computer.
10. Click Close.
You may be prompted to restart your computer after the driver update is complete.
The drive letter for your CD drive may differ from the example above depending upon your system - it may be
'D:' or 'E:' or 'F:' etc.
20 Getting the most from your BenQ monitor
How to install on Windows Vista systems
1. Open Display Settings.
Right-click the desktop and select Personalize from the popup menu.
Select Display Settings from the Personalize appearance and sounds window.
The Display Settings window will display.
2. Click the Advanced Settings button.
The Generic PnP Monitor Properties window will display.
3. Click the Monitor tab and the Properties button.
4. Click Continue in the prompted User Account Control window.
5. Click the
Driver tab and the Update Driver button.
6. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
7. In the
Update Driver Software window, select the option Browse my computer for
driver software
.
8. Click
Browse and navigate to the following directory: d:\BenQ_LCD\Driver\ (where d is
the drive letter designator for the CD-ROM drive).
9. Select the correct folder name of your monitor from provided driver list, and click Next.
This will copy and install the appropriate monitor driver files to your computer.
10. Click Close.
You may be prompted to restart your computer after the driver update is complete.
The drive letter for your CD drive may differ from the example above depending upon your system – it may be
‘D:’ or ‘E:’ or ‘F:’ etc.
21 Picture optimization
Picture optimization
The easiest way to obtain an optimal display from an analog (D-Sub) input is to use the AUTO
key function. Press the AUTO key to optimize the currently displayed image to the screen.
If you wish, you can always adjust the screen geometric settings manually using geometry menu
items. To assist you in this endeavour, BenQ has provided a screen test image utility which you
can use to check for screen color, grayscale and line gradient display.
1. Run the test program auto.exe from CD-ROM. You could also use any other image, such as
the desktop of your operating system. However, we recommend that you use auto.exe. As
you run auto.exe, a test pattern displays.
2. Press the AUTO key on the monitor.
3. Press the MENU key to access the monitor On-Screen Display (OSD) menu.
4. Use the or keys to select DISPLAY and press the ENTER key to enter the menu.
5. If you notice a vertical noise (like a curtain effect-shimmering of vertical lines), press the
or keys to select Pixel Clock and press the ENTER key. Then press the or
keys to adjust the monitor until the noise disappears.
6. If you notice a horizontal noise, press the or keys to select Phase and press the
ENTER key. Then press the or keys to adjust the monitor until the noise
disappears.
When you connect a digital video output using a digital (DVI or HDMI) cable to your monitor, the AUTO key and
the Auto Adjustment function will be disabled, because the monitor will automatically display the best image.
Please ensure that the connected graphic card on your computer is set to the native resolution of the monitor
when you use the
AUTO key function.
22 How to adjust your monitor
How to adjust your monitor
The control panel
1. AUTO: Adjusts vertical position, phase, horizontal position and pixel clock automatically.
2. MENU key: Activates OSD main menu and return to the previous menu or exit OSD.
3. /Display Mode key (for models without speakers): For Up/Increase adjustment. The key
is the hot key for Display Mode.
/Volume key (for models with speakers): For Up/Increase adjustment. The key is the
hot key for Volume.
4. /Mode key: For Down/Decrease adjustment. The key is the hot key for Mode.
5.
ENTER key: Enters sub menus and select items. For models with DVI inputs, this key is
also the hot key for Input.
6. Power: Turns the power on or off.
1
3
2
4
5
6
1
3
2
4
5
6
For models without speakers
For models with speakers
OSD = On Screen Display.
The hot keys will display a graduated scale for adjusting the value of that setting, and will only operate while the
OSD menu is not currently displaying. Hot key displays will disappear after a few seconds of no key activity. See
Hot key mode on page 23.
23 How to adjust your monitor
Hot key mode
The monitor keys perform as hot keys to provide direct access to particular functions
whenever the menu isn't currently displaying on-screen.
Display Mode hot key (for models without speakers)
Volume hot key (for models with speakers)
Mode hot key
Input hot key (not available for analog-only models)
Press the key continually to switch
between Full and Aspect. The setting will
take effect immediately.
See also Display Mode on page 30.
Press the key to display the Volume
indicators. Further press the key will
increase the volume, while the key will
decrease the volume.
To Mute, press the Volume hot key for 3
seconds. To release Mute, press the
Volume hot key for 3 more seconds.
Press the key continually to switch
between the 6 modes for the main
window, including
Standard, Movie,
Game, Photo, sRGB, and Eco. The
setting will take effect immediately.
See also Picture Mode on page 29.
Press the ENTER key to toggle between
different PC video signal inputs that may
be connected to your monitor.
The setting will take effect immediately.
See also Input on page 33.
24 How to adjust your monitor
Main menu mode
You can use the OSD (On Screen Display) menu to adjust all the settings on your monitor.
Available menu options may vary depending on the input sources, functions and settings. Menu
options that are not available will become grayed out.
Press the MENU key to display the following main OSD menu.
For more information on each menu, please refer to the following pages:
• Display menu on page 25
• Picture menu on page 27
• Picture Advanced menu on page 29
• Audio menu on page 32
• System menu on page 33
Depending on your purchased model,
different OSD menus are available.
1. Display
2. Picture
3. Picture Advanced
4. Audio (for models with speakers)
5. System
Use the (up) or (down) keys to
highlight a menu item, and press the
ENTER key to enter the Menu item
settings.
DISPLAY
MODE:
Standard
Auto Adjustment
H. Position
V. Position
Pixel Clock
Phase
10
12
1
12
ENTER MENU
Exit
SelectMove
12345
The OSD menu languages may differ from the product supplied to your region, see “Language on page 34” under
“OSD Settings” for more details.
25 How to adjust your monitor
Display menu
Available menu options may vary depending on the input sources, functions and settings. Menu
options that are not available will become grayed out.
1. Press the MENU key to display the main
menu.
2. Press the or keys to select
DISPLAY and then press the ENTER
key to enter the menu.
3. Press the or keys to move the
highlight to a menu item and then press
the ENTER key to select that item.
4. Press the or keys to make
adjustments or selections.
5. To return to the previous menu, press
the MENU button.
DISPLAY
MODE:
Standard
Auto Adjustment
H. Position
V. Position
Pixel Clock
Phase
10
12
1
12
ENTER MENU
Exit
SelectMove
Item Function Operation Range
Auto
Adjustment
Optimizes and adjusts the
screen settings automatically
for you. The AUTO key is a ‘hot
key’ for this function.
When you connect a digital video
output using a digital (DVI or
HDMI) cable to your monitor,
the AUTO key and the
Auto
Adjustment
function will be
disabled.
Press the ENTER key to
select this option and
make adjustment.
H. Position Adjusts the horizontal position
of the screen image.
Press the or keys
to adjust the value.
0 to 100
V. Position Adjusts the vertical position of
the screen image.
0 to 100
Pixel Clock Adjusts the pixel clock
frequency timing to synchronize
with the analog input video
signal.
Not applicable to a digital
input signal.
See also: Picture optimization
on page 21.
0 to 100
26 How to adjust your monitor
Phase Adjusts the pixel clock phase
timing to synchronize with the
analog input video signal.
Not applicable to a digital
input signal.
See also: Picture optimization
on page 21.
Press the or keys
to adjust the value.
0 to 63
Item Function Operation Range
27 How to adjust your monitor
Picture menu
Available menu options may vary depending on the input sources, functions and settings. Menu
options that are not available will become grayed out.
1. Press the MENU key to display the main
menu.
2. Press the or keys to select
PICTURE and then press the ENTER
key to enter the menu.
3. Press the or keys to move the
highlight to a menu item and then press
the ENTER key to select that item.
4. Press the or keys to make
adjustments or selections.
5. To return to the previous menu, press
the MENU button.
PICTURE
MODE:
Standard
Brightness
Contrast
Sharpness
Gamma
Color
AMA
12
10
1
ENTER MENU
SelectMove Back
ON
3
Item Function Operation Range
Brightness Adjusts the balance between
light and dark shades.
Press the key to increase
the brightness and press the
key to decrease the
brightness.
0 to 100
Contrast Adjusts the degree of
difference between darkness
and lightness.
Press the key to increase
the contrast and press the
key to decrease the contrast.
0 to 100
Sharpness Adjusts the clarity and
visibility of the edges of the
subjects in the image.
Press the key to improve
the crispness of the display
and press the key to have
softness effect on the display.
1 to 5
Gamma Adjusts the tone luminance.
The default value is 3 (the
standard value for
Windows).
Press the key to increase
the gamma value (tone
becomes darker) and press
the key to decrease the
gamma value (tone becomes
lighter).
1~ 5
28 How to adjust your monitor
Color - Press ENTER to enter the Color menu.
Color
Temperature
Normal: Allows video and
still photographs to be
viewed with natural coloring.
This is the factory default
color.
Press the or keys to
select this option.
Bluish: Applies a cool tint to
the image and is factory
pre-set to the PC industry
standard white color.
Reddish: Applies a warm tint
to the image and is factory
pre-set to the news print
standard white color.
User Mode: The blend of the
Red, Green and Blue
primary colors can be
altered to change the color
tint of the image. Go to the
succeeding Red, Green, and
Blue menus to change the
settings.
Press the or keys and
the ENTER key to select Red,
Green, or Blue. Then use the
or keys to make the
color adjustments.
Red Tailors the image color tint.
Decreasing one or more of
the colors will reduce their
respective influence on the
color tint of the image. (e.g.
if you reduce the Blue level
the image will gradually take
on a yellowish tint. If you
reduce Green, the image will
become a magenta tint.)
Press the or keys to
adjust the value.
0 to 100
Green
Blue
Hue Adjusts the degree of how
we perceive colors.
Press the or keys to
adjust the value.
0 to 100
Saturation Adjusts the purity degree of
colors.
Press the or keys to
adjust the value.
0 to 100
Reset Color Resets the custom color
settings to the factory
defaults.
Press the or keys to
change the settings.
• YES
• NO
Press MENU to leave the Color menu.
AMA (for
models with
HDMI inputs)
Improves the gray level
response time of the LCD
panel.
Press the or keys to
change the settings.
• ON
• OFF
Item Function Operation Range
29 How to adjust your monitor
Picture Advanced menu
Available menu options may vary depending on the input sources, functions and settings. Menu
options that are not available will become grayed out.
1. Press the MENU key to display the main
menu.
2. Press the or keys to select
PICTURE ADVANCED and then press
the ENTER key to enter the menu.
3. Press the or keys to move the
highlight to a menu item and then press
the ENTER key to select that item.
4. Press the or keys to make
adjustments or selections.
5. To return to the previous menu, press
the MENU button.
PICTURE ADVANCED
MODE:
Standard
Picture Mode
Senseye Demo
Dynamic Contrast
Display Mode
Color Format
HDMI RGB PC Range
5
Standard
OFF
YUV
RGB (16~235)
ENTER MENU
Exit
SelectMove
Item Function Operation Range
Picture
Mode
Selects a picture mode that
best suits the type of images
shown on the screen.
• Standard - for basic PC
application.
• Movie - for viewing
videos.
• Game - for playing video
games.
• Photo - for viewing still
images.
• sRGB - for better color
matching representation
with the peripheral devices,
such as printers, DSCs, etc.
• Eco - for saving electricity
with low power
consumption by providing
minimum brightness for all
running programs.
Press the or keys to
change the settings.
• Standard
• Movie
• Game
• Photo
• sRGB
• Eco
30 How to adjust your monitor
Senseye
Demo
Displays the preview of
screen images under the
selected mode from Picture
Mode. The screen will be
divided into two windows;
the left window demonstrates
images of Standard mode,
while the right window
presents the images under the
specified mode.
Press the or keys to
change the settings.
• ON
• OFF
Dynamic
Contrast
The function is to
automatically detect the
distribution of an input visual
signal, and then to create the
optimal contrast.
Press the ENTER key to
select this option. Press the
or keys to change
the settings.
0 to 5
Display
Mode
This feature is provided to
allow aspect ratios other than
16:9 or 16:10 (depending on
the purchased model) to be
displayed without geometric
distortion.
• Overscan - Slightly enlarges
the input image. Use this
feature to hide annoying
edge noise if present around
your image.
• Full - Scales the input image
to fill the screen. Ideal for
16:9 or 16:10 (depending on
the purchased model)
aspect images.
• Aspect - The input image is
displayed without geometric
distortion filling as much of
the display as possible.
Depending on the
purchased model, 16:9 or
16:10 images will fill the
screen horizontally while 4:3
or 5:4 images will fill the
screen vertically.
To find out the monitor aspect
ratio of the purchased model,
please check the Specification
document on the provided
CD.
Press the or keys to
change the settings.
The options under Display
Mode
will be different
depending on the input
signal sources.
• Overscan
• Full
• Aspect
Item Function Operation Range
31 How to adjust your monitor
Color
Format
Determines the color space
(RGB or YUV) based on the
following detected video
signal:
• D-Sub (VGA) from PC: The
default Color Format is
RGB.
• D-Sub (Component) from a
video device: The default
Color Format is YUV.
You might need to manually set
the Color Format if colors
shown on the monitor screen
do not display properly.
• DVI (for models with DVI
inputs): Color Format is
automatically set to RGB.
• HDMI (for models with
HDMI inputs): Color
Format is not selectable. In
other words, Color Format
is automatically set
depending on the input
video source.
Press the ENTER key to
select this option. Press the
or keys to change
the settings.
• RGB
• YUV
HDMI RGB
PC Range
(for models
with HDMI
inputs)
Determines the range of
color scales. Select an option
that matches the RGB range
setting on the connected
HDMI device.
Press the ENTER key to
select this option. Press the
or keys to change
the settings.
• RGB (0 ~ 255)
• RGB (16 ~
235)
Item Function Operation Range
32 How to adjust your monitor
Audio menu
Available menu options may vary depending on the input sources, functions and settings. Menu
options that are not available will become grayed out.
1. Press the MENU key to display the main
menu.
2. Press the or keys to select
AUDIO and then press the ENTER key
to enter the menu.
3. Press the or keys to move the
highlight to a menu item and then press
the ENTER key to select that item.
4. Press the or keys to make
adjustments or selections.
5. To return to the previous menu, press
the MENU button.
Item Function Operation Range
Volume Adjusts the audio volume
Press the key to
increase the volume and
press the key to
decrease the volume.
0 ~ 100
Mute Mutes the audio input
Press the or keys to
change the settings.
• ON
• OFF
Audio Select
(for models
with HDMI
inputs)
Allow users to select the
audio source or let the
monitor detect it
automatically
Press the or keys to
change the settings.
• Auto Detect
• PC Audio
• HDMI Audio
AUDIO
MODE:
Standard
Volume
Mute
Audio Select
10
OFF
Auto Detect
ENTER MENU
Exit
SelectMove
33 How to adjust your monitor
System menu
Available menu options may vary depending on the input sources, functions and settings. Menu
options that are not available will become grayed out.
1. Press the MENU key to display the main
menu.
2. Press the or keys to select
SYSTEM and then press the ENTER
key to enter the menu.
3. Press the or keys to move the
highlight to a menu item and then
press the ENTER key to select that
item.
4. Press the or keys to make
adjustments or selections.
5. To return to the previous menu, press
the MENU button.
SYSTEM
MODE:
Standard
Input
OSD Settings
DDC/CI
HDMI Auto Switch
Auto Power off
Information
Reset All
D-sub
OFF
OFF
ENTER MENU
Exit
SelectMove
Item Function Operation Range
Input Use this to change the input
to that appropriate to your
video cable connection type.
Analog-only models do
not have the Input function.
Press the or keys
to change the settings.
• DVI
• D-sub (VGA)
• HDMI (for
models with
HDMI inputs)
OSD Settings - Press ENTER to enter the OSD Settings menu.
34 How to adjust your monitor
Language Sets the OSD menu language.
Press the or keys
to change the settings.
The language options
displayed on your OSD
may differ from those
shown on the right,
depending on the product
supplied in your region.
• English
• French
• German
• Italian
• Spanish
• Polish
• Japanese
• Czech
• Traditional
Chinese
• Hungarian
• Simplified
Chinese
• Serbo-Croatian
• Romanian
• Dutch
• Russian
• Swedish
• Portuguese
H. Position Adjusts the horizontal
position of the OSD menu.
Press the or keys
to change the settings.
0 to 100
V. Position Adjusts the vertical position
of the OSD menu.
0 to 100
Display Time Adjusts the display time of the
OSD menu.
• 5 Sec.
• 10 Sec.
• 15 Sec.
• 20 Sec.
• 25 Sec.
• 30 Sec.
Item Function Operation Range
35 How to adjust your monitor
OSD Lock Prevents all the monitor
settings from being
accidentally changed. When
this function is activated, the
OSD controls and hotkey
operations will be disabled.
Press the or keys
to change the settings.
To unlock the OSD
controls when the OSD is
preset to be locked, press
and hold the
MENU key
for 15 seconds to enter
the
OSD Lock option and
make changes.
Alternatively, you may use
the or keys to select
NO in the OSD Lock
submenu from the
OSD
Settings
menu, and all
OSD controls will be
accessible.
• YES
• NO
Press
MENU to leave the OSD Settings menu.
DDC/CI* Allows the monitor settings
to be set through the
software on the PC.
Press the
ENTER key to
select this option. Press
the or keys to
change the settings.
• ON
• OFF
HDMI Auto
Switch
(for models
with HDMI
inputs)
When this function is
activated, HDMI port will be
in the input auto select loop.
Otherwise, HDMI can only be
selected by input select or by
hot key.
Press the ENTER key to
select this option. Press
the or keys to
change the settings.
• ON
• OFF
Auto Power
off
Sets the time to power off the
monitor automatically in
power saving mode.
Press the ENTER key to
select this option. Press
the or keys to
change the settings.
• OFF
• 10min.
• 20min.
• 30min.
Information Displays the current monitor
property settings.
• Input
• Current
Resolution
• Optimum
Resolution
(best with the
monitor)
• Model Name
Reset All Resets all mode, color and
geometry settings to the
factory default values.
Press the or keys
to change the settings.
• YES
• NO
Item Function Operation Range
36 How to adjust your monitor
*DDC/CI, short for Display Data Channel/Command Interface, which was developed by Video Electronics
Standards Association (VESA). DDC/CI capability allows monitor controls to be sent via the software for remote
diagnostics.
37 Appendix: Assembling your monitor with a height adjustment stand (HAS)
Appendix: Assembling your monitor with a height
adjustment stand (HAS)
How to attach the monitor base
• If the computer is turned on you must turn it off before continuing.
Do not plug-in or turn-on the power to the monitor until instructed to do so.
• The following illustrations are for your reference only. Available input and output jacks may vary depending on
the purchased model.
Please be careful to prevent damage to the monitor. Placing
the screen surface on an object like a stapler or a mouse will
crack the glass or damage the LCD substrate voiding your
warranty. Sliding or scraping the monitor around on your
desk will scratch or damage the monitor surround and
controls.
Protect the monitor and screen by clearing a flat open
area on your desk and placing a soft item like the
monitor packaging bag on the desk for padding.
Gently lay the screen face down on a flat clean padded
surface.
While holding the monitor firmly against the desk, pull
the monitor stand arm upwards clear of the monitor.
Orient and align the stand base socket with the end of
the stand arm, then push them together. Tighten the
thumbscrew on the bottom of the monitor base as
illustrated.
Gently attempt to pull them back apart to check that
they have properly engaged.
Carefully lift the monitor, turn it over and place it
upright on its stand on a flat even surface.
1
2
3
38 Appendix: Assembling your monitor with a height adjustment stand (HAS)
Extend the monitor to the maximum extended position.
Then tilt the monitor. And rotate the monitor 90
degrees counterclockwise as illustrated.
You might want to adjust the monitor height. See
Adjusting the monitor height on page 40 for more
information.
You should position the monitor and angle the screen to
minimize unwanted reflections from other light sources.
-90
-5-5
O O
~ +15~ +15
O
-5
O
~ +15
O
39 Appendix: Assembling your monitor with a height adjustment stand (HAS)
How to detach the base
To move the monitor properly, you should extend the monitor to its maximum
height, then place one hand on the upper part of the monitor stand and the other
hand on the lower part of the stand as illustrated.
1. Prepare the monitor and area.
Turn off the monitor and the power before unplugging
the power cable. Turn off the computer before
unplugging the monitor signal cable.
Gently lift the display up and extend the stand to the
maximum extended position.
Protect the monitor and screen by clearing a flat open
area on your desk and placing a soft item like a towel on
the desk for padding, before laying the screen face down
on a flat clean padded surface.
Please be careful to prevent damage to the monitor. Placing
the screen surface on an object like a stapler or a mouse will
crack the glass or damage the LCD substrate voiding your
warranty. Sliding or scraping the monitor around on your
desk will scratch or damage the monitor surround and
controls.
2. Release the thumbscrew on the bottom of
the monitor base and detach the monitor
base as illustrated.
2
1
3
40 Appendix: Assembling your monitor with a height adjustment stand (HAS)
Adjusting the monitor height
To adjust the monitor height, hold both the left and the
right sides of the monitor to lower the monitor or lift it
up to the desired height.
• Avoid placing hands on the upper or lower part of the height-adjustable stand or at the
bottom of the monitor, as ascending or descending monitor might cause personal
injuries. Keep children out of reach of the monitor while performing this operation.
• If the monitor has been rotated to portrait mode and height adjustment is desired, you
should be noted that the wide screen will keep the monitor from being lowered to its
minimum height.
41 Appendix: Assembling your monitor with a height adjustment stand (HAS)
Rotating the monitor
1. Pivot the display.
Before rotating the monitor with a portrait viewing orientation, the display has to be rotated 90 degrees.
Right-click the desktop and select Screen resolution from the popup menu. Select Portrait in
Orientation, and apply the setting.
Depending on the operating system on your PC, different procedures should be followed to adjust the screen
orientation. Refer to the help document of your operating system for details.
2. Fully extend the monitor and tilt it.
Gently lift the display up and extend it to the maximum
extended position. Then tilt the monitor.
The monitor should be vertically extended to allow the
monitor to rotate from landscape to portrait mode.
3. Rotate the monitor 90 degrees clockwise as
illustrated.
To avoid the edge of the LCD display hitting the monitor base
surface while it is being rotated, do tilt and extend the monitor
to the highest position before you start to rotate the display.
You should also make sure there are no obstacles around the
monitor and there is enough room for cables. You might need
to route the cables again via the cable clip after the rotation.
90
42 Appendix: Assembling your monitor with a height adjustment stand (HAS)
Viewing angle adjustment
You may position the screen to the desired angle with -5° to +15° monitor tilt, 90° (left and
right total) monitor swivel, and 110 mm monitor height.
4. Adjust the monitor to the desired viewing
angle.
-5-5
O O
~ +15~ +15
O
-5
O
~ +15
O
-45-45
O O
~ +45~ +45
O
-45
O
~ +45
O
110 mm
43 Appendix: Assembling your monitor with a height adjustment stand (HAS)
Using the monitor wall mounting kit
The back of your LCD monitor has a VESA standard mount with 100mm pattern, allowing the
installation of a wall mount bracket. Before starting to install a monitor wall mounting kit,
please read the precautions carefully.
Precautions:
• Install your monitor and monitor mounting kit on a wall with flat surface.
• Ensure that the wall material is stable to support the weight of the monitor.
• Turn off the monitor and the power before disconnecting the cables from the LCD monitor.
1. Remove the monitor base.
Lay the screen face down on a clean and well-padded
surface. Detach the monitor base as instructed in How to
detach the base on page 39.
2. Remove the monitor stand.
Use a a cross-pointed screwdriver to release the screws
that fixing the monitor stand to the monitor.The use of a
magnetic-head screwdriver is recommended to avoid of
losing the screws.
Then pull the monitor stand backward away from the
monitor.
In case you intend to use your monitor on the stand in the
future, please keep the monitor base, monitor stand, and
screws somewhere safe for future use.
3. Follow the instruction manuals of the wall
mount bracket you purchased to complete
the installation.
44 Troubleshooting
Troubleshooting
Frequently asked questions (FAQ)
The image is blurred:
Read the instructions on the link "Adjusting the Screen Resolution" on the CD, and then
select the correct resolution, refresh rate and make adjustments based on these instructions
How do you use a VGA extension cable?
Remove the extension cable for the test. Is the image now in focus? If not, optimize the
image by working through the instructions in the "Adjusting the refresh rate" section on the
link "Adjusting the Screen Resolution". It is normal for blurring to occur due to conduction
losses in extension cables. You can minimize these losses by using an extension cable with
better conduction quality or with a built-in booster.
Does the blurring only occur at resolutions lower than the native (maximum) resolution?
Read the instructions on the link "Adjusting the Screen Resolution" on the CD. Select the
native resolution.
Pixel errors can be seen:
One of several pixels is permanently black, one or more pixels are permanently white, one
or more pixels are permanently red, green, blue or another color.
• Clean the LCD screen.
• Cycle power on-off.
• These are pixels that are permanently on or off and is a natural defect that occurs in LCD
technology.
The image has a faulty coloration:
It has a yellow, blue or pink appearance.
Select MENU > PICTURE > Color > Reset Color, and then choose “YES” in the “Caution”
message box to reset the color settings to the factory defaults.
If the image is still not correct and the OSD also has faulty coloration, this means one of the
three primary colors is missing in the signal input. Now check the signal cable connectors. If
any pin is bent or broken off, please contact your dealer to get necessary support.
No image can be seen:
Is the prompt on the display illuminated in green?
If the LED is illuminated in green and there is a message “Out of Range” on the screen, this
means you are using a display mode that this monitor does not support, please change the
setting to one of the supported mode. Please read the “Preset display modes” section from
the link "Adjusting the Screen Resolution".
Faint shadow from the static image displayed is visible on the screen:
• Activate the power management function to let your computer and monitor go into a low
power "sleep" mode when not actively in use.
• Use a screensaver to prevent the occurrence of image retention.
45 Troubleshooting
Need more help?
If your problems remain after checking this manual, please contact your place of purchase or
e-mail us at: Support@BenQ.com.
Is the prompt on the display illuminated in orange?
If the LED is illuminated in orange, the power management mode is active. Press any button
on the computer keyboard or move the mouse. If that does not help, check the signal cable
connectors. If any pin is bent or broken off, please contact your dealer to get necessary
support.
Is the prompt on the display not illuminated at all?
Check the power supply mains socket, the external power supply and the mains switch.
The image is distorted, flashes or flickers:
Read the instructions on the link "Adjusting the Screen Resolution" on the CD, and then
select the correct resolution, refresh rate and make adjustments based on these instructions.
You are running the monitor at its native resolution, but the image is still distorted.
Images from different input sources may appear distorted or stretched on the monitor
running at its native resolution. To have the optimal display performance of each type of input
sources, you can use the "Display Mode" function to set a proper aspect ratio for the input
sources. See Display Mode on page 30 for details.
The image is displaced in one direction:
Read the instructions on the link "Adjusting the Screen Resolution" on the CD, and then
select the correct resolution, refresh rate and make adjustments based on these instructions.
The OSD controls are inaccessible:
• To unlock the OSD controls when the OSD is preset to be locked, press and hold the
“MENU” key for 15 seconds to enter the “OSD Lock” option and make changes.
• Alternatively, you may use the or keys to select “NO” in the “OSD Lock” submenu
from the “OSD Settings” menu (under SYSTEM), and all OSD controls will be accessible.
No sound can be heard from the built-in speakers (for models with speakers only):
• Check whether Line In is properly connected.
• Increase the volume (volume may be muted or too low).
• Remove your headphone and/or external speakers. (If they are connected to the monitor,
the built-in speakers are automatically muted.)
No sound can be heard from the connected external speakers (for models with speakers
only):
• Remove your headphone (if the headphone is connected to the monitor).
• Check whether the headphone jack is properly connected.
• If the external speakers are USB-powered, check whether the USB connection is OK.
• Increase the volume (volume may be muted or too low) on the external speakers.
… 21 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw BenQ G2251TM bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van BenQ G2251TM in de taal/talen: Engels als bijlage per email.

De handleiding is 3,08 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van BenQ G2251TM

BenQ G2251TM Gebruiksaanwijzing - Nederlands - 48 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info