818949
84
Verklein
Vergroot
Pagina terug
1/86
Pagina verder
Chapter 14 Glossary
RTK GPS zone
The working area for a robot performing pattern mowing. The RTK GPS zone is defined
by the robot making a tour of the peripheral wire.
Site
The entire area which includes the area in which the robot works.
Sleep
A robot will enter sleep mode 15 minutes after an alarm has occurred which has not been
cleared. After 2 days in sleep mode, the robot will enter the OFF mode. This will also
occur if the battery charge level reaches a low level. When in sleep mode the robot uses
minimal power to reduce the risk of the battery.
The robot can be brought out of sleep mode by:
- clearing the alarm and switching the robot on, using the button on the LED screen,
- pushing the robot to the charging station, if the battery is flat,
- sending a remote wakeup command via the web portal.
Start zone
A defined position within a parcel which determines where the robot will start working.
Station loop
A station loop is a short wire around a charging station which is used to guide the robot
into the station. When the robot detects that it is in the station loop it follows the wire until
it arrives in the station.
Station positioning beacon
A device, usually installed in the charging station, that emits a signal that allows the robot
to accurately locate the charging station.
Subscription
A means to access the functionality of the web portal. There are four types of
subscription.
Free: this is available for 2 months after installation for a robot using RTK or 2 years for a
robot not using RTK.
Basic: the subscription type for a robot not using RTK. All the functionality of the web
portal are available.
PremiumRTK: the subscription type for a robot using RTK. All the functionality of the web
portal are available for this type of robot. This subscription is essential if the robot is to
operate using RTK GPS.
Offline: this type of subscription is free, but provides on limited functionality on the web
portal.
Terrain
An area of grass surrounding the field that is not to be mowed.
Track border
A width of grass around the edge of the parcel in which the robot works. The robot follows
the track border when leaving or returning to a station unless it is using GPS.
There is no track border specified for a wire that acts as a "return to station loop (page
84)".
84 Big mow BM 1050 User's Manual Version: Release 4.5.0 Last updated: 2022-08-20
84

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Belrobotics Parcmow Big Mow - BM1050 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Belrobotics Parcmow Big Mow - BM1050 in de taal/talen: Engels als bijlage per email.

De handleiding is 5.23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info