747165
4
Verklein
Vergroot
Pagina terug
1/13
Pagina verder
5
Changing the radio key
If your Visit system is activated for no reason, there is probably a nearby system that triggers
yours. In order to avoid radio interference you need to change the radio key on all units. The
radio key switches are located on the back of the CO alarm, under the mounting bracket
Here is how you change the radio key:
1 Remove the CO alarm from the bracket and move any of the radio
key switches 1 – 6 to the up = on position to change the radio key.
2 Press and hold the test/function button on the receiver until the
green and yellow Visit LEDs blink alternately. Release the button.
3 Press the test/hush button on the CO alarm until the alarm sounds to send the new radio key.
4 All Visit LEDs on the receiver blink 5 times to show that the radio key has been changed.
It then returns to normal mode.
Note: All Visit units must be set to the same radio key in order to operate as a group. If
broadcast mode is activated, all Visit receivers will respond regardless of the radio key settings.
x5
6
Carbon monoxide – the silent killer
What is carbon monoxide?
Many people are killed each year, and many more suer ill health from Carbon Monoxide (CO)
poisoning. CO is an invisible, odorless, tasteless and extremely toxic gas. It is produced by
appliances and vehicles burning fuels, such as coal, oil, natural gas, propane, kerosene, paran,
wood, gasoline, diesel, charcoal etc. CO is absorbed by red blood cells in the lungs in prefer-
ence to oxygen – this results in rapid damage to the heart and brain from oxygen starvation.
High levels of CO in a house can be caused by:
Incorrectly or poorly installed fuel-burning appliances.
Blocked or cracked chimneys/ues.
Blocked vents or draught-proong which makes areas with fuel burning appliances or
replaces airtight.
Engines of cars, lawnmowers etc. left running in conned spaces.
Portable kerosene or propane heaters in poorly ventilated rooms.
What happens when your CO alarm detects carbon monoxide?
When the CO alarm detects potentially dangerous levels of CO, it blinks the red alarm LED
immediately and then sounds a loud alarm if the CO persists. The Signal pattern table on page
6 shows how the CO alarm reacts to dierent levels of CO gas and exposure time. At higher
levels of CO, the alarm turns on sooner. The rate of blinking of the red LED indicates the level of
CO. If your CO alarm sounds, follow the instructions in the section What to do when the alarm
sounds on page 17.
NEVER IGNORE THE ALARM!
1 2 3 4
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bellman BE1210 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bellman BE1210 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,38 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info