4
• Keep hands and utensils away from cutting
blade while chopping food to reduce the risk
of injury to persons or damage to the food
processor. A plastic or wooden scraper may
be used but only when the blender is not
running.
• Never attach the chopping blade without
the bowl in place.
• Do not operate the appliance when empty.
• Do not operate any appliance with a
damaged power cord or plug after the
appliance malfunctions, or is dropped or
damaged in any manner.
• Ensure the bowl and lid are tted correctly
before starting appliance.
• Blades must stop completely before removing
lid.
• Do not touch the blades when removing food
from the bowl or when removing the blades
for cleaning as they are sharp.
• Do not attempt to override the cover lock
mechanism.
• Do not touch the blades, especially when the
appliance is plugged in. The blades are very
sharp.
• If the blades get stuck, unplug the appliance
before you remove the ingredients blocking
the blades.
• The appliance becomes very hot during
steaming and may cause burns when
touched. Only lift the bowl by its handle.
• Beware of hot steam that comes out of the
steam basket during steaming and when you
remove its lid.
• Always unplug the appliance and let it cool
down before you clean it.
• Never use the bowl or any other part of the
appliance in a microwave, as they are not
suitable for this use.
• Never sterilise the bowl or any other part of
the appliance in a steriliser or in a microwave,
as they are not suitable for this use.
• Do not use the appliance if it has fallen or is
damaged in any way.
• Make sure that you do not overll the bowl.
Do not exceed the maximum level indicated
on bowl.
• When you steam ingredients, make sure that
you do not overll the steam basket.
• When you blend liquids, do not exceed the
maximum level indicated on the bowl.
• Never connect this appliance to a timer
switch or remote control system in order to
avoid a hazardous situation.
• Always check the consistency of baby food.
Make sure there are no chunks in the food.
• Turn the Measuring cup to lock position whilst
using the machine at high speeds or when
using the Pulse function.
Warning
If the supply power cord is damaged, the power
cord must be replaced by the manufacturer,
its service agent or similarly qualied persons in
order to avoid a hazard.
This product has not been designed for any uses
other than those specied in this booklet.
Save These Instructions
