• Possible error messages:
* 3x short audio signal, audible when the motor-knob operates:
Receiver batteries need changing soon (having heard this signal, the
appliance can be ignited another ten times approximately).
* 5 second unbroken tone:
Error. For example, one of the cables may not be properly connected.
Important: If the pilot fl ame goes out, then wait for
at least 5 minutes before repeating the
above procedure.
Setting the fl ame height / Extinguishing the fi re
• After ignition, the burner automatically sets the fl ames
to the maximum height.
• Press button
(small fl ame) to lower the fl ames and
to turn off the burner (Extinguishing the fi re: small
fl ame button: pilot light remains burning (standby
position)!)
(Pressing briefl y the
(small fl ame) button gradually
lowers the fl ames to the low position.)
• Pressing the
(small fl ame) button twice automatically
lowers the fl ames to the low position. (When this
happens, the fl ames will fi rst automatically go to
maximum!) This is indicated by “LO” on the display.
2x
Standby position (pilot light)
Press (small fl ame) and keep pressed to set
appliance to pilot light.
