Handleiding Behringer XAir - XR12 (pagina 36 van 46) (Engels)

660502

Verklein

Vergroot

Pagina terug

1/46

Pagina verder

36 X AIR User Manual

Gated Reverb

This eect was originally achieved by combining a reverb with a noise gate.

Ourgated reverb creates the same impression by a special shaping of the

reverbtail.

Gated Reverb is especially eective for creating a 1980s-style snare sound or to

enlarge the presence of a kick drum. (Inspired by the Lexicon 300/480L)

PRE DELAY controls the amount of time before the reverberation is heard

following the source signal. DECAY controls the amount of time it takes for the

reverb to dissipate. ATTACK controls how fast the reection density builds up.

DENSITY shapes the reverb decay tail. The higher the density, the greater the

number of sound reections. SPREAD controls how the reection is distributed

through the envelope of the reverb. The LO CUT knob sets the frequency beneath

which the source signal will not pass through the reverb. The HiSvFr/ HiSvGn

knobs adjust a Hi-Shelving lter at the input of the reverb eect. DIFF(USION)

controls the initial reection density.

Reverse Reverb

Reverse Reverb takes the trail of a reverb, turns it around, and places it in front

of the sound source. Use the swelling crescendo of the Reverse Reverb to add an

ethereal quality to vocal and snare tracks. (Inspired by the Lexicon 300/480L)

Adjusting the PRE DELAY knob adds up to 200 milliseconds of time before the

reverb follows the source signal. The DECAY knob adjusts the time it takes for

the reverb to completely dissipate. RISE controls how quickly the eect builds

up. DIFF(USION) controls the initial reection density. SPREAD controls how the

reection is distributed through the envelope of the reverb. The LO CUT knob

sets a low frequency beneath which the source signal will not pass through the

reverb. The HiSvFr/HiSvGn knobs adjust a Hi-Shelving lter at the input of the

reverb eect.

Stereo Delay

Stereo Delay provides independent control of left and right delay (echo) times

and features high and low pass lters for enhanced tone shaping of the delayed

signals. Use the Stereo Delay to give your mono signals a wide presence in the

stereo eld.

The MIX control lets you blend the source signal and the delayed signal.

TIMEadjusts the master delay time up to three seconds. LO CUT adjusts the low

frequency cut, allowing lower frequencies to remain unaected by the delay.

HI CUT adjusts the high frequency cut, allowing higher frequencies to remain

unaected by the delay. FACTOR L sets the delay on the left channel to rhythmic

fractions of the master delay time. FACTOR R sets the delay on the right channel

to rhythmic fractions of the master delay time. OFFSET LR adds a delay dierence

between the left and right delayed signals. The FEED LO CUT/HI CUT adjusts lters

in the feedback paths. FEED L and FEED R control the amount of feedback for

the left and right channels. MODE sets the feedback mode: Mode ST sets normal

feedback for both channels, X crosses feedbacks between left and right channels.

M creates a mono mix within the feedback chain.

3-Tap Delay

Sometimes called a 3-Tap Delay, the Triple Delay provides three delay stages with

independent frequency, gain, and pan controls. Create time-based echo eects

with the Triple Delay to increase the sense of stereo separation.

TIME BASE sets the master delay time, which is also the delay time for the rst

stage. GAIN BASE sets the gain level of the rst stage of the delay. PAN BASE

sets the position of the rst delay stage in the stereo eld. LO CUT sets the

frequency at which the source signal can begin passing through the delay.

HICUT sets the frequency at which the source signal no longer passes through

the delay. X-FEEDindicates that stereo cross-feedback of the delays is active.

MONOactivates a mono mix of both channels for the delay input. FEED adjusts

the amount of feedback. FACTOR A controls the amount of delay time in the

second stage of the delay. GAIN A controls the gain level of the second delay

stage. PAN A sets the position of the second delay stage in the stereo eld.

FACTOR B controls the amount of delay time in the third stage of the delay.

GAINB controls the gain level of the third delay stage. PAN B sets the position of

the third gain stage in the stereo eld.

Rhythm Delay

The Rhythm Delay provides 4 stages of delay with independently adjustable gain

and rate, allowing unique syncopation to be created in the layered repeats.

TIME BASE sets the master delay time, which is also the delay time for the rst

stage. GAIN BASE sets the gain for the rst stage. SPREAD positions the rst delay

stage in the stereo eld. A global FEEDBACK, LO and HI CUT adjustment are also

available. FACTOR A, B and C adjust the delay rate relative to the global TIME BASE

setting for the 2nd, 3rd and 4th stages respectively. Each stage also has its own

GAIN adjustment. MONO activates a mono mix of both channels for the delay

input. X-FEED indicates that stereo cross-feedback of the delays is active.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Behringer XAir - XR12 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Andere handleiding(en) van Behringer XAir - XR12

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info