Handleiding Behringer X32 Rack (pagina 53 van 64) (Engels)

660494

Verklein

Vergroot

Pagina terug

1/64

Pagina verder

53 X32 RACK DIGITAL MIXER User Manual

7.9 Scenes Screen

The scenes screen allows setup for saving and recalling dierent memory scenes

of the console. The comprehensive recallability of the console (including gain

settings for the digitally controlled mic preamps) is one of the most powerful

aspects of the console.

The scenes screen contains the following separate tabs:

Home: This screen contains a general overview of the scenes contained in the

console, along with their custom names and what parameters are included in

each scene.

MIDI: This screen allows the console to associate dierent scenes with incoming

and outgoing MIDI messages, allowing the console’s scene changes to control or

be controlled by external MIDI equipment.

Parameter Safe: This screen congures which console parameters are and are

not saved/switched with the console scenes.

Channel Safe: This screen congures which console channels are and are not

changed when a console scene change occurs.

7.9.1 Scenes Screen: Home Tab

The scenes screen’s home tab shows a general overview of the scenes that

have been congured in the console, along with their custom names and what

parameters are included in each scene.

For a setting where scenes are used heavily and are very critical (such as a theater

performance), this would be a good screen to leave on at all times so that the

console operator can be completely sure, at all times, what scene the console

currently resides on and what scene will come up next when the “Go” button

ispressed.

To adjust the various settings on the home tab, perform the following steps:

1. Rotate the 1st encoder to scroll among the available scenes in the scenes list,

which is displayed on the left side of the color screen.

2. Tap the 1st encoder to “go” to the currently selected scene in the list,

switching the console to the state it was in when that scene was stored

3. Rotate the 2nd encoder to select a scene in the list to be “skipped”

whencycling through scenes using the Prev and Next buttons.

4. Tap the 2nd encoder to complete the “skip” command on the currently

selected scene. That scene will now be skipped when scrolling through

thelist.

5. Rotate the 3rd encoder to scroll back through recent changes.

6. Tap the 3rd encoder to undo the recent change.

7. Rotate the 4th encoder to select a slot to save a new scene.

8. Tap the 4th encoder to complete the save operation. The console’s current

state will be overwritten on the scene number that was selected with

theencoder.

9. Rotate the 6th encoder to select which aspects of the console’s routing

are made “safe” from a scene change, and will be unaected by any scene

changes that occur. Routing choices that can be safed include:

• Routing

• Output Patch

• Mic Preamp Gain (HA, short for head-amplier)

• Conguration

• Channel Processing

• Mix Buses

• Eects

• Talkback

10. Tap the 6th encoder to select any of the above choices as the encoder

rotation is used to select them. Multiple categories can be selected at the

same time.

7.9.2 Scenes Screen: MIDI Tab

This MIDI tab of the scenes screen allows the console to associate dierent scenes

with outgoing MIDI messages, allowing the console’s scene changes to control by

external MIDI equipment.

For instance, the user could congure the console to issue a MIDI program

change message as each new scene is recalled, with the outgoing MIDI message

triggering a new scene of a MIDI-equipped lighting controller.

Note - Scenes can be recalled via MIDI using simple Program Change 1-100

commands, provided that MIDI Scene Recall is generally enabled on the

Setup/Remote page.

To adjust the various settings on the MIDI tab, perform the following steps:

1. Rotate the 1st encoder to select a scene to edit.

2. Tap the 2nd encoder to “safe” the console from any incoming MIDI messages,

preventing the console from switching scenes in response to MIDI data.

3. Rotate the 3rd encoder to select what type of MIDI event is transmitted by

the console when a scene change is issued. The choices include:

• O (No MIDI event)

• MIDI program change

• MIDI control change

• Note

4. Encoders 4, 5 and 6 adjust the channel, number, and velocity (if applicable).

The color screen displays the MIDI data associated with the currently

selectedscene.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Behringer X32 Rack Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Andere handleiding(en) van Behringer X32 Rack

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info