660494
46
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
46 X32 RACK DIGITAL MIXER User Manual
7.7 Setup Screen
The setup screen oers various controls for global, high-level functions of
the console such as display adjustments, sample rates and synchronization,
usersettings, and network conguration.
The setup screen contains the following separate tabs:
1. Global: This screen oers adjustments for various global preferences of how
the console operates.
2. Cong: This screen oers adjustments for sample rates and synchronization,
as well as conguring high-level settings for signal path buses.
3. Remote: This screen oers dierent controls for setting up the
console as a control surface for various DAW recording software on a
connectedcomputer.
4. Network: This screen oers dierent controls for attaching the console to a
standard Ethernet network.
5. DCA Groups: This screen oers controls for various aspects of the console’s
DCA groups.
6. Card: This screen selects the input/output congurations of the USB
interface card.
None of the setup screen’s tabs contain a secondary level of encoder functions,
sothe Layer up/down keys do not need to be used for these screens.
7.7.1 Setup Screen: Global Tab:
The setup screen’s global tab allows the user to adjust various global controls of
the console, such as display brightness and contrast, the panning mode used by
channels, text languages, and more.
To make adjustments in the global screen, perform the following steps:
1. Adjust the rst encoder to select various console settings for pop-up
messages and assorted preferences.
2. Tap the 1st encoder to turn the currently selected setting on/o.
3. Adjust the 2nd encoder to select settings for linking multiple consolechannels.
4. Tap the 2nd encoder to turn the currently selected setting on/o.
5. Adjust the 3rd encoder to set the console’s panning mode, which aects how
channel panning is performed in the stereo eld. The two choices are:
• LR + Mono: This is the default mode of the console. In this mode,
channels can be panned between the left and right mix outputs, as well
as assigned to the separate mono mix bus. In this mode, the Center/
Mono bus is not aected by from the pan control.
• LCR enable: In this mode, the signal is panned from Left over Center
to Right. This behavior is emulated by the faders on the Main tab,
abehavior that is more intuitive than on other consoles. Note that in
this mode, the denition of “mono” changes since the setup is no longer
mono, but rather a setup consisting of Left-Center-Right.
6. Adjust the 4th encoder to set the brightness of the various LED lights of the
console, from a range of 1-100.
7. Adjust the 5th encoder to set the brightness of the color screen
(maindisplay), from a range of 1-100. In order to prevent any errors by losing
power during a store operation, we recommend using the “Safe Shutdown”
function by pressing the 5th encoder, then turning the power switch o.
8. Adjust the 6th encoder to set the brightness of the individual LCD screens
(channel display) above each input and output channel, from a range of1-100.
NOTE: The X32 can be locked against unintended use by pressing the 6th encoder
to activate ’Lock Console’. In this state, the UI will not allow any changes to be
made and the display shows “X”. Keep HOME depressed for about 5 seconds to
unlock the X32 again.
46

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Behringer X32 Rack bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Behringer X32 Rack in de taal/talen: Engels als bijlage per email.

De handleiding is 6,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Behringer X32 Rack

Behringer X32 Rack Snelstart handleiding - Deutsch, English, Français, Português, Espanõl - 27 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info