Handleiding Behringer X32 Compact (pagina 65 van 74) (Engels)

660491

Verklein

Vergroot

Pagina terug

1/74

Pagina verder

65 X32 COMPACT DIGITAL MIXER User Manual

7.13 Scenes Screen

The scenes screen allows setup for saving and recalling dierent memory scenes

of the console. The comprehensive recallability of the console (including gain

settings for the digitally controlled mic preamps) is one of the most powerful

aspects of the console.

The scenes screen contains the following separate tabs:

Home: This screen contains a general overview of the scenes contained in the

console, along with their custom names and what parameters are included in

each scene.

MIDI: This screen allows the console to associate dierent scenes with incoming

and outgoing MIDI messages, allowing the console’s scene changes to control or

be controlled by external MIDI equipment.

Parameter Safe: This screen congures which console parameters are and are

not saved/switched with the console scenes.

Channel Safe: This screen congures which console channels are and are not

changed when a console scene change occurs.

7.13.1 Scenes Screen: Home Tab

The scenes screen’s home tab shows a general overview of the scenes that

have been congured in the console, along with their custom names and what

parameters are included in each scene.

For a setting where scenes are used heavily and are very critical (such as a theater

performance), this would be a good screen to leave on at all times so that the

console operator can be completely sure, at all times, what scene the console

currently resides on and what scene will come up next when the “Go” button

ispressed.

To adjust the various settings on the home tab, perform the following steps:

1. Rotate the 1st encoder to scroll among the available scenes in the scenes list,

which is displayed on the left side of the color screen.

2. Tap the 1st encoder to “go” to the currently selected scene in the list,

switching the console to the state it was in when that scene was stored

3. Rotate the 2nd encoder to select a scene in the list to be “skipped”

whencycling through scenes using the Prev and Next buttons.

4. Tap the 2nd encoder to complete the “skip” command on the currently

selected scene. That scene will now be skipped when scrolling through

thelist.

5. Rotate the 3rd encoder to add a Cue to the list, and determine if it will be

added as a completely new entry, or a subset of an existing cue. Tap the

encoder to bring up the edit screen where the cue can be named.

6. Rotate the 4th encoder to scroll through the list of scenes and tap the

encoder to select.

7. Rotate the 5th encoder to scroll through the list of snippets and tap the

encoder to select.

8. Tap the 6th encoder to undo.

7.13. 2 Scenes Screen: Scenes Tab

The scenes tab allows scenes to be saved, edited and loaded.

1. Rotate the 1st encoder to select a saved scene and tap the encoder to load.

2. Rotate the 2nd encoder to select a scene slot and press the encoder to bring

up the save screen where a name and note can be entered.

3. Rotate the 3rd encoder to select a scene to edit, then tap the encoder to

bring up the edit screen.

4. Tap the 4th encoder to import settings from an attached USB drive.

5. Tap the 5th encoder to save settings to an attached USB drive.

6. Rotate the 6th encoder to scroll through the list of scene safes, tapping the

encoder on each box that you wish to omit from the saved scene.

7.13. 3 Scenes Screen: Snippets Tab

1. The snippets tab allows specic bits of information to be saved, edited and

loaded.

2. 1. Rotate the 1st encoder to scroll through the list of snippets, then tap the

encoder to load.

3. 2. Rotate the 2nd encoder to scroll through the snippet slots and tap the

encoder to bring up the save screen.

4. 3. Rotate encoders 3-6 to scroll through the list of inputs, outputs and

specic information to be saved, tapping the encoder to check the boxes.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Behringer X32 Compact Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Behringer X32 Compact

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info