Handleiding Beaufort Soho 2017 (pagina 8 van 14) (Engels)

665844

Verklein

Vergroot

Pagina terug

1/14

Pagina verder

14 15

PARAMETER SETTING

1 Items to be Set:

1 Data reset

2 km/mile

3 Light sensitivity

4 Display backlight brightness

5 Automatic o time

6 Maintenance warning settings

7 Input of the password

8 Wheel diameter selection

9 Setting speed limit

2 Setting Preparation

When the display is active, press i twice (interval

< 0.3 seconds). The system will enter the MENU

parameter setting state, in which the display pa-

rameters can be set. Press i twice again (interval

< 0.3 seconds) to return to the main menu.

In the parameter setting state, when the

parameter you want to set begins to flash, press

/ to adjust the parameter value. Briefly press

to switch between the parameters to be set.

Press twice (interval < 0.3 seconds) to exit the

submenu. If no operation is performed for 10

seconds, the display will return to the normal

riding display.

3 Data Reset

Press i twice (interval < 0.3 seconds) – the dis-

play enters the MENU state. In the speed field tC

is displayed. If you press + , a y is also displayed.

Now all temporary data, e.g. maximum speed

(MAXS), average speed (AVG) and single-trip dis-

tance (TRIP) can be cleared. Briefly press (< 0.3

seconds) to enter the km/mile setting interface.

If the user does not reset the data, the single

trip distance and the accumulated total riding

time will be automatically cleared when the

accumulated total riding time exceeds 99 hours

and 59 minutes.

Note: The data will not be cleared when the

display’s lightsensing

function is set to 0 or when it is switched o.

4 km/mile

When the speed field displays S7, press +/- to

switch between km/h and mph, or to set km

or mile.

Aer this setting, briefly press i (< 0.3 seconds) to

enter the setting interface of light sensitivity.

5 Light Sensitivity

When the speed field displays bL0, use +/- to

choose a figure between 0 and 5. The higher the

chosen figure, the higher the light sensitivity.

Aer this setting, briefly press i (< 0.3 seconds)

to enter the setting interface of backlight

brightness.

6 Display Backlight Brightness

When the speed field displays bL1, press +/- to

choose a figure between 1 and 5. The figure 1 re-

presents the lowest brightness while 5 indicates

the highest display backlight brightness.

Aer this setting, briefly press i (< 0.3 seconds) to

enter the setting interface of automatic o time.

7 Automatic O Time

When the speed field displays OFF, press+/- to

choose a figure between 1 and 9. The figures in-

dicate the minutes that it takes to automatically

shut down the display.

Aer this setting, briefly press i (< 0.3 seconds)

to enter the setting interface of maintenance

warning.

8 Maintenance Warning (can be deactivated)

When the speed field displays nnA, press +/- to

choose either 0 or 1. 0 disables the function

while 1 enables it.

Aer this setting, briefly press (< 0.3 seconds) to

enter the setting interface of password input.

The display will prompt maintenance necessity

based on such information as the accumulated

riding distance and the battery charge cycles.

• When the accumulated total riding distance

exceeds 5,000 km (can be customized by the

manufacturer), the display will show the symbol

. When SERVICE the display is started up, the

sign for accumulated riding distance will flash

for 4 seconds, indicating that maintenance is

necessary.

• When the number of battery charge cycles

exceeds 100 (can be customized by the manu-

facturer), the display will the symbol SERVICE.

When the display is started up, the sign for

battery will flash for 4 seconds, indicating that

maintenance is necessary.

• The maintenance alert function can be

disabled: settings / maintenance alert (MA) /

maintenance alert (MA) / 0. (Maintenance alert

can also be set via a computer. This requires a

USB connection. See also the parameter setting

instructions).

9 Further Settings: Password Setting

When the speed field displays PSd, it is a

prompt to enter a password. Press +/- to set the

four-figure password (using digits 0 to 9). Briefly

press i to

switch between the single digits of the pass-

word. The default password is “0512”. Briefly

press to switch between the single digits of the

password. The default password is “0512”. Briefly

press i to confirm your setting. If the set pass-

word is wrong, the system automatically returns

to the previous interface. If the set password is

correct, the system will switch to the setting of

the wheel diameter.

10 Wheel Diameter Selection

When the speed position displays Wd, press +/-

to select the correct wheel diameter: 16/18/20/

22/24/26, 700c, 28/29. The measurements are

in inches. A wrong wheel diameter can lead to

speed anomalies. Aer this setting, briefly press

(< 0.3 seconds) to enter the setting interface of

speed limit.

11 Speed Limit Setting

When the speed field displays SPL, the distance

field displays the value of the speed limit. Press

+/- i(< 0.3 seconds) to enter the menu of battery

communication.

12 Battery Communication

The speed field displays b01 and the distance

field displays the speed limit. Press i (< 0.3 se-

conds) to see the other information in sequence.

Aer thissetting, press i twice (< 0.3 seconds) to

exit the menu.

Note: Only when communication has been esta-

blished between the battery and the controller

the following information will be displayed,

otherwise the display will only show “- - - -”.

13 Information on the battery menu

Le collumn: Information Displayed in the

Speed Field; Right collumn: Explanation

b01 current temperature

b02 maximum temperature

b03 lowest temperature

b04 total voltage

b05 current

b06 average current

b07 remaining capacity

b08 full capacity

b09 relative state of charge

b10 absolute state of charge

b11 charge/discharge cycle

b12 longest period without charge

b13 period since last charge

d01 voltage cell 1

d02 voltage cell 2

dn voltage cell n

Beaufort Soho 2017 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Beaufort Soho 2017

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info