506088
9
Verklein
Vergroot
Pagina terug
1/11
Pagina verder
2. Program
Press program button for more than one second to enter program mode, the matching indicator is lit. Press
pattern to select desired pattern. Make a setting by menas of fader 1 – 8 and latch button and press program
button once to store the setting as a new step. Make a new setting and press program once again. If you have
entered all steps press shift + endstep button together to define the last step.
Example:
1. Press programm button for more than one second to enter program mode. The matching incicator is lit.
2. Press pattern or pattern and step or step till the display shows 11:01
3. Slide fader 1 to up position and the other faders to down. Press latch 9-16 to turn all matching indicators off.
After this setting press programm button once, now the LCD would show 11:02
4. Slide fader 2 to up position, others down, press latch 9-16 to turn all matching indicators off. After this
setting press programm button once again. The display shows 11:03
5. repeat steps one and two for all other faders till the display shows 11:09. Slide all faders to down position
and press latch 9-16 to turn channel 9 indicator on and the other indicators off. Press programm button
once. The display now shows 11:10
6. Continue your setting till the display shows 11:17, now press step button to alert 11:17 to 11:16
7. press shift + end step to define the 16th step to be the last step. Now the pattern is complete.
3. Assign program
There are 16 assign for the levels set by fader 1 to 8 and latch 9-16 buttons.
Example:
To assign CH1 to CH9 full on, and CH10 to CH16 blackout to flash 1 button, follow the next steps.
1. Press assign button for more than one second to enter assign program mode. The matching indicator is lit.
2. Slide fader 1 to 8 to up position, press latch 9 button to turn CH9 indicator on.
3. Press assign button first, then press flash 1 button. All channel indicators flash three times. Now assign one
is complete.
4. Patch setting
In patch mode, you could allocate easily the outgoing DMX channels to your light fixtures
Example:
To allocate 1-16 DMX channels to 16-1 channels, follow next steps.
1. Press patch button for more than one second to enter patch mode, the matching indicator is lit. Press
step or step till the display shows 01 in the right two digits.
2. Press pattern or pattern till the display shows 16 in the left two digits. Now the first DMX channel is
relocated to the level of the 16th channel.
3. Press step , the display shows 02 on the right side. Press pattern , the display shows 15 in the left two
digits. Now the 2nd DMX channel is relocated to the level of the 15th channel.
4. Follow the settings as specified by step 3 till the 16th DMX channel is relocated to the level of the first
channel. Press patch button for more than one second to leave patch mode. The matching indicator is off.
5. Run pattern in cross mode
In cross mode, the patterns are executed step by step by sliding the master fader up and down repeatedly.
1. In chase mode, press shift + cross setup, the cross on indicator is lit.
2. Slide the master fader to top position, press cross button to enter cross mode. The A indicator is lit.
3. Press pattern or pattern till the display shows 11:01
4. Turn the level knob to maximum, now the A indicator is full on.
5. Slide the master fader from top to bottom position, the patterns to be executed by one step and the step
counter to be increased by one (display shows 11:02). Now the channel 1 indicator is full on and A is off, B is
full. Slide the master fader up, the B indicator is decreased and the A indicator is increased in intensity. The
channel 2 indicator is increased and the channel 1 indicator is decreased in intensity. When master fader is
in top position, the B indicator is off and the A indicator is full on. The channel 2 indicator is full on and the
channel 1 indicator is off. The step counter is increased by one (display shows (11:03).
6. Repeat these settings to execute the pattern step by step.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw BeamZ DMX 016 Channel Console bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van BeamZ DMX 016 Channel Console in de taal/talen: Nederlands, Duits, Engels, Spaans als bijlage per email.

De handleiding is 0,21 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info